Reviews
This is the first time I bought a Black aluminum taper bolt, and it's good.
[How is it used?
Used for Demon150GR Cowl and License Plate Bolt.
Was the one you received as per Image?
This is the first time I have purchased a black aluminum taper bolt, but it is a deep black without fading etc. This is a good parenthesis.
I usually tend to choose Gold alumite, but Black is also quite austere.
Was the installation difficult?
It is an easy Custom to change.
Just measure the length of Bolt and buy the same length!
I DRCAluminum spacer because the company DRC Spacer, but ExactlyFit [Type01] We are using the following together.
How was your experience with it?
Anodized in Black, quite nice.
At a quick glance, it looks OEM-like, but it is a bit of Customization that those who understand it can understand.
Aluminum, so it's slightly lighter!
[Included Parts:were they on?
Only the product is in the Blister pack.
No Instruction Manual.
[Was there anything that disappointed you?
I have been a huge fan of this Series, and I will not be disappointed.
I think the cospa is good and there is a good variety of Sizes to choose from.
I hope DRC will release something other than M6Size!
View detail
Material:Stainless Steel, high quality, high precision!
[How is it used?
I bought it as a base for installing a reflector, although it was originally intended to be used as a base for GUYRA Shieldetc.
Was the one you received as per Image?
High quality and high precision than Image, Cut-out or Large size, solidly made, durability is also Material:It is Stainless Steel, so you can expect it. I think it's a great part.
Was the installation difficult?
The headlight mounting bolts are simply replaced with the NORMAL Headlight Mounting Bolt.
I am installing M6 Bolt to mount the reflector. Originally, the CB1100-specific Bolt (Top 15mm, Screw 25mm) may be preferable, but in order to avoid the reflector from floating, I chose this Short Type with Top 10mm, so I cut the bolt on the reflector side and use it. In case of CB1100 specific Bolt, I think it is possible to install without cutting the Bolt on the reflector side.
How was your experience with it?
Accuracy is high and very secure.
Similarly Bolt by BRC looks long and more expensive than anything else, so we recommend this product.
[Included Parts:were they on?
I purchased two bottles, and they even came with a careful Instruction Manual and Sticker.
[Was there anything that disappointed you?
Not at all. I think it is a courteous Manufacturer and the product is Large satisfactory.
▼This is not the original use, but it is very nice to be able to buy them as Repair Parts.
View detail
Just this one thing changes the impression.
The product is exactly what everyone thinks it is.
Just a little bit of color changes the impression.
View detail
Black
I purchased this product to unify the fixed parts in Black.
The rust-resistant stainless steel and black color are inconspicuous, and the color unifies the product and gives it a nice look.
View detail
Stainless black
I bought this stainless black to replace the stainless bolt fixing screw, because the silver bolt stands out and the balance of the color is not good.
It matches the rest of the Black and is less noticeable, so I am happy with it.
View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
Titaniumium Bolt is self-contained
Replaced the PALSA Ring fixing bolt around the brake with a Titaniumium bolt. The appearance of the bike is more than the performance improvement, and it is a world of complete self-satisfaction. But this is also custom. View detail
Exactly
I used this screw around the meter on my gsr. 1pc. rolled off and I lost it, so I used a different screw, but I ordered it from OEMParts. I knew that proper OEMParts is the best! The picture showed Silver and Black, but the Black one came. View detail
Stainless Steel
Change to Stainless capFixing Screw to prevent rusting.
There are no varieties or sizes nearby, and this place has a wide variety of products.
View detail
I feel good
I think it is the best cospa.
I think this Titaniumium Bolt is inexpensive at this price.
View detail
Number theft prevention
A regular Hexagon Bolt would be fine.
Replaced with Torque, which may help a little with theft prevention anyway.
View detail
For CaliperMount
The Bolt that came with Caliper support was
Replaced with a regular cap bolt because of the way it looks.
They wanted to look good with Titanium anyway.
Maybe it would have been better if it wasn't perforated.
View detail
Depending on how many you have, you may be able to buy them at the homestead?
5mm×16mm tapping screw
Screws to fasten the lid of the air cleaner
If you know the length, maybe Homesense is cheaper?
This is for people who do maintenance and should have a spare.
View detail
craftsmanship
In the attached photo, the Caliper side is Bolzen's Titaniumium Bolt and the OuterCase side is a Titaniumium Bolt of the same standard made by another company.
The Bolt made by Bolzen is terribly elaborate in every detail, such as the screw head and the core of the shaft.
It is twice the price range of other companies' Bolts produced overseas, but it is more than worth it.
If anyone is comparing Bolt with other companies, I would definitely recommend Bolzen.
The Caliper Mount Bolt for the Sumitomo OEM brembo is M10 P1.25. For your reference ….
View detail
Mounted on Exhaust Bracket
It's a ZETA and it's definitely accurate and easy to use! View detail
No imprint on the head.
Thanks to its accuracy, it clings to the Snap.
Too bad there is no imprint on the head.
Grease was applied to the surface because it was used as a cover for the oil filter.
View detail
Used for Oil filter
It is unfortunate that there is no engraving on the head of the Bolt, but the difference from other Bolts is Fashion View detail
No complaints except CenterGap.
I used it on the Handlebar Clamp of my Bonsai Motorcycle. The part where the Hexagonal Wrench is inserted is gapped from the center, but there is no rattle at all, so it can be tightened firmly with Torque. I think it is a good cost performance to replace the rusted bolt as it gets rusty. View detail
Cheaper than Homesense
I can't believe the price for a pack of 5. Is there a profit to be made? I bought these bolts because the iron bolts on my car were rusting and I wanted to replace them. I bought these bolts because the iron bolts on my car were rusting, and with this quality, I would be happy to replace all the iron bolts on my car. View detail
footpegBolt for Replacement
I have converted to Rear Sets for OEM diversion, but the NORMAL screws were not long enough, so I bought them for replacement.
Posh Screw is written with the proper strength, so I was able to use it with confidence. I have not had any problems so far, even though it is a weight-bearing part.
View detail