Reviews
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
It looks better now.
I put it on because it stands out from the OEM. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: KAWASAKI 650RS, KAWASAKI 650-W1, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 250SS, KAWASAKI 350SS, KAWASAKI 400SS, KAWASAKI 400SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 500SS, KAWASAKI 750SS, KAWASAKI 750SS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z2, KAWASAKI Z1, KAWASAKI KH250
We can only be thankful that we have Parts….
It functions as a Blinker Bracket.
The shape is completely different from that of the OEMBracket.
That's the fate of Ripro products, we should be thankful that Parts is sold.
We do not recommend this product for the finicky or nervous person.
View detail
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 Police, KAWASAKI KZ1000 ST, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000, KAWASAKI KZ1000 MK II, KAWASAKI KZ250, KAWASAKI KZ400, KAWASAKI KZ440, KAWASAKI KZ550, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ650, KAWASAKI KZ750, KAWASAKI KZ750
Maintenance
I replaced the Front Brake Pads on my Z1R with Vesra's. The pads no longer squeal and I can break without worry. I don't know about the durability yet. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: KAWASAKI BALIUS [BALIUS] I B1-B4, KAWASAKI BALIUS [BALIUS] I B1, KAWASAKI BALIUS I B4, KAWASAKI BALIUS [BARIOS] II B1-B4, KAWASAKI BALIUS [BALIUS] II B1, KAWASAKI EL250 E1-E2, KAWASAKI BALIUS [BARIOS] II B4, KAWASAKI EL250 E1, KAWASAKI EL250 E2, KAWASAKI ELIMINATOR 125 [ELIMINATOR] A1-A2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2-B3, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B3, KAWASAKI ER500 A1, KAWASAKI ER500 A1-A3, KAWASAKI ER500 E1-E3, KAWASAKI ER500 A3, KAWASAKI ER500 E1, KAWASAKI ER500 E3, KAWASAKI ESTRELLA [Estrella] B
Mounted on ZZr250
Mounted on ZZr250
SelfStir was a tough car model,
After replacing it with this one, that has been alleviated.
I guess it is a standard Custom for ZZr250.
View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
long vowel mark (usually only used in katakana) (>ω<;)
Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.
Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!
However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
Great!
Replaced an OEM Master Cylinder with a BALIUSA5 that developed an air leak.
The color is Black×Black.
I was relieved to find that the front brake, which does not bite the air, was properly connected to the Snap. (? ・ ・?)
The only problem I have with this vehicle is ….
The tank is placed too close to the HandlebarCenter and may be covered by the Tachometer.
Well, I can just buy a Bracket at Home center and move it to a new location, lol.
I have a shabby blog, if you are interested! (^_^;)
https://enjoy-motorcycle.blog.jp/
View detail
Quickly!
We arrived today and for the time being, we exchanged ?Head Gasket of the middle Cylinder that is missing Gas.
Currently, there are no problems, but we will watch the durability in the future.
View detail
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI KH500
I am concerned about the Gold genus sound, but ….
It has been a month since they were installed and they are performing well.
We have made it a mixed Spec. so there is less White smoke.
I am wondering if there is a pin hole for removing oil?
If anyone knows, we would appreciate it if you could let us know.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 500SS MACHIII (H1), KAWASAKI 750SS MACHIV (H2), KAWASAKI 750SS MACHIV (H2), KAWASAKI 750SS MACHIV (H2), KAWASAKI H2, KAWASAKI KH500
I was surprised at the high precision of the parts.
Repeated disassembly and adjustment of the Carburetor did not improve it.
I was wondering if Float was suspicious of the expensive OEM Product or the DOREMI COLLECTION, which I have always been a fan of, but I chose this one and Large was right.
Adjustment "height" not just ... (but also ..) Liquid level I checked with both and was surprised to see that they matched perfectly.
View detail
Fits: KAWASAKI KH500, KAWASAKI 750SS, KAWASAKI 250TX, KAWASAKI 350A7, KAWASAKI 500SS, KAWASAKI 500SS MACH III, KAWASAKI 750H2, KAWASAKI 250SS, HONDA MTX50
iridium (Ir)
Engine engagement was improved and the jerkiness during acceleration disappeared.
Carbon adhesion by the plug disappeared, and the combustion effect seems to have increased.
However, the effect is not that great as if the acceleration is better and faster.
If the fire caused by Carbon adhesion goes away, I would like to continue next time.
View detail
Fits: KAWASAKI 500SS MACHIII (H1), KAWASAKI KH500
I think it is a Cospa Large product.
The Engine is not in perfect condition yet, but the sound quality and volume are not bad.
If anything, it would be nice to have identification for each Cylinder. In alignment. [Color] Clear paint was damaged.
I will post again when it is completely finished.
View detail