Reviews
Length and Working Space
We needed to change the Bolt that holds the Exhaust System in place, so we went with this one.
I would have been happy with one, but it's not perishable, so I'll keep it in the Screw box in case I use it someday.
View detail
Large Satisfied
[OEM] When we tried to install the for SportsterFrontEngine Chrome Mounting Bracket, the supplied Bolt (1.25-inches) was too long and the Bolt did not fit between the Frame and EngineBody in one place. So we decided to use this 1-inch Bolt (the OEM Bolt is also 1-inch) and installed it. It was very helpful. View detail
Weighty.
The product is quite heavy, strong and cosy. View detail
Ideal for fixed Bolt of Generator in TZr50R
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This item is a stainless cap bolt of M5×16mm pich0.8.
The GeneratorBolt of the TZr50R is secured with a + nabe Screw, but it is quite easy to lick.
We decided to replace it with this product.
How was your experience with it?
I used a stainless cap bolt because it is a fixed bolt for the Generator, so I thought it didn't need to be that strong.
No problems at present. We will continue to use it as is.
How did it compare to other products?
I would prefer to replace the OEM Nave Screw with Cap bolt as much as possible as it is surprisingly easy to lick.
[Points to note]
Stainless SteelMaterial, so care should be taken not to apply too much force.
View detail
I made a mistake in the size and couldn't use it, but I'm making it Stock.
[How is it used?
Generator fixed bolt from Nabe Screw during EngineO/H of YAMAHA/TZr50R.
I bought this one with the intention of replacing it.
The result was not usable because of the wrong Size, but we are using it as a Stock for something else.
How was your experience with it?
I think the quality is good enough.
How did it compare to other products?
I don't have anything to compare it to, but I wonder if the price is higher than Home centeretc.
There are many types of this kind of products, so it is easier to find them on Net.
[Points to note]
nothing special
View detail
Expensive but good product.
I bought it for a place where I really want to fix Wiring.
It's Titanium, so it's expensive, but I'm satisfied.
View detail
Inexpensive but effective parts
The fastening Bolt of BMWOEMBrake Caliper was rusting, so I replaced it with Titaniumium Bolt from Rise Corporation during Overhaul.
A certain Oak Auction has a Bolt made of SUS304 Stainless Steel for Caliper fastening, but considering the fracture strength of the material, I think it is very dangerous and has a high possibility of breakage.
This Titaniumium bolt should have no problem in terms of strength, and the screw threads are beautifully machined.
View detail
On the side cover.
I chose this one because the Bolt on the Side cover of WR250X was missing.
The color is beautiful and the installation is flawless.
View detail
Made of Stainless steel, you can use it without worrying about Rust!
[How is it used?
By replacing the Front Fender, the Steel Bolt was replaced with a durable Stainless Bolt.
Was the one you received as per Image?
The quality was as high as the Image.
Was the installation difficult?
Bolt replacement for easy installation.
How was your experience with it?
It will be used for a long time without worrying about Rust.
The Button bolt looks more expensive than the Cap bolt.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity:It would be even better if there is a Package that comes together as a Set product.
View detail
For mounting bolt on Generator cover
I bought it for mounting bolt of Generator cover of CUB series Engine.
The bolt under the Left is the same length, but the main reason I purchased this bolt is because the OEM bolt here is stuck in the back, so it is difficult to insert the tool.
View detail
![[Repair Parts] Socket Set Screw](https://img.webike-cdn.net/catalogue/images/107206/00-00-0510_TS.jpg)
The pack of 6 replacement socket set screws sure come in handy
About quality and texture - The socket set screw from SP Takegawa is made from stainless steel and is sized at M3 x 4mm while the quality from the overall fit and finish is perfect. About the feeling of use - The socket set screw is used on the drain bolt with magnet and does a wonderful job of securing the stick temperature sensor but being so tiny are easily lost so the pack of 6 replacement socket set screws sure come in handy. Products to buy together - The socket set screw are a key part to work together with the drain bolt with magnet as is the sealing washer which are a product worth buy also. Difficulty of installation - The installation of the socket set screw is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the socket set screw into drain bolt with magnet. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the socket set screw is no different. Having the pack contain a quantity of 6 socket set screws helps achieves this. About shipping and packaging - With there being no cost difference between sea freight and EMS for the socket set screw, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Titanium Swamp.
[How is it used?
Around the Steering
Was the installation difficult?
Using Anti-seeds.
How was your experience with it?
Lightness is bought with Gold.
View detail
Titanium!
I bought this for a front caliper for my VSTROM250SX.
M8 P=1.25 M8×35mm XQuantity:2pc (Universal:ZT03-0835)
I can see it, but it's invisible and fashionable (laughs).
I used them quite a bit for SEROW before, so they are reliable and safe.
It is a good product with a high degree of self-satisfaction.
View detail
White has 200 colors.
I was looking for an Aluminum Bolt to install parts for CRF250RALLY.
The reason for the gold color is that the outer tube near the installation site is gold color, so I wanted to make it look similar to the gold color. 。
I checked the items received. The number and Size are the same as described. The Pitch is 1.00, which was not stated, and the length of the Pitch is 45mm. The color is relatively dark Orange Gold, similar to Thailand Gold.
Previously, Color:I once imported an AluminumBolt set that was clearly marked GOLD. I was surprised to find several different colored Bolts mixed in with the Bolts I received. I am glad that this time JP MotoMart delivered all of them in the same color! 。
Various Gold color names are used in Southeast Asia. In Japan, all gold-based colors are often referred to as "gold" except in the case of color specialists. If you are looking for Anodized products in the same color family, please refer to the photos in this page for more information. 。
This product is fine as a Bolt. The process of making one-off parts is fun. It is also a fun process to purchase and select various Bolts.
View detail
Lightness is bought by Gold.
Best in cost performance? View detail
It's good.
It is available at most motorcycle supply stores.
Parts replacement, etc.
I replace them when the dimensions change, etc.
View detail
Super trap Diffuser Disc
I have been using it for a long time to stop Super trap Diffuser and it is cheaper than OEM Product and no Rust and Large change is helpful. View detail
Cap bolt with high universality.
[How is it used?
When I got my 25 year old PAT225WE, I bought it as a replacement for an OEM bolt (some of them I didn't know where they came from) that had been licked and tired at the corners after maintenance and restoration.
Unlike the steel BlackCap bolt sold at the local home centerretc., the Material:Stainless steel makes it easy to use for fixing the exterior and switches, etc., as it is resistant to rust, and is useful in various places.
Was the one you received as per Image?
As I mentioned above, it is a relatively MAJOR design bolt that can be purchased at home centers nowadays, and it is just like the Image product.
Was the installation difficult?
This is a type of bolt that is detached and attached using a Hexagonal Wrench.
If you have the dedicated tools, it is not difficult to remove and install the bolt, as the removal method is the same as that of the Others bolt.
I think it is becoming the next most popular after the normal convex hex Head Bolt!
How was your experience with it?
Although it is a bolt that is relatively easy to pick at, the stainless steel material makes it harder to lick than a steel cap bolt, and the black color makes it less noticeable when fixing switches and plastic parts, making it a very easy product to use.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
2 Bolts on Package Quantity:The product is sold in each length as a Set.
[Was there anything that disappointed you?
Basically, no.
At one time there was a lot of fuss about corrosion and gnawing depending on the type and characteristics of the Gold genus, but I'm an amateur and don't know much about it.
Other items that would be helpful
Point and hang of installation
It is a convenient bolt that can be used alone or in combination with the FUJI crucible type aluminum spacer.
[Notes]
As with any Bolt, please insert the appropriate tool firmly and deeply into the bolt before attaching or detaching it.
Failure to follow the above will lead to unexpected trouble, such as licking the bolt.
[ITEMS TO BUY TOGETHER
This is a Bolt only product (pack of 2), so if you want to use it where a Nut, Spring washer or Spacer is required, please purchase the necessary items separately.
[Opinions and requests to Manufacturer
Thank you very much for the lineup of various lengths. If you could reduce the price a little more, it would make it easier to purchase large quantities.
View detail
Fits: Others
Highly universal design like a certain manufacturer's OEMBolt
[How is it used?
I purchased the DRC Aluminum Spacer for M6 to go along with the SEROW225WE as a Bolt to match when used to secure the exterior of the SEROW225WE.
The following items are "DRCAluminum spacer and Quantity:The "State used in Set" will be in Review.
Was the one you received as per Image?
As the title suggests, it is a bolt with a Flange that can be turned with an 8mm size Socket or Wrench, I believe that this Flange makes the Large size fit the recess of the Aluminum spacer perfectly, which leads to the sense of unity when the exterior is fixed.
The product was as per the Image.
Was the installation difficult?
The method of use is no different from that of a regular bolt.
How was your experience with it?
I tried to match several different Bolts in combination with Spacer's Spacer made by DRC. Design without being too assertive." Several lengths are relatively easy to come by." Cost per unit performance." I have been using this Bolt in my Spacer vehicle since then.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
Quantity of 2 Bolts in a Package made of Vinyl:The product is sold in each length as a Set.
[Was there anything that disappointed you?
It is Uniqlo plating, so Rust may occur in some environments, but considering the mature design and cost performance, it is a sufficient product and I have no complaints.
Other items that would be helpful
Point and hang of installation
The aluminum spacer is changed to match the coloring of the location where the bolt is used, and the bolt length is the same as that of the OEMBolt.
[Notes]
Since the head part is 8mm in size, if the proper tool is not used, the corner will be licked and it will not be able to be tightened at the specified torque, and rust will easily occur.
Any Bolt should be carefully tightened or loosened using the proper Size tool.
[ITEMS TO BUY TOGETHER
Naturally, it can also be used with Single Body.
However, I think it will look even better when combined with an aluminum collar, as I did this time.
[Opinions and requests to Manufacturer
Thank you for the lineup of various lengths.:I would appreciate it if you could sell Stainless Steel products.
View detail
Fits: HONDA CRF150R, HONDA CRF250L, HONDA CRF250M, SUZUKI RM85, SUZUKI RM85, HONDA CRF150R, HONDA CR85 R2 03-07, HONDA CR85 R 03-07
With big rotor
In parallel with the big rotor conversion, each part was replaced with a Titaniumium bolt.
The lightness and brilliance of the product are not only different, but also the level of satisfaction is different.
It is pricey, but I think it is worth replacing.
View detail