Reviews
Item not delivered
Item never arrived due to misdelivery. It was a waste of time to order. View detail
Oil leak
I have used many in the past, but this is the first time.
Oil leaked when I left the car overnight after changing the oil. 300cc leaked out and the garage was covered in oil.
View detail
I am Garbage.
I was expecting it to be dedicated to Bullet Type Terminal, but this is Garbage.
The Wiring and Clothing sections can only be Crimped at the same time in one time, so the positioning is very severe.
Even so, the Crimp section is so thick that it is almost impossible to see where the Wiring is located.
Even when it was finally done, the crimped shape was flat and uneven.
A Caulking Tool, which costs less than 1,000 yen, will give a cleaner and more reliable finish.
I used it a few times the day it arrived and it went to the Garbage bin.
View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
I wish they were a little cheaper…
Title is right I think probably all Users who bought this product agree with me lol.
I am a Rider who does not make any discovery, so this is my rating.
I bought it last year and have just used it and have no problems using it.
View detail
over-priced goods
The tip is thick and does not bite into the Clip.
It needs to be thinner to be useful.
View detail
Only OEM parts fit Honda vehicles!
The thing is nice, but only the OEM PlugRatchet fits Honda Motorcycles! View detail
Sorry if I'm not using it properly.
It snapped right off.
Because it's 16 degrees Celsius?
Because of poor usage?
View detail
It doesn't work …
It said that the Plug would not fall off with Magnet, but the magnetic force was too weak and it did not stick at all, and the rubber inside was too weak to hold the Flag at all. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300 SUPER FOUR SP, HONDA CB1300 SUPER BOLDOL SP, YAMAHA MT03, YAMAHA MT-07, YAMAHA MT-25, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR
What's up, DAYTONA!
I used their Filter wrench for 10 years on my XL1200C SPORTSTER 1200. It was very accurate and easy to use.
When replacing the filter on the NC750X, we had no hesitation in purchasing Wrench from the company.
Although it fits Firmly with no problem in accuracy, it slips paca-paca-paca when Torque is applied and cannot be loosened.
The steel plate is not rigid enough and seems to open its mouth.
I had no choice but to purchase a KTC casting separately. This one is a one-shot OK!
When I installed their ReplaceOil Filter later, I tried to loosen it with this Wrench to test it, but it still crackled & hellip;.
I know you are a longtime seller and there are a lot of users, but are you Large sturdy?
View detail
Driven Sprocket Replacement
I purchased this to replace a Driven Sprocket, but could not use it because the Nut seemed to lick when a strong load was applied.
I bought another socket (TONE hexagonal) at Home center and replaced it. The price was about the same.
I thought that a hexagonal shape would be more suitable than a dodecagonal shape because of the torque applied, but Webike did not have a deep hexagonal shape, so I had no choice but to purchase one. I used it once and will never use it again.
View detail
Stable quality
I used this bolt to hold the Rubber Bush on the ActiveGrip end. The Maziora blue color that can be seen in a glimpse is nice. View detail
I only used it once.
I locked Torque after using it only once and now I can't unlock it.
It's just overpriced garbage, don't buy it, don't buy it.
View detail
Different sizes
I ordered an expensive Screw with a lot of trouble, waited a long time, and when it arrived, it was the wrong Size.
And you can tell an M8 from an M5 at first glance.
View detail
Used to install ETCAntennas.
A nearby Motorcycle supply store is using it for ETC installation.
Can be cut with office scissors. It takes a little strength.
I am concerned that the ETCAntennas may peel off easily.
View detail
Does it serve the purpose of a dedicated tool?
I bought this to use on an overhaul of an old brake master as described in the product description. It is true that I can grab the C-ring at the back, but as soon as I grab it and try to pull it out, the tip part broke off.
Since it was used for only a few minutes, we wonder about its Cost performance as well.
I wasted my time and Gold, but I still decided to buy a special tool from ToolManufacturer.
View detail
It's impossible!!!!
Dustcloth is like a bath towel cut to the size of a towel, with fibers coming out from the cut edges.
I bought this for motorcycle maintenance and it is useless! I have used two sheets and want to return them. I have used two sheets and want to return them.
Please handle returns.
View detail
2022 Honda Ct 125 Fuel Bottle and Holder
Purchased the fuel bottle and holder for my 2022 Honda CT125. The advertised photos show the setup fitting nicely under the rear rack. The installation is done by removing the tool box and using the tool box screw holes for mounting. The holder I received is different than the advertised photo. My holder sits too high and the fuel bottle is about 3 inches too tall to fit. So far, Webike's response has been, "We'll get back to you." No further response. A waste of around $150.00. Don't buy! View detail
There was a hole in Vinyl.
The Corrugated cardboard box has a Vinyl bag (to prevent oil leakage), but there is a hole in the bag and oil leaked through it.
In the end, I had to use newspaper to absorb the oil and wrap it in a Vinyl bag.
View detail
Other people's impressions were correct. It is hard to use.
I was curious about this product, but apparently it was not the feel I was looking for. I found that the Brush that came with the Tane Cleaner was easier to use. I think it depends on how much you want to clean. I think that people who use TEHN Maintenance are the ones who want to make it polished, so I think that a bristle brush with moderately long and soft bristles would be better. The included Brush was easy to use. View detail