Reviews
I think that a price and appearance are very good. I think that it is goods in which appearance and color serious satisfaction go as a price with the sufficient degree for stopping accessories although use of the high load for the starting place canno
I think that a price and appearance are very good.
I think that it is goods in which appearance and color serious satisfaction go as a price with the sufficient degree for stopping accessories although use of the high load for the starting place cannot be performed like titanium or a stainless.
View detail
It may be better to use in neither the part which needs high torque, nor the part which need reinforcement, since wall thickness is thin. However, since he is smart more than it considered, I think that it is good for a little accent. Moreover, it
It may be better to use in neither the part which needs high torque, nor the part which need reinforcement, since wall thickness is thin.
However, since he is smart more than it considered, I think that it is good for a little accent.
Moreover, it obtains immediately as convenience parts, and since other manufacturer aluminum, titanium, and a difference are cheap, it is saved.
View detail
if such a bolt is used -- -- the Lord -- don't do!!! -- it may be considered so!!! the torx bolt of a plate screw -- type with a pin. Since a plate screw is a bolt head of a reverse cone, there may be little frequency in use. . . However
if such a bolt is used -- -- the Lord -- don't do!!! -- it may be considered so!!! the torx bolt of a plate screw -- type with a pin.
Since a plate screw is a bolt head of a reverse cone, there may be little frequency in use.
.
.
However, if a !!! rosette washer etc. are used, the same user-friendliness as a general bolt will become possible.
The bolt which flattened the lug of a bolt head to the limit rather than them even if what kind of bolt and it were super-universal head cap bolts.
It is a plate screw.
The act of using a plate screw will also be able to be said to be the customization which makes aerodynamics an ally if it says strictly.
In fact, the unevenness exposed on the surface of a motorcycle has many bolt heads, if those unevenness is smoothed to a limit, will also become construction of aerodynamics naturally and will also become improvement in the aerodynamics engine performance.
The plate screw which can be regarded also as the most heterogeneous in a plentiful bolt.
There are few the advantages and benefits of a plate screw.
in fact, thinking so mistakes, it comes out, and occurs, and the original role of a plate screw is the embodiment of the surface of concavo-convex zero.
It is uneven very small and flattens the surface smoothly as much as possible.
Smooth technology.
If a plate screw is gained, we will be reminded of this language always.
Construction of aerodynamics.
This is splendid customization and I think that it is the customization which cannot disregard existence of a bolt.
Pursuit of the thorough aerodynamics engine performance may be completed using a plate screw.
View detail
The bolt of the belt cover was exchanged. A number is 13. It is fairly light, if 13 iron bolts and 13 aluminum bolts are compared with the bolt of 6x35 although it is small. Although the purpose was not a weight saving but a dress-up up, it is
The bolt of the belt cover was exchanged.
A number is 13.
It is fairly light, if 13 iron bolts and 13 aluminum bolts are compared with the bolt of 6x35 although it is small.
Although the purpose was not a weight saving but a dress-up up, it is considerably conspicuous and is touch are preeminent for an effect.
View detail
As for the size of the front fork bottom bolt of W650, M8x35 is two. It is a cap bolt and M8x35 is two. This is a stock state of W650. The raw material was changed into the titanium alloy for this iron bolt. Whichever it chooses [ of anodi
As for the size of the front fork bottom bolt of W650, M8x35 is two.
It is a cap bolt and M8x35 is two.
This is a stock state of W650.
The raw material was changed into the titanium alloy for this iron bolt.
Whichever it chooses [ of anodizing or a standard (base finishing) ] by a user's hobbies and diversions, the cheapest product is a product made from beta titanium with the bolt of the titanium alloy material of this size.
Although the conversion situation was detailed in the picture, at the same time as it was able to obtain quite looks, the fun ride was also obtained by the ability to have obtained rigidity and elasticity.
Although the power of the axle shaft made from a titanium alloy did not know, possibly it was approached slightly.
.
.
In the case of W650, it is conversion of two mere bolts, but this is remarkable power.
.
.
When stress is added to the fronts at the time of braking and revolution, etc., road surface information mention feels it direct.
Result.
The characteristics of being easy to perceive turbulence of an action will induce linear riding, raising the straight line stability of W650.
The first purpose of the bolt conversion to this part is improvement in a safety margin.
There are metrization and improvement in appearance as the secondary element.
Honesty.
.
.
The conversion to the titanium-alloy bolt of the bottom bolt of a front fork is effective TSU!! In the case of W650, it completes by bolt conversion of two cap bolts of leaving M8x35.
the conversion to only two titanium-alloy bolts opens the door to a fun ride!! HONTOTSU!! it is uncanny -- ~!! Firm maintenance is supported and a front axle shaft,
Though the turbulence of the power of the stress added at the time of braking and revolution is controlled, disturbance is missed with the elasticity which obtained the spring element.
The above engine performance is titanium alloying of a bottom bolt.
For the time being, it is conversion of the bolt made from a titanium alloy of M8x35.
TSU these two bolts are effective truly!! Rather than saying that it is remarkable.
.
.
TSU which is recommendation in a solidly!!! Postscript.
If appearance further wants to improve and it will pad using the product made from a kitaco, and M8 spacer (M8 and outside-diameter phi13 mm-H=5mm), it is certain that the bolt with which anodizing was performed is conspicuous!! Please choose M8x40 (TISC-08040-B) for a bolt in that case.
View detail
It is blue although it is used for a bicycle! It is glamorous! Accuracy is uncanny more than it!! The bolt settled finely is pleasant ^o^.
It is blue although it is used for a bicycle! It is glamorous! Accuracy is uncanny more than it!! The bolt settled finely is pleasant ^o^. View detail
[M8x28mm P1.25] is used for concluding a front fork and caliper support. [M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad. In using it around a brake, 6 hole wiring
[M8x28mm P1.25] is used for concluding a front fork and caliper support.
[M10x25mm P1.25] is caliper support and a product made from brembo. It is used for concluding 65 mm of casting caliper pitch 4 pad.
In using it around a brake, 6 hole wiring hole processing (per one 945 (including tax)) was performed by the addition so that it might loosen and could stop and do in a wire lock.
Meat omission by the side of head circles is a hexagon socket, a hexagon wrench can also work now, the choice of a tool can spread, and the compact flange hexagon head bolt made from beta Titanium can raise working efficiency now depending on a place.
Processing accuracy is high and chamfering is performed also to the quite fine portion, and most cutting traces cannot be seen but it has become a very beautiful result.
The charge of a tool is also dramatically good and can apply torque firmly.
Since it is a product made from a titanium alloy, of course, it is dramatically lightweight, and it is that weight [ like ] which is like a product made from a plastic sensuously.
Ti-6A.I. Artificial Intelligence-4V of an alpha-beta alloy is adopted as a titanium raw material, and reinforcement, ductility, and toughness are high.
Since the drill hole for wire-locking also used the securing bolt of a caliper and caliper support as the bolt head with the type which has been opened in the whole surface (six holes), the wire lock of the slack stop was given, respectively.
Since metal cutting is performed one by one after pressing a raw material, the titanium bolt is carrying out very sharp and beautiful modeling, and fills a feeling of possession.
Since the reinforcement of a bolt is high, the fastening rigidity of each part also improves, and it becomes a weight saving although it is tens of g.
Since it excels also in corrosion resistance, a point strong against the dirt by many years past also serves as merit.
Only one point.
A dramatically expensive thing is a demerit.
View detail
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!! To it being convenient, M10x40 (pitch 1.25) is two!! We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.
View detail
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two. Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm. We are treating the straight cap bolt made from beta titanium (anodizing) now. .
As for the pure pinch bolt of W650, M10x25 (pitch 1.25) is two.
Since a pure pinch bolt turns into a cap bolt, the outside diameter of a bolt head is phi16mm.
We are treating the straight cap bolt made from beta titanium (anodizing) now.
.
.
.
In rare cases.
.
.
To a change of air.
.
.
Transformation of the pinch bolt is enjoyed.
.
.
The flange outside diameter of a bolt head is phi16mm like [ the compact flange hexagon head bolt made from beta titanium ] a cap bolt.
The hexagon-head opposite side is 12 mm.
Furthermore, the design of the two-step style which can also use an 8-mm hex wrench for the hollow of a bolt head becomes a delightful bolt.
Although the product here is a bolt of the design which becomes a two-step style of an inner hexagon head and an outside hexagon head, when using it as a pinch bolt of W650, it will be concluded using an inner hexagon head rather than conclusion using 12 mm of opposite sides of an outside hexagon head.
In that case, the hex wrench which is not in the best pole ball is needed.
The best hex wrench which can be purchased in Webike becomes a hezagonal wrench stick of made in Mytho Roy, the product made from PB, or the product made from TONE.
Furthermore, if it says, L shape hezagonal wrench stick with a ball point will become the optimal.
To the sentence end.
.
.
Decoration parts with larger impact of the improvement in appearance than a function!! Although it may be considered so,
As a matter of fact, road surface flattery nature and dumping become a linear by concluding cfc TOSASU firmly, and a degree of comfort, handling, and breaking are also parts which change to a direct impression.
although KATACHI of a bolt and the manufacturer of a bolt are an individual's liking -- conversion of a pinch bolt -- honesty -- it is effective -- ~.
View detail
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt. (1): M10x65 made from a tachyon. (2): M10x70+ made from bright logic Duralumin washer made
The bolt selection at the time of attaching the stand hook slider of an antlion was dramatically pleasant, and equipped with a total of three Brando's bolt.
(1): M10x65 made from a tachyon.
(2): M10x70+ made from bright logic Duralumin washer made from a tachyon (phi22mm).
(3): M10x70+ made from beta titanium Titanium washer made from a tachyon (phi22mm).
It is because I was pleasant for the reason for having tried many things to have had a difference of appearance in each in the bolt of a stand hook slider.
[Appearance of (3) may be the smartest after all.
.
.
As a place which attaches a stand hook slider to]W650, the place which we chose is a mount portion of rear suspension.
There are three advantages which treat the parts here.
chain - Chain cover - driven sprocket - Swing arm - Rear suspension etc. -- it is because a role of a protector (bumper) can be expected!! And,
There is also an auxiliary role of the step of a tandem rider and, moreover, there is also a role of the improvement in appearance!! However, equip with the stand hook slider made from an antlion (M10), and by bolt exchange of that,
Since honesty and surprised !! place are a place and a place where stress is added also functionally, that the atmosphere of appearance changes so far thinks that a titanium-alloy bolt is suitable!! Although the product name here is a radial caliper mount bolt,
Such usage also told a certain thing and performed the preparations brush.
How is Appearance of this picture??? I think that it is collected quite smartly.
.
.
Honesty and this customization are TSU which is self-praise!! If one was taken out to W650 and it has equipped with the muffler, on the motorcycle of the set muffler of rear one and 2 Sas,
TSU which is recommendation parts at the highest!! it is -- hello ~ and cool ~!! the suitable good at which it can look without getting bored -- that may be such customization -- ~!!
View detail
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650. (1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-1005
It was used for the center stand stopper conclusion attached to the muffler made from a nojima for W650.
(1): About Center Stand Stopper, it is Polishing at Stain Magic made from Yoshimura!! (2) : Compact Flange Bolt made from Beta Titanium (TIHC-10055-B),
Conversion through the aluminum spacer made from a kitaco (M10 and phi16 mm-H=3mm)!! (3) : When pure, the nut for center stands is concluded with the lock nut.
We applied the screw lock agent and did conclusion by the compact flange nut made from beta titanium.
I say why the bolt of M10x55 was replaced through the aluminum spacer made from a kitaco to the center stand stopper attached to the full exhaust for W650 made from a nojima.
It is for making flush (TSURAICHI) the bearing surface which a bolt and a center stand stopper touch.
Since the bolt bottom did not touch a center stand stopper uniformly even if it inserts M10 v in a direct, the aluminum spacer was used as a washer.
Therefore, bolt length was made longer 5 mm than the thing attached to a nojima muffler.
For details, I think whether it can judge by a picture.
Equalization of sidewall is a promise of bolt conclusion.
A normal function is not obtained, either, if a bolt and a nut do not obtain a flat-surface bearing surface by Kami who ties a certain individual.
The individual which equalization of the bearing surface has not accomplished requires a spacer or a washer.
If language is added to a picture.
.
.
The flange outside diameter of a titanium bolt is 16 mm.
The outside diameter of an aluminum spacer is 16 mm.
The outside diameter of a titanium flange nut is 16 mm.
With the above-mentioned parts, normal conclusion of the center stand stopper made from a nojima is attained.
All the intentions are the performance more than satisfactory!! Webike was got to know and the possibility of customization increased.
I borrow this place and am thankful to Webike.
Thank you Webike!!
View detail
It attached to the trial vehicle and the trail vehicle. It is satisfied with firm structure.
It attached to the trial vehicle and the trail vehicle.
It is satisfied with firm structure.
View detail
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of dista
Although the back step was attached at first, a position changes, and since a change pedal is normal when the angle of an ankle is tight when touring etc. are prolonged operation, and it is a multi-step of a daytona, and it changed into the state of distance being made and being hard to change, it purchases.
Unlike with the rubber of normal, the straddle to steps, such as a corner, is also effective, and also it is begun to also delete appearance, comes out of it, and is good touch.
It is recommended at those who do not want to change a position.
View detail
Mr. Webike is abundant in handling of a bolt, and he is good to obtain a size brand needed freely. Since it is [ a shopping basket ] nonperishable, it is dramatically useful to those who come when, and buy and do. Then, the titanium bolt here.
Mr. Webike is abundant in handling of a bolt, and he is good to obtain a size brand needed freely.
Since it is [ a shopping basket ] nonperishable, it is dramatically useful to those who come when, and buy and do.
Then, the titanium bolt here.
He wanted to try Mr. Beta titanium's anodizing, and it purchased.
Texture is dramatically good and can feel Mr. Beta titanium's spirit.
The satisfaction more than a price was able to be acquired.
View detail