Reviews
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
For Chain exchange.
Used to replace Chain in 428 Size.
It is convenient to have multiple Adapters and to support various Chains. The texture is cheap, but the whole thing is rigid, and I think Large things like Pin are well made.
If you only need to replace it once, it is cheaper to ask a supply store, but doing it yourself is simply more surface white and satisfying. Durability is unknown.
View detail
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
Commonly usable
It is not difficult to use and can be used normally.
In the usage situation, the handlebar is removed from the vehicle body, the handlebar is fixed in a vise, this product is installed, and the cut is performed.
It is not a tool I use often, but I think it is worth the price.
View detail
It is inexpensive and easy to use.
[How is it used?
This tool was used during Tire replacement &Puncture repair work on a Dual Par Pass car.
We are currently using PROTOOLS' Air Valve Puller, but we used this product before that.
Many Dual PurPass vehicles that enjoy mountain play and forest roads use a Tube in the Tire, so these Items are very useful for getting the Valve of the Tube out of the Valve hole in the Rim.
Wire is thin, so please be careful when working with it, as the Wire clamps that hold it in place at the handles can easily come off or break if it is pulled with too much force.
Did you receive the item as per the Image?
Material:The aluminum and simple design of the handle makes it very easy to use, and its compact size makes it highly portable.:I always had it in my Set, it is just like the Image.
How did you like it?
Once you get the hang of it, you can easily pull out the Air Valve in no time at all.
Especially in winter, when tires become hard, I can't do without this product because it is so useful that I don't feel like doing it without it.
[Points to note]
After fixing to the Valve mouth because the Wire is thin Forced by brute force." Be careful when trying to pull it out, as it may come off from the clasp or Wire may almost break off, making it fragile.
If you search for DRCAir Valve Puller in the product introduction section of Webike, you will find a video at the bottom left of the introduction section that explains it in an easy-to-understand manner.
How did it compare to other products?
The wire part of this product was getting badly warped, so I bought a PROTOOLS Puller from Webike at a lower price at the time of replacement. I think I will go back to DRC's Puller when the Puller I am using now is no longer good. (Possible individual differences) 。
Other items that would be helpful
Point and hang of installation
With your free hand, press lightly on the backside of the valve of the tube toward the rim while guiding the tube.
The rest, as I mentioned above, you can watch the video.
Basics We're not in a hurry. We're going to do our job well and reliably." is the best shortcut.
[ITEMS TO BUY TOGETHER
Since this is used when replacing a tube-type tire, you will need to prepare a lever, BEETWax, and inflatoretc. for tire removal and tube replacement (you will also need a removal tool to get to that point).
[Opinions and requests to Manufacturer
It would be nice if you could use a stronger wire to ensure durability, but we would be grateful if you could just keep this product in the lineup.
View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail
Good quality and fit. Needs more adaptors
Don't buy a cheap one! These work, and trust me, you want it to work when you need it. If a pin does break, they are easy to replace but most likely it won't unless you aren't using it properly(read the instructions if you've never used one). I had the unfortunate issue of breaking one of the punch pins, as the instructions say to place on pin and push pin out the otherside. The instructions do not tell you to grind the pin head down before attempting to push out. Great tool, and a must for anybody who maintains their own bike.I broke two chains with this in 5 minutes by myself. Just get it. Even though they recommend grinding out the back of the rivet I didn't and it just worked. Well worth the cost. Just like all of DRC's tool this is nicely made and you can tell it's a quality tool by I get of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Good tool if used as intended.
outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tube clamp can be placed in the vise anywhere along its length, not just by the fork dropout. Using the outer fork tube clamp is as easy as sliding it on the fork stanchion tube, tightening the threaded lever and holding the fork vertically while loosening the fork cap or base valve. Additionally, you can lay the fork on your workbench with the long arm of the tool stopping the fork from spinning by bracing it against the bench with the tool’s long arm. The DRC/Enzo outer fork tube clamp makes that possible, easier, cheaper and safer.Good price fast delivery worked perfect.Highly recommend View detail
Great tool if you have many bikes
I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cleanup is a breeze. Very nice and well built tool.works extremely well. The inserts are a very hard plastic. I saw no deflection or deformation during use, but nice in that they are not metal so no tube marring or scratching potential. Metal outer collar is nice and heavy. The metal collar does not snap together, so if you are not holding the tool, it will split. I didn't find this to be a problem, but thought I could use wire ties if needed to hold the shells together.Great product.Webike too fast.packaging is great, delivery is fast.you may not be my friend but you can take the recommendation if you like.Have a great day View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
Worked great, simple and easy.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, so you may need soft jaws or something else to hold the fork tube. I will probably use tools for loosening and final tightening of the fork cap, but will continue to use these for removing the inner cartridge. A must have tool if you work on your own bike. Just like all of DRC's tool this wrench is nicely made and you can tell it's a quality tool by the weight and feel in hand. I get 95% of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Handlebar makes it easy to grip and apply force
I purchased the DRCChain toolPRO for my first ChainDIY replacement.
As a preliminary knowledge, we watched the Chain replacement process on YouTybe and decided on the DRC product, which seemed easy to use.
The handlebar of the product was easy to grasp and support, so I was able to work stably.
The actual work was also very smooth due to the simple configuration of the product, and chain cutting was easier than I had imagined.
I think it is moderately excellent.
View detail
DRC Chain Tool
I bought it to replace the chain myself. The manual is in Japanese and English. The manual kindly guides you through all the processes, so even those without expertise can replace the chain. There is a storage space on the handle, so there is less risk of losing parts. View detail
I need a scale.
I had a Front Fork Oil Level Gauge that was a big dropper with a Memory attached to it, but it was damaged over time. I bought this one, but I think I prefer the one I had before. I wish it had a scale, but I guess that would have increased the price, so I didn't put it on. View detail
textured good feeling
Purchased as a Tirefor replacement, I chose it for its visual quality. View detail
No problems at all.
Purchased for Tire replacement. No problems at all. View detail
If you want to build a Tire with Tube, this is the one.
It is useful to pull out the Tube type Air Valve with ah-ha.
However, the Type Puller, which uses leverage, is better for use with Air Valve for Tubeless.
View detail
Beautiful construction
Shape not available in Homsen, used for the exterior of Meter visor. View detail
Great Valve Core Remover
This is a very well made core remover. The finishing is excellent and having a steel core tip means it wont wear or deform like Aluminium tipped items will. It also makes it more positive to use. The small hole in the handle allows for the use of additional leverage if the valve is very stiff or tight. DRC makes some very nice products and this is one worth buying... View detail
Commonly usable
The price is cheap and the quality is good. No complaints. View detail
Gets the job done!
my only critic would be that the writing for me was small and had to really focus to gauge my levels. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail