Reviews
For the do-it-yourself maintenance group, this is a good one to have.
Restore of immovable ESTRELLA.
Final touches, Tappet adjustments.
Oil leak is gone but Engine noise is annoying.
However, I need to prepare Thickness Gauge for Tappet adjustment, so I bought this one.
[What happens if I don't make the Tappet adjustment?
Of course, if the tappet noise is too loud, it will bother you, but if you leave it as it is, the wider the gap, the stronger the impact of the blow, and the tappet clearance will widen more and more, which will cause the starting performance to deteriorate and the motorcycle to gradually go out of tune, so adjustments are necessary. 。
What is a mismatch in Tappet clearance?
When the Valve clearance (Tappet) gap becomes Large, a hammering sound begins to be heard. 。 Sound is emitted when Engine is cold, but disappears when warmed up. 。 In such a case, the gap is large, but as it warms up, the gold expands and the gap becomes small, and the sound disappears.
Symptoms
When I stopped at a traffic light, the car stalled while holding the clutch and dropping the GEAR.
In accordance with the Fat Engine Rotation "Tinkle, tinkle, tinkle." and strange noise.
Procedure 〜For ~ESTRELLA
(1) Unload the Tank from the vehicle body.
↓
(2) Cook must be Off 。 By turning it Off, you can lower the hose without wasting Gasoline dripping out (some Gasoline in the hose will come out immediately after the hose is removed).
↓
(3) ESTRELLA can be adjusted to the upper dead center by removing the Cover and turning this Screw. 。 Top dead center is simply the state where the Piston is at the top.
When adjusting the tappet, the position of the piston must be adjusted to the upper dead center. 。
↓
(4) Remove the Plug so that no compression is applied.
I have to move it with no Engine on it.
↓
5) Front Tappet Cover. 。 It can be adjusted by removing here.
↓
(6) Loosen the lock nut attached to the head first, and when the center screw can be turned, it is OK. 。
At this point, it is normal to move the Tappet by hand and hear a chica-chica sound. 。 If it does not sound kachica-chi, either the upper dead center is not correct or the adjustment is gapped considerably.
↓
(7) Insert the Thickness Gauge into the gap and align it. 。 Strictly speaking, this is the process of adjusting the gap between the Valve and the Arm that is pushing the Valve to the proper value.
↓
Clearance on the exhaust side is 0.17 to 0.22mm 。 If the Gauge is pinched by inserting 0.20mm of Thickness Gauge and closing the Screw at the Center, the Gauge will be pinched, and if the Gauge is moved in that state and it feels a little stuck, it is OK. 。
↓
Clearance on the intake side is 0.10 to 0.15mm 。 The intake side may be a little more difficult to do because it is more intricate in location.
↓
(10) To be sure, make one more rotation of the screw with the upper dead center aligned, and then align it again.
[After adjustment
When I drove it, it no longer stalled and blew up better!
I think a single cylinder can be done by an amateur.
View detail
A gem and a masterpiece
Replaced a set of 4 KOWA T-Type Wrench up to 8,10,12,14 after several years.
Although I have been working with KTC and Kohken, I can say again that KOWA is the best fit for TWrench.
According to Large's senior maintenance staff, in the past, whenever the Japan GP was held at Suzuka, overseas mechanics used to come to Large's tool shop to buy only KOWA's TWrench, which makes sense.
There are a few important areas in TWrench, but the welds are weld treated or there is no spatter on the weld bead at all as shown in the photo.
This smoothness leads to a sense of security while working, because it is the soft area between fingers that touches here.
The surface treatment is pear-shaped, and when wiped with wet tissue, the finish is such that the fibers are uprooted.
Everyone may have their own preference for the center of gravity balance, but in my opinion, this position is one answer to the question.
Although there are now products that exceed the thinness of the Socket, they seem to have settled on a balance of sufficient strength and thinness without pursuing excessive thinness that is not necessary.
In fact, I have never encountered a situation where I would want to use TWrench that would not be Accessible with this thinness.
The slimness that fits comfortably in your hand, the length of the handle, the length of the arm, the thinness of the Socket, and the center of gravity are all excellent, and I will probably keep buying the same one even if this one breaks in the future.
View detail
scratch-resistant
It is used for removing and attaching parts that you do not want to damage.
Size, it seems to be good in terms of weight and can be tapped without scratching.
It is useful to have different sizes so that you can use them in different ways.
View detail
scratch-resistant
I purchased a plastic hammer to avoid scratches and damage when removing hard assembly parts.
The weight, Large size, and ease of use seem to be good.
View detail
Quantity:Cover Honda vehicles with the OEMSpecial Tool from Set
OEMSpecial Tool so you can service it with confidence! View detail
It is a self-sufficient tool.
These tools are from KOWA, which was the distributor of Honda OEM accessory tools.
(Current OEM accessory tools are not JAPAN)
It is a 6P and 12P Glasses Wrench.
It says HONDA on it, so if you like Honda, you can buy it.
There are plenty of other tools that are cheaper and better.
There is no need to dare to buy this.
It is for Tool Mania.
View detail
This is good.
Used for overhaul of front fork of ZX-14R. I was able to work on it without scratching it at all. This is great. View detail
Longed-for Kowa T-Type Wrench
Cheap and easy to use, Commendation but not easily distributed. View detail
Genuine Honda Part.
This is the oil slinger flywheel tool called for in the factory manual. It's perfect fit and like every genuine Japanese tool Ive ever used including woodworking, It's flawless. View detail
As expected, OEM Product
I purchased this to remove the Rotor on my GB250Engine. Since it is an OEM product, I was able to remove the Rotor without any problems.
It would be great if we could get it for a little less.
View detail
A must for Valve clearance
I purchased this for Valve clearance adjustment.
The part requiring Thickness Gauge is essential because it is not possible to measure it with other measuring tools such as Caliperetc.
Kowa Seiki is a company that I had not heard much about, but it is a very long-established tool manufacturer established in 1952, and it seems to be a company that manufactures not hand tools that we ordinary users use, but special tools and equipment that motorcycle and automobile factories install as equipment. It seems to be a company that manufactures not hand tools for us ordinary users, but special tools and equipment that are installed as equipment in motorcycle and automobile factories.
Unlike Dial gauge and Micro meter, Thickness Gauge does not deviate so much.
However, if rusting occurs, the thickness can easily change with rust, so only that point should be noted.
Since it is not a tool that is used so routinely, it is better to store it in Vinyl after use with a rust inhibitor, or if not available, a lubricant smeared all over it.
It has been about 10 years since I purchased it and it still remains rust-free.
View detail
Front sprocket
Used to stop the front sprocket of CUB series. Try this useful tool once! View detail
For drilling
Used for positioning when drilling holes.
Easy to type with one hand and convenient with strong and weak adjustments.
The frequency of use is occasional.
The selling price is a bit expensive, but having 1pc. is useful for drilling holes.
View detail
it uses for parts washing -- it is cheap and convenient.
it uses for parts washing -- it is cheap and convenient. View detail
Please never buy it. Because something does not suit the air zipper 22.
Please never buy it.
Because something does not suit the air zipper 22.
View detail
Easy to use
Even the tip of the pliers is elaborately made with an easy-to-hold, non-slip Grip.
Quality is high for the price.
It is useful because it is easy to use for everyone and is a standard type of radio pliers.
View detail
Torque wrench at last!
[How is it used?
I have been tightening the brake disc, caliper, and other important parts by hand for a long time, but I finally purchased a new one.
Was the one you received as per Image?
Yes
How was your experience with it?
You will want to Torque wrench everywhere.
[Points to note]
When storing, store at a lower level than the low value estimate.
Spring, etc., so that Torque settings do not go haywire.
How did it compare to other products?
Compared to KTC and others, the same.
It costs a few thousand dollars and is rarely active, but it is fun to work with. It's safe and you can learn the Torque sensation.
View detail
To adjust valve clearance
The feel is perfect.
After use, moisten it with engine oil and place it in a small bag to prevent rusting.
View detail
Awesome Tool
Well pleased with Webike, been wanting this Kowa t - handle for several years. I should have purchased this tool long before now!! View detail
No Case in the listed photo
This is the first time I've seen a single body on the market. View detail