Reviews
micro mini head replacement Combi Hammer
Quality and texture information is a small hammer It can be used for many purposes and is intended to be used to disassemble the engine case Replace with design information Product # NO.9056 for multiple purposes Size chart information 180mm Cost performance and comparable price to other products, but at the right price WeBike packaging is always great, arriving in a week for delivery and packaging It is not a product that wants a big impact because it is smaller than I thought when purchasing. I think it is suitable for hand-made industries View detail
Wheel dirt removal
The sale price was lower, so I bought it to try it out.
Size and thickness-wise, it is easy to use and seems to le dirt removal. If the stains are too heavy, it is necessary to wipe off the stains with a new CROSS at the end of use.
After use, the Coating effect prevents stains from sticking. I would like to wait and see how it works, but I don't think it will be that effective.
Quantity:1 Set for 8pcs. so I couldn't use it all at once, I wanted a zipper on the bag. I guess it will be dry when I use it next time….
View detail
Buttons are hard, so operating them while driving is a bit dangerous.
There is a clock in the GSR Meter, but since it can only display one thing, I can't see the clock when it is in TRIP view, and it is a pain to switch positions at any time, so I bought this one.
I also bought one with a Thermometer and a voltmeter.
The size is small and good, but the button is just too hard. 。 And at this price of over 6,000 yen, I wanted it to be a radio-controlled watch.
Visibility at night is no problem at all.
The Large Gap on the watch is less than a month, but nothing special.
I think the attached Harness should have been about 300mm longer. 。 It seems that many vehicles probably can't reach LimitBATT, and I couldn't either.
The feeling of using the Others is neither particularly pleasant nor unpleasant, but it is a product that has been sold for a long time, so I think it has a certain reliability.
Personally, I had installed a Kaedere USB with voltage display function separately as a function, so the clock and Thermometer were enough, but this product is connected directly to the BATT, so it is a little fun to see the error.
The Thermometer is installed in a position that does not interfere with Cowl, Destruction and Wiring, but it displays about 2°C higher than the outside temperature system on the road.
I am not sure if this is the correct value or if there is an error in performance, since it is the same no matter how the position is changed, but I am using it as a guide.
And it's usually a clock display.
It is a reasonably priced product and I would like it to last about 3 years.
View detail
Spare
I purchased Body to remove plastic polish, scratches, and dirt from cowl and screen parts, but I thought that Included Parts:alone would soon be ruined, so I purchased this Spare.
I wanted only the replacement Buffing.
Brush is not used very often, so it was unnecessary, but Quantity:It is a Set, so there is no choice,
View detail
Cut
The price is not that much, and it has a good feeling of ease of use.
The handlebar is large, easy to grip, and easy to apply force.
It is also nice to be able to change the position of the blade with Slide.
View detail
Belt has no durability.
[How is it used?
I bought this for EngineO/H when Restore TZr50R.
I fixed the Flywheel with this product and removed the Crankshaft Nut and ClutchGEAR Nut.
Was the one you received as per Image?
The image was exactly as shown in the picture, and although there were several other manufacturers with similar pictures, Minimoto was the cheapest, so I selected Minimoto. I selected Minimoto because it was the cheapest price.
How was your experience with it?
The EngineO/H was successfully used and EngineO/H was successfully used.
However, Belt's durability was almost non-existent, and after a few uses, Belt's reddish coating was falling apart,
Although it can be used for a time, we worked with caution because shavings of the film could enter the Engine.
[Points to note]
When using it for engine O/H, the belt of the Flywheel side and the Holder must be degreased with parts cleaneretc. or it will not slide easily and cannot be fixed. Also, since the handle is short and it is difficult to apply the Torque, it is better to use a PVC pipe or similar to extend the length of the handle.
How did it compare to other products?
I have never used products from other manufacturers, but I have a feeling that the very cheap products sold on the Net are probably from the same supplier, so if you don't buy products from a proper manufacturer and price, you might as well buy Net products on the assumption that they will be crushed.
View detail
Vibration prevention
It is a re-purchase to attach to the Spring part used for the ChamberFlange part at the time of maintenance.
The product is not bad, but it would be helpful if the price per pc. was a little lower.
View detail
Oil replacement for two cars
It has a Nylon bag in a paper bag with a piece of cloth inside. View detail
Polishing
It is strange to polish by hand to remove small scratches and fogging on the plastic part, so I bought this to polish it easily and cleanly.
It is portable, uses 4 AA batteries, and is good for simple use, but the lack of a rotation speed switch and the lack of power are unavoidable for the price.
Also, Brush is subtle because it scratches.
Micro fiberBuffing×2 is also scary because the fabric is so thin that it might put scratches. it would be good for scratch polishing if Sponge or Felt type fabric is included.
View detail
nonfunctional
I understand that you use a syringe to decompress the Tank and suck it out.
It does not work at all.
In the end, it was a normal Air extraction while holding Lever.
View detail
easy to use
Durability and functionality seem good. Will be useful for future replacement. View detail
Nothing too good, nothing too bad.
This tool is necessary for pre-road adjustment of shock absorber.
Universal tool.
The quality, the feel, the price, everything is normal.
View detail
I would like it to be attached to Rim stripe if possible.
We have applied MDF rim stripe to several (5+) vehicles in the past.
I had to replace my car for the first time in 9 months, and when I tried to apply Rim stripe, I could not find a special Gauge to apply it, so I had to order it again from webike.
I purchased a 6mm width rim stripe and was able to install it without any problem using Gauge, but I would like to see it included or packaged with the rim stripe if possible.
I would also like to see 8mm and 10mm affixed Gauge produced.
View detail
Different texture from real leather, but looks durable.
I used it in comparison to the genuine leather ChammyTowel.
White water stains will form if not exposed to water well before Spec.
It is recommended to flush well with water stored in the Bucket before use.
Since the material is a little hard, I am a little concerned about scratching the painted surface.
However, it is also highly absorbent and does not harden after drying, so it can be folded and stored neatly.
The size is just enough to cover the top of the Motorcycle Tank, see image.
View detail
Does not become a DucatiOEM pig
The radius size was exact, but the position of the projection on the hand side was not correct, so I used a grinder to cut it off. There were several similar products available from other manufacturers of external products, and I chose this one because of its quality, but I am satisfied with its thick construction. View detail
Oil change
Used when injecting gear oil.
The Bellows one that comes with the Oil is fine, but this one seems better for Oil injection because it can be shrunk with Silicon and the angle is easier to work with.
It is not used that often, but it is an expensive product, so if you have 1 pc. you can use it for various purposes.
View detail
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
Plug replacement
This Plug wrench made the replacement easier.
It is very helpful to have it as an in-vehicle tool so that when something is wrong with the plug, I can immediately remove it and check it.
View detail
Fits: HARLEY-DAVIDSON , HARLEY-DAVIDSON , HARLEY-DAVIDSON Touring, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON Touring, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON XL1200C SPORTSTER 1200
Oil change
When I applied the Engine and drained the Oil, I couldn't tell the boundary between the old residual Oil and the new Oil.
Is it because they're mixing it up when they're refilling the Oil?
It was a little different from what I imagined.
I think the idea of the product is very interesting!
View detail
For Motorcycle commuting to school
Purchased for Motorcycle to use to get to school in the rain. Never used.
Tools are not objects, so the molding is what it is.
View detail