Reviews
Solid easily adjustable but sprockets smaller than I required
This tool is multi-purpose; You can use it to remove the variator, flywheel, front sprocket and clutch. This was purchased to enable me to remove the front sprocket for bike. Although it did work, it was rather fiddly to use and the assistance of an additional pair of hands to held was needed. Product solid and quality.The tool itself is looks as though it will last long time. View detail
Material:It is Stainless Steel, so it is durable!
[How is it used?
I bought it to replace the Split Pin on the Rear Tandem Footpeg and the fixed Bolt on the Rear brake.
Was the one you received as per Image?
The quantity is small, but the quality is fine, as per Image.
Was the installation difficult?
The Split Pin is simply replaced with a Split Pin for easy installation.
How was your experience with it?
Steel ones rust quickly, but this Pin is Material:It is Stainless Steel, so it will not rust and is durable.
[Included Parts:were they on?
There is nothing else as shown in the image.
[Was there anything that disappointed you?
Nothing in particular, but the quantity may be small.
▼ I would like to see One size and TwoSizeSmallest Pin included in the Lineup already.
View detail
It worked!
[How is it used?
I purchased this to remove the Pulley area of my PCX125 JF56 as part of a drivetrain refresh.
Was the one you received as per Image?
It was solid and sturdy as per Image.
The weight was quite heavy.
How was your experience with it?
It worked normally. However, I think it was replaced by Air impact, so I didn't have much of a chance to use it.
I would use it again when messing with weight roller etc.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
As an old Motorcycle Spare
Since Fuel Hose and Fuel fliter were purchased, Band was also purchased,
Unifying Manufacturer gives a sense of security.
View detail
I have been using it for a long time because it has a good fit.
I have been using it for a long time because it has a good fit.
I usually use Black, but it seems to be out of stock, so I bought this one.
I am always worried about rust since it is not Stainless Steel.
Material of the same Size from before.:Waiting for Stainless Steel.
View detail
Peace of mind knowing the status of Battery
The battery for two-wheeled vehicles is smaller in capacity than that for four-wheeled vehicles,
Access to BatterySpace is so bad,
It is difficult to know Condition easily.
But with this product,
Highly accurate voltage information can be obtained via smartphone.
Use with Battery Charger,
Even Motorcycle without Kick starter,
We have been able to use the system without excessive worry about battery uptime.
The same product would be used on two Motorcycles,
If they are parked close to each other, there is a possibility of mixed signals.
If improved, it will be easier to use.
View detail
Used in RZ250 Fuel Hose replacement
I also bought Clip to go with KIJIMA's Hose that I purchased.
I matched it to the diameter, but did not use it this time for fear of Gasoline leakage because the Clip was not nearly as effective as the diameter of the Cook's Nipple when it was installed.
The same product is bundled with KIJIMA's Hose that I purchased, but the diameter of the clip is slightly different from this, or maybe the included clip works properly and is usable.
I bought it with peace of mind because of the claim that it could be used with phi;00 Hose, but this time it was a disappointment.
View detail
Bottle will be dented.
I purchased this product because I wanted to do the Fluid replacement myself.
As per everyone's impressions, use a syringe to set the Bottle's air pressure.
If you lower the Lever, the Bottle will be dented.
It may be better to work while niggling.
View detail
Harnessfor repair or minor tear repair of sports bags
The harness tape on the bottom of the tank deteriorated after six months, so I chose this one, although it is a bit expensive.
As a result, I was generally satisfied with the texture (I had imagined it was stiff like E Corp.'s Binding Tape until I actually received it).
The adhesive strength is solid, and once it is applied, it cannot be removed easily, so it can be used in tough places.
It seems to me that the method of reinforcing little by little while shredding rather than rolling all at once is more suitable.
However, it is not flexible and cannot be used for moving parts. If you want to use it for moving parts, it is better to wrap it with Cell Wrap and use this Tape for fixation.
This is a slightly unusual use, but it can also be used to repair a slightly frayed sports bag, etc.
Waterproofness was not specified, but it is expected to be waterproof enough unless the product is constantly immersed in water.
View detail
Used to connect to Vacuum gauge
[How is it used?
I bought this to convert a Vacuum gauge because the diameter of the Hose did not fit when I tried to install it.
I am satisfied with the use of the product, especially with no leaks.
Was the one you received as per Image?
Yes, it is Joint and Clip as shown in the image.
How was your experience with it?
I was able to use it without any problems.
[Points to note]
Not particularly
View detail
You need multiple Large bodies, so the result is a bit more expensive.
The inner diameter of the Fuel Hose is 4mm, and we could not find a suitable Fuel Filter,
The outer diameter of the Filter side was 5mm, so we converted the Hose of the Filter section.
It was made of Gold genus, seemed durable, and came with a Hose clip.
1 pc. seems cheap, but I think I will have to buy more than one because I need to convert it back after converting it with Large body Pattern.
View detail
Sub tank to carburetor for connection
I bought it because the hose diameter of the Sub tank was different from that of the carburetor.
Now you can connect to the Sub tank and carburetor without any problems.
View detail
I can see the voltage of the Motorcycle with the Cover on from inside the house!
[How is it used?
In winter, I ride less frequently and am concerned about the condition of the battery.
My beloved Z900 is stored with the Cover on, so I can't be bothered to take the Cover off in the cold, remove the Seat, and measure the voltage with the Battery checker...it's too much trouble!
(The Z900 early MODEL does not have a voltmeter, so it is Large strange.)
That's where I found this product. This is good! I thought it was a little expensive, but I installed it. (It cost over 6,000 yen when I bought it)
Was the one you received as per Image?
The code is Quantity:2pc out Material:The plastic small box, which does not have a luxurious feel, was as expected.
Was the installation difficult?
Simply loosen the Battery terminal and insert the Crab terminal and tighten.
The degree of difficulty may vary depending on the battery mounting position, but the Z900 is extremely easy.
How was your experience with it?
While in my room on the second floor of my house, I can check the voltage and battery status of my car, which is parked in the parking lot below me with the cover hanging, using my smartphone.
This is handy!
When used while running, it displays 13-14V, indicating that the regulator is working properly and charging. When used while charging, it displays about 14V. Charging. You can rest assured that it will be displayed as
[Included Parts:were they on?
Double-sided tape for fixing the Body was included.
[Was there anything that disappointed you?
Since it uses Bluetooth, sometimes it is difficult to recognize the Device when the application is launched, but I think this is unavoidable.
Opinions and requests to Manufacturer:.
I would like to install it on my other car or CAR if it were a little cheaper, since I can manage multiple cars with the app.
View detail
KIJIMA Position unit
KIJIMA's Position Unit was installed to convert Gixxer 250's Blinker into a position that always lights up. View detail
Read the instructions for use and use tools correctly!
This tool is ideal for brake fluid replacement.
A Base is also included to prevent the Tank from falling over.
Fluid can be firmly removed by applying a certain amount of pressure.
However, care should be taken not to apply too much pressure, as the Tank may dent and break.
Since brake fluid is considered industrial waste, please dispose of the waste fluid after replacement at the nearest service station, motorcycle shop, or PartsShop.
View detail
They are items indispensable to oil supply of a wire for the time being.
They are items indispensable to oil supply of a wire for the time being. View detail
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out?
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out? View detail
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently --
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently -- View detail
Good!
There is no explanation of how to use it, so at first, it is a bit difficult to understand. But once you know how to use it, you will be able to use it. I see. This is the case
It is not used that often, but it is useful to have.
View detail
Easy to use
Just a Graduated cylinder
Purchased for Fork oil weighing
The construction is adequate, so it will be used for a long time.
View detail