Reviews
The absorbent didn't absorb it. It overflowed.
The absorber didn't absorb and bounced the Oil and overflowed immediately.
The cleaning was really Large strange.
I will never buy again
View detail
11mm OD won't fit?
I used it on a Fuel Hose with an inner diameter of 6mm× outer diameter of 11mm, but the leak did not stop. View detail
Pressure leak in one year
After one year of purchase, the pressure can no longer be held.
Looks like there's a pressure leak somewhere! A disappointing product
View detail
I couldn't turn it on the GSX-S1000F.
In a small Space, you can use Filter. It did not. If you can hold it firmly with your hand, it will turn. I'm a little disappointed with my purchase. View detail
I pulled the wire.
When I installed the product on the Air Valve, I grabbed the handle and pulled it, the wire came off from the Air Valve installation part and it became useless.
It broke after the first use, so it was a waste of money.
View detail
I will not buy anymore
After replacing the Spring twice, the Screw mountain was crushed. View detail
Difficult to use
I've never used this kind of brush before, but it's hard to move and I don't feel like it's getting cleaner. I ended up using Nylon brush. View detail
worst case scenario
2.Used to replace 3L of Oil
There's supposed to be plenty of capacity, but Speed is too slow to suck it in.
Oil is leaking out of the box.
Looks like you have to take it to the Tray and then transfer it slowly.
I've been fine with direct acceptance on other products…
View detail
Not available
It's almost impossible to use it properly.
Garbage
View detail
It didn't work.
It was said to be available in 420 Chain, but it was not available. View detail
I think the quality and the caring of Manufacturer is too much. The text is just a complaint.
After purchasing the product and using it twice, I noticed that one of the LEDs was not lighting up.
By the way, I have not given any shock because it was new.
I immediately contacted WehBig and was told that it needed to be inspected and sent back.
I'm having trouble tuning in without it, but I've decided to ship it as if I had no choice.
11/19, Returned.
I contacted them to ask them to change to a newer one with a newer manufacturing date because the older ones with a newer manufacturing date break down sooner with the same breakdowns, especially this time on the first day of use and breakdowns with care, I had nothing but disbelief, although they didn't listen to me at all.
11/25, I think it arrived on 11/20, but they called to say it had arrived and they would have the Manufacturer inspect it.
On 12/11, about three weeks passed without any contact, and I contacted them to confirm.
A few days later, I received a reply saying that they would check with the Manufacturer.
On 12/16, my supplier informed me that they are checking with the Manufacturer and that it is likely to be a Limit return by the end of the year.
I thought Webig was the wholesaler, but I guess there is an intermediary, which is why it was so expensive.
He said he was going to limit by the end of the year, but I didn't hear anything from him.
Shipping notice on 1/7, arrival on 1/8.
In the end, it was a repair response.
It only takes me a few minutes to change one small LED.
If it takes 50 days, I won't send it in for repair, and I'd rather do it myself than send it in for repair, like this.
If you're so busy that you have to put up with customers, inconvenience them, and make them wait 50 days, then increase your staffing.
If you have to turn down a customer's request for repair, please think of us.
I feel cheated by Brand Kowa Seiki, I bought such an expensive product for the same amount of money, if I receive a fragile product, I will be dissatisfied.
I'm not sure what to make of it, but the box is a little beat up, the Number Label is peeling off, and the replaced failed LED is stuck on the box, but I have no idea what that means.
I wonder if the people who responded would think nothing of it if the same thing happened to them, or if they are sold by people who would think nothing of being sarcastic.
I can't stop being frustrated as to why I have to pay the same Gold amount and I'm the only one who has to go through this.
If you have a similar problem, you should ask the manufacturer for the part number and replace it yourself.
As the story goes, it's very easy to use.
The function that can be displayed side-by-side, the function that can be displayed in detail, the mechanism that does not need orifice, the resetting of the error that is unique to Digital, the accuracy that does not produce an error even if the outer surface is Rubber or the negative pressure is raised from the bottom to the top. 。
It's a shame that it doesn't have a battery system and no back light, GameBoy.
The product Ideas is great, but the quality is a waste, + the poor Alpha support ruins it.
I don't feel good about the new year.
View detail
I have not received my order without any kind of communication.
If you have it in stock, please ship it quickly. View detail
Durability ×
I used it for continuity testing, but unfortunately, it was not very useful.
The LED that emits a light when the device is switched on is right where it is held in the hand, so it is extremely difficult to see in bright light, let alone in the dark.
Also the durability was no good. I didn't bump into it, but the Minus line that Clip is attached to was broken from the root.
I thought the ordinary Inspection Tester was better.
View detail
Don't fuck with the customers.
I would never buy from this company, even if they are the only Manufacturer in the world. The customer service is arrogant and offensive. The corporate attitude is to be expected.
It's a local business and I want it to go away.
I would definitely not recommend it to everyone considering it.
View detail
Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08
The build is fine.
I bought it because it's a pain in the ass to get the in-vehicle tools out.
It didn't work on the R1100RS.
It's a shame that the R1100RS was included in the fitment.
View detail
He broke fast
I wanted to do maintenance on it, so I opened the package as soon as it arrived, put it in and turned it around When I tried, I had a sense of turning to Smooth, so I turned to a certain extent and tried to pull it out The protrusion was gone beautifully This happened less than a minute after opening the package
Will you be able to exchange it or deal with it?
View detail
The problem before the product
I made a phone call, but the man who answered the phone was unpleasantly surprised by the unfriendly manner in which he spoke to me The employee training was inadequate and the quality of the products made by such a company is to be expected I expected it to be a local company, but I would never bring it up for purchase again View detail
Poor quality
It's totally useless because the head is stuck and can't reach the Valve I bought it because it's a DAYTONA product and I trusted it, but it didn't work Disappointing View detail
Plastic Socket Strips at 40Nm Torque
Installing Matris Front Fork Cartridge kit F12RX when installing back on bike, socket stripped at 38Nm. @ Matris Please make a better socket harder plastic or Soft Jaw materials. View detail
400 yen, I feel like I've thrown it down the drain
Does it look and feel simple and easy to use? I put it in my shopping cart because I thought …
When I opened it up, the thinnest measurement wire came off when I removed the ShrinkFilm from the packaging I did
The two Rivet crimpers on the body were also inadequate, and I tightened them up with Hammer and Punch However, just to be sure (when you stop), with Caliper of the JIS standard product, the thickness of Wire is Is that what it says? Measurement …
As a result, it's a completely unrecommendable product
I'm giving it a no star rating because it's $400 and a waste of time and effort to return it
View detail