Reviews
One can be used for air bites, maybe.
Brake fluid is replaced and used to drain the fluid when air bites.
Once the Brake is inserted into the loop, it can be fastened with a special pin or tied with a needle gold so that it cannot be wiped off.
The front side of the tank is above the tank and gravity will cause it to fall down to a certain extent, but the rear side is almost parallel to the tank, so it is sometimes difficult to get out the tank.
It is a delicate item.
If it is completely air bitten and the Lever and Pedal are completely scoured, there will be no Fluid because there is no pushing force. This syringe type aspirate is not powerful enough.
At that time, if you can connect VacuumGoods or something, you can make it work, but if not, just take it to the shop. (Lol)
They did a full Route exchange at Red Baron for $3,160 for just the Rear. (Lol)
View detail
Preliminary Tank
Used for mower The angle of the Pipe at the oil supply port is just right easy to use. View detail
Preliminary Tank
The design is great, but I have a few complaints.
(sentence end) indicates emphasis, agreement, request for confirmation, etc.
View detail
Just in case.
I bought this to alleviate my fear of running out of Gas since it does not have a fuel gauge. I like the quality and feel of the product. The durability needs to be checked in the future. View detail
Easy to bleed air
It is easy to bleed air when used for maintenance of the brake.
It is also very helpful because it can be done in a short amount of time and can be done reliably.
View detail
strong
I bought this for emergency use to go on forest roads.
I feel that the mouth Packing deteriorates quickly over time.
You may want to have the Material changed a bit more. I changed it myself.
I like that it's sturdy, but...
It is slightly heavy and may need to be carried with care.
View detail
Easy to air out.
This is a syringe for air bleeding which is indispensable for overhaul and maintenance of hydraulic brake and hydraulic clutch. It is very efficient because it can release the air in a short time. View detail
Useful Syringe
[How is it used?
I bought this for Brake fluid. The purpose is to remove the fluid in the master cup.
I keep it in my Tool Box (not the same as a tool box).
How was your experience with it?
It comes with a Hose and is ready to use. It's well made and this one is all I need!
How did it compare to other products?
I used to wipe it off with Dustcloth, which was inefficient, but if you use it 100 times, it should be more economical than Dustcloth...! LOL!
[Points to note]
After you are done using it, flush it with water and let it dry.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Enough for the Sunday mechanic.
I bought this to use on my TZr50R Brake master Overhaul.
The deciding factor in the purchase
I was not sure if it was a three-pronged type. I bought this type because I was worried that the C-ring of TZr50R's front side brake master might not be able to be removed.
I also chose this replacement Type because it was cheap and I had used other products from Ethos Design, so I could be assured of its accuracy. (The other ones are the same color and shape, so I have a feeling it's OEM from somewhere else.)
[Impressions of using it]
First of all, I was able to take the C-ring successfully.
The tip was solid and there was no C-ring flying off in the process.
However, as mentioned above, the C-ring is quite deep, and as it was, it interfered exquisitely and could not be grasped, so I was able to use it by shaving a little.
I haven't used it on the for Shaft C-ring, but I think I can use it there without any problem.
I would like to see some improvements.
It becomes a personal thing, but because I was able to work smoothly if it was made small even if it was 0.5mm more overall, I felt that it was even better if it became Small Type.
Also, I would have appreciated a bag or Case for storage as I had nothing to put it in after the work was done and my nails would have been RoseRose.
Products compared
I compared this product with KTC's and SIGNET's Pliers. I decided to buy this product because of the function, price, brand, delivery time, etc.
When I was writing this impression, I noticed that KITACO and Professional tools are also offering the same thing, so I think it is good to compare them according to the stock status and price.
【Review】
I think it is a good product because it is easy to use, low price and can be used both for Shaft and for Hole.
I thought it would be good to compare the delivery time and the price because the same product comes out from each Manufacturer.
View detail
Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
Good shopping was made
I love how easy it is to use. I wish I had purchased this product when I did as I expected it would be very useful, I would hate to think what I would have done without the Syringe. 、、、、
It's a great product to have.
View detail
ETHOS Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
ETHOS Ethos Design:A43050
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
Ethos Design Air Venting Syringe
I used it for Brake fluid, I don't know about Gasoline because I didn't use it. Hose outer diameter is 7mm, inner diameter is 4mm, and it's rubber, so it's stretchable. View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
Air Venting Syringe
If Fluid is injected from the Caliper side, Air in the Hose rises with Fluid, and air release can be performed quickly. It is a pity that the hose is short. View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is also easy to suck out air and fluid from Caliper side.
View detail
ETHOS Ethos Design Air Venting Syringe
If fluid is injected from the Caliper side, the air in the hose rises with the fluid, and air can be released quickly.
It is very easy to replace the fluid because it is easy to suck out the air and fluid from the Caliper side. It's a great product, but I wish it had a little bit of Hose.
View detail
Smallish and Design is nice.
Gasoline Carrying Can is often martial, but this one has a nice paint job and a bit of a stylish shape. However, because the Nozzle shape is protruding, it is not the form that is suitable for carrying on a motorcycle for emergency use. Also, I am a little worried that Nozzle may be bent or broken when it is hit. I use it to buy Gasoline, which is necessary when I wake up the immobile car, so it is good. View detail