Reviews
This is a RECOMMENDATION for people with a LARGE head!
I'll be right there. I bought this helmet exclusively for use on my ThirdMotorcycle moped. I have a large head and even a size XL helmet feels tight, but with this helmet I can wear it with room to spare! I am really happy! (The matte black color is cool and the contents are well made! View detail
It is a rare and rare big size half cap!
My head is Large size so I have a Big size Just a quick Scooter ride to Convenience. I was looking for a helmet for my son and purchased this one. The chinstrap is easy to put on and take off with the one-touch system. "Spit This is the perfect helmet for those who are looking for a half cap in a large size! View detail
To prevent the Helmet from shifting.
With my previous Helmet, I had a headache due to Gap while Riding for long periods of time, but the Adjustment Sponge has eliminated this problem.
This product is also comfortable on hot days because Sponge absorbs sweat.
The helmet fits snugly and is comfortable to wear, allowing you to concentrate on your riding, which is doubly safe and secure.
View detail
Here’s some fitting instructions
I've been using throttle paddles from various manufacturers over the years & while typically effective in general- they tend to either be low cost & cheap looking/a bit flimsy~ or expensive and good quality plastic & strong, fairly rigid construction. This product is a curious one. It's price is very low & the plastic quality is excellent. The only real issue is that it uses a rubber strip instead of a rubber tube to fit between the handlebar grip & the paddle body to provide friction & prevent slippage. ~ this rubber strip is challenging to install as it needs to be initially fed inbetween the grip & the paddle..I recommend a pair of long nose pliers for this task. Once some of the rubber strip is partially fed in- turn the paddle & it will pull the rest in. Take your time setting up the paddle- start a little low & working it up in increments. If you rotate it too much the rubber strip will come out & you'll need to start the whole process again. On the bright side- once it's properly set up, it won't slip at all. View detail
Good for the price!
Satisfied with Large. However, 1 pc of the 6 screws included had no screw threads. I didn't use it for M8, so there was no damage, but I realized that the inspection level is different from made-in-Japan. It is a pity because the product itself is good. View detail
Red BaStar
Helmet worn by Hiromu Sakurada of SUPER Sentai Series and Goba Stars. (See the photo below.)
Matte Black is used in the production, but it has been discontinued, so Black is usually purchased.
*Please note that this is for 125CC or less.
When running with the Shield lowered, the wind is firmly shutting out and visibility is excellent.
The design is such that the ears will stick out, so it may be a little cold in the winter, but you can be a Red baStar, so go strong.
View detail
MidlandIncome can be used with Installation (individual differences).
I bought this for my Small3 daughter to use, and decided on the design, etc. based on her wishes.
Since we are using Midland's Income, we also installed Speakeretc. on this Helmet.
Income was purchased in a twin pack, and the remaining extra parts (Microphone etc.) were used for this helmet.
The parts that were missing for installation on the helmet were a clip-type mounting clamp, mount, and speaker (the mounting clamp could have been handled by an extra seal-securing clamp, but I didn't want a seal-securing clamp, so I purchased one), (The mounting Clamp could have been handled by an extra Clamp fixed with a Seal.)
My concern is that the Speaker will not put pressure on the child's ears. This Helmet has a Space for the Speaker, as does the Helmet for the Large person. Hollow." are few and far between. In addition, we did not want to spend too much money on the Helmet because we assumed that the Helmet would change as the child grew up, so we chose a Speaker that was not the Speaker for the MODEL we purchased, so our concern was Large.
When I had my child wear it, there seemed to be no problem, and in fact, no complaints were made even after wearing it for over an hour, so I don't think it is a problem.
This is only a reference point, since this is where individual differences are Large tight, but a 9mm thick Speaker seems to be Large sturdy.
View detail
Looks just like the OEMMirror from VANVAN90!
I used it on a VANVAN90 Restore that I got from my friend's father.
The OEM Mirror screws are of course no longer in production, so I tried to find a good used one, but they are being sold at a ridiculous price. I don't want to buy from those malicious people anymore, so I was looking for something similar to the OEM and the shape, and I found it here.
Our VANVAN90 still has the Only RightOEMMirror, so we removed it and polished it like a demon with PIKAL, and used this for the missing Left Mirror.
The shape is exactly the same, so there is no sense of discrepancy. The only difference is that it does not have the SEA BASSOEM SMark engraved on it, so it is comparable to the OEM Mirror unless you get close and look closely.
Quantity:Pair (for Left and Right) So, RightMirror will be Stock in case the Original Mirror you are currently wearing decays.
We do not recommend it to those who are concerned about NumbersMatch, but we highly recommend it to VANVAN90 users because it has the same shape and can be purchased at a reasonable price.
View detail
I think it's a great cosmetic.
It is well made for a cheap price.
I turned up the protective cloth on the surface to look inside and found a solid and quite thick Wire with a solid key Image.
To be honest, I don't know if it will prevent theft.
I think it is good because just by putting it on, it makes people think that they are being protected.
View detail
It is used in Delvery.
I used to use a winter full face for delivery, but I bought this for summer delivery. Last year and the year before, I used to deliver without a half cap shield, but with this one, I can deliver easily even on rainy days with the shield attached.
This Helmet is recommended for commuting and delivery.
View detail
difficult
The Large size is useful for touring use, but this kind of product ends up breaking due to lack of strength. What is strange is that this kind of product does not have Material:The lack of Carbon. Carbon, which absorbs vibration, is flexible and strong, and should be an excellent material. View detail
It is easy to use.
I used it to adjust the interior of X-lite's X-803 RS.
I had the fitting done at the FiveStar store, but after using it for about a year and getting used to wearing it, I purchased this item to make it tighter.
The feel is good, and the double-sided tape is rather strong and can be applied firmly. The tape is wide, so please cut it as needed.
This time, we increased the top and back of the head area, and also increased the cheek pad slightly.
I checked afterwards, and the fine tuning was successful and made it difficult to Gap even in the Circuit speed range.
X-lite costs about 9,000 yen for the Cheek pad alone, and it cannot be fine-tuned, so having a product like this is very helpful.
View detail
Unfortunately, I cannot paste it well.
It was difficult for me to paste it into Helmet.
The glue is sticky and does not come off cleanly.
Adjustments are also difficult.
Too bad.
View detail
Do-it-yourself HelmetFitting adjustment
I tried to adjust the fittings based on Niigata 2 Rinkan's April 9 blog, as I had renewed the interior.
I added Sponge because there is a gap in the front and back and top and bottom when I put it on.
The tape on the sponge is very strong, so it is better to check the fitting before attaching the sponge.
View detail
To Tandem with my 6 year old son
I bought this for a tandem with my 6 year old son, and I was disappointed that the design and texture was cheap, like a construction site vest, but it is practical enough. The design and texture is cheap and looks like a construction vest. I bought this product because I thought it would be better to have a simple support belt so that I would not have to worry about using it on a daily basis. The only drawbacks are that the driver's body belt is too high on the chest and the buckle is under the armpit, making it difficult to put on and take off. View detail
If you need 5mm thicker, you should buy a new Helmet …
I purchased both the 3mm/5mm thickness sold by the company As a result, I used the 3mm thickness, which is sufficient for One sizeOver adjustments, and the 5 i think that Cheek Pad part is too large if you need a thickness of 0.5mm View detail
You can't go wrong
I used it on my Jet helmet which I was unhappy with fitting I am very happy with the fit and there is no gapping after installation It's just one coin and it's my favorite helmet View detail
Speed Pit Sponge
Very good packaging and the sponge thickness is 3mm. Very easy to use just cut and stick. i adjust my helmet sponge using this product and it does fit my head exactly what i want after completed the adjustment. View detail
Stylish
I installed it on a Silver body! It's a unity
I like the Black Rail part of it, it's subtly Accent!
The Aluminum Grip is very high quality and this product is very easy to install and remove It was!
If it were a little cheaper, it would be great!
View detail
It looks nice.
It was a bit difficult to install, but I love the look and feel of unity and luxury!
The Grip width is also much thicker
The look is one of my favorite things I've tried out of all the things I've tried!
View detail