Reviews
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF250X, HONDA CRF450X, HONDA CRM250R, HONDA CRM250AR, HONDA XR230, HONDA XR250, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI KLX125, KAWASAKI D Tracker 125, SUZUKI RM125
Titaniumization of the Brake area
Used for bolt fixing of front axle shaft.
Both lightness and brilliance are a world apart from OEM.
View detail
Black and hard.
Black and hard.
I know it's short.
It's not about length.
It's hardness, after all.
Black Dye Bolt is my favorite.
I think I'll buy the Black dye solution.
View detail
For installation of Rear Sets
Apparently, a button cap bolt is good for the Rear Sets attachment point to prevent them from getting caught on the shoes, so I used this one.
It's not easy to find these sizes at home centers, so it's nice to be able to choose the size and type in detail at Pinpoint.
View detail
Good variety of Sizes.
I went to Home center first because it was hard to find this kind of product on webike, but I couldn't find one with the same shape as the OEM one, and the ones I could use were too cumbersome because they required some modification. I went to Home center first, but they had a hard time finding the same shape as the OEM one, and even if they did, it would require some modification, so I gave up. The product is the same shape as the OEM and the size is JUST right! The only thing is that the price is a little bit high. View detail
I can rely on them in times of need!
The Bolt of the Brake Caliper was rusted, so it was Refreshed with KITACOConvenienceParts (M8×40 P1.25).
The Caliper used is a YamahaOEMbrembo.
Since I could not search the OEM Parts List (no parts appeared), I first tried to remove one from Caliper, measured the Bolt size standard with Caliper, and then searched and purchased the Bolt with WeBig.
The torque for installation was measured beforehand with a KTC digital ratchet and was approximately 50 Nm, so it was tightened accordingly.
KITACOConvenienceParts is a great help when you have an itch or need help.
It's just a small part, but I'm glad it's clean!
View detail
Recommended!
Recommended!
Custom feeling goes up!
View detail
It stands out
It's just a Bolt, but it's beautiful and stands out. View detail
casually stylish
Casual Titanium One point
I think it is a good Design.
But the price is high.
View detail
Firmly usable
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
We measured the amount of gap and decided to put aluminum collars on the rear suspension and silencer band side to fix them in place.
How was your experience with it?
The measurements were perfect and firmly fixed.
I have also done a good job of Torque management, so I don't think there will be any problems.
How did it compare to other products?
This time I bought 80mm and 50mm.
Home center also sells Bolt, but basically they don't sell P1.25, so you have to buy it at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
Aluminum is surprisingly soft.
Be careful when working with Overtorque, as it can easily be severed when tightened with Overtorque.
View detail
Self-satisfaction
It is just self-satisfaction.
Still, it is more than enough.
View detail
![PREMIUM ZONE Cap boltCollar [for M8 Bolt].](https://img.webike-cdn.net/catalogue/images/15903/91926_1_TS.jpg)
I like the MATCH feeling with the car body color.
The Multi Bar Holder for GSX-R125 made by DAYTONA has been installed.
The standard cap color was silver, which was a little uncomfortable, but when we replaced it with this product's blue position, it matched the color of the car body and increased the OEM feel.
Although the product does not change its effect in any way just because it is exchanged, we recommend the Large change for those who want to enjoy fashion.
View detail
Titanium Bolt
I am very happy with the new look. It would be better if it didn't fade……. View detail
High-precision Bolt for peace of mind.
CT125 (JA65) The OEM is a flange bolt, but for some reason, Mukawa's Super oil pump is installed with a hex cap bolt. Since there is a specified torque, we purchased this bolt so that we can manage the torque precisely. The high precision of the bolt can be seen at a glance, and it even has a hole machined for a wire lock. Of course, I will not use the wire lock for this purpose (laugh), but I mistakenly read the description of the product and purchased 3 sets, but I will keep the extra Bolts in case I need another Bolt of the same size, and I plan to transfer them to my friend's CT125 friends. When I need another Bolt in a different size, I will get it from this brand. View detail
![PREMIUM ZONE Cap boltCollar [for M8 Bolt].](https://img.webike-cdn.net/catalogue/images/15903/91928_1_TS.jpg)
When you want to make the Bolt area look just a little bit better.
[How is it used? Restore&maintain a vehicle that was purchased used.
I was working on improving the appearance of the Rear Carrier and purchased this product because the bolt used to install the Rear Carrier looked like a commercial bolt and was not very tasty.
Did you receive the item as per the Image?
It was very helpful because it is hard to find a product that is compatible with M8Size Bolt.
It is a product that has nothing to do with performance, but I feel that the humble part that was just fixing the parts to the car body has become a little more glamorous (I guess it's just the person installing it...) It was just like the Image product.
Was it difficult to install?
It is a totally simple process.
Just clamp it between Bolt like Spacer or Washer and tighten it, and it will also serve as a Washer substitute and look better.
It is also good to be able to dress-up casually.
How did you like it?
As I said above. "No performance-enhancing parts." It does not improve power or fuel efficiency, but it does make the surroundings a little more festive, and that is all that is needed.
Was "Included Parts:" attached?
None, Anodized Treated Aluminum Collar is Quantity:2pc. It is a Simple product that contains only a Set.
Were there any disappointments?
The product was as expected, which is sufficient since I bought it for the purpose mentioned above.
Other items that would be helpful
Point and hang of installation
Install an aluminum collar of the color of your choice on the bolt where it does not interfere with driving.
It is up to the rider to decide whether to have one point or all available Bolts in one color, or to install a variety of colors (of course). Not used." Hang depends on the rider's Sense.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, it is just easy to figure out by inserting the cap bolt into the area where it is used, so I don't think there will be any problem.
[Notes]
Since this is an aluminum collar for a cap bolt, if the bolt you want to install is not a cap bolt, you will need to purchase a cap bolt with the same diameter, screw pitch, and length as the original bolt separately.
[ITEMS TO BUY TOGETHER
Cap bolt as described above is required.
As a reminder Home center system Bolt from 8M and up sold at the "Bolt" has a Sugar Crystal Screw Pitch than the one for Motorcycle. Industrial Bolt. If you are planning to get a Bolt from a neighborhood home center, be careful.
[Opinions and requests to Manufacturer
Is there not much demand? Please continue to sell as much as possible.
View detail
The finish is perfect.
I am a bit addicted to Titanium and am gradually replacing Bolt that is starting to corrode on the surface with Titanium.
The low head of the titaniumium cap bolt was very useful because it was hardly available.
I have purchased M6 and M5 cap bolts, and the M6 cap bolt in particular has a 2mm lower head than the regular cap bolt.
A mere 2mm is a mere 2mm, but depending on where it is used, the finished product may vary significantly.
The dimensions are basically the same as OEM, but extra long items are shortened, and for items such as the Master tankBolt that require a reamer section, aluminum tape is wrapped around the reamer to match the diameter.
Titanium is expensive, but considering the fact that it has almost no surface corrosion and is beautiful, I think it's a good choice.
I would like to see a simplification of the package, which includes 1 pc each in a modest package, to reduce the price a little.
View detail
It was cheaper than OEM Parts.
[How is it used?
Purchased as Bolt around Engine of SEROW225W.
Up to 1998 model year of SEROW225WE (4JG6:aka On-bu SEROW), the Bolt used around the Clutch cover and Generator cover is a Plus screw.
I don't care if the head of Bolt is Plus or hexagonal if I just ride it, but I'm afraid of damaging the head part of Screw when I replace the clutch plate, and I like Hexagon Bolt after 5MP for its appearance, so SEROW225 kept in my house is I am afraid of damaging the head part of the Screw plate.
I have been able to use it many times because it is more Reasonable than YamahaOEM's Bolt at such times.
Was the one you received as per Image?
The bolt size is M6 and the head part is 8mm, which is almost the same design as the OEM bolt used for the engine part of SEROW225WE (5MP) and SEROW250, so there is no discomfort at all and the bolt with the same length as the OEM bolt is also available in the lineup, so the bolt size has been changed to Large. It is a product as shown in the image.
Was the installation difficult?
This is only when used as described above.
The bolt on the original PlusHead is carefully removed so as not to damage the bolt, and then replaced with this product, which is the same length as the OEM bolt, and tightened with the Torque. This product is a two birds with one stone solution for me personally, as it will definitely make the bolt less likely to be pinched the next time it is removed, and it also looks better.
How was your experience with it?
I have used Yamaha OEM Bolt in the past, but there seems to be no inferiority to the OMBolt. I have no problem with it, and the price is too low to be thankful.
The number of Bolts in each length is different, but no matter which length Bolt you buy, it is definitely cheaper than OEMB Bolt. (Example:YamahaOEM Product No. 95024-06025Bolt,Flange 1 piece 121 yen×5 pieces = 605 yen, but with DRC, the same size can be purchased for 251 yen for 5 pieces)
[Included Parts:were they on?
None, Bolt only.
[Was there anything that disappointed you?
No problem at all, and since it is a bolt of Steel like YamahaOEM, there is no problem with compatibility with the Case's AluminumMaterial.
Other items that would be helpful
Point and hang of installation
When used, Screw lock agent is applied before tightening.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual because the bolt is exactly as it looks, but in terms of ease of understanding, I think this is a top class easy-to-understand product.
[Notes]
Use properly to avoid twisting off the Head with Overtorque or nipping the Head with improper tightening work.
[ITEMS TO BUY TOGETHER
Nothing in particular, but the product itself is inexpensive, so it is good to buy it together with other products.
[Opinions and requests to Manufacturer
in this vein HondaOEM-like Bolt." Ya SEA BASSOEM-ish." KawasakiOEM-ish." I would appreciate it if each MotorcycleManufacturer-like BoltSeries of etc. is released.
View detail
Titanium
Titanium color is Parenthesis nice and expensive View detail
This is the first time I bought a Black aluminum taper bolt, and it's good.
[How is it used?
Used for Demon150GR Cowl and License Plate Bolt.
Was the one you received as per Image?
This is the first time I have purchased a black aluminum taper bolt, but it is a deep black without fading etc. This is a good parenthesis.
I usually tend to choose Gold alumite, but Black is also quite austere.
Was the installation difficult?
It is an easy Custom to change.
Just measure the length of Bolt and buy the same length!
I DRCAluminum spacer because the company DRC Spacer, but ExactlyFit [Type01] We are using the following together.
How was your experience with it?
Anodized in Black, quite nice.
At a quick glance, it looks OEM-like, but it is a bit of Customization that those who understand it can understand.
Aluminum, so it's slightly lighter!
[Included Parts:were they on?
Only the product is in the Blister pack.
No Instruction Manual.
[Was there anything that disappointed you?
I have been a huge fan of this Series, and I will not be disappointed.
I think the cospa is good and there is a good variety of Sizes to choose from.
I hope DRC will release something other than M6Size!
View detail
Material:Stainless Steel, high quality, high precision!
[How is it used?
I bought it as a base for installing a reflector, although it was originally intended to be used as a base for GUYRA Shieldetc.
Was the one you received as per Image?
High quality and high precision than Image, Cut-out or Large size, solidly made, durability is also Material:It is Stainless Steel, so you can expect it. I think it's a great part.
Was the installation difficult?
The headlight mounting bolts are simply replaced with the NORMAL Headlight Mounting Bolt.
I am installing M6 Bolt to mount the reflector. Originally, the CB1100-specific Bolt (Top 15mm, Screw 25mm) may be preferable, but in order to avoid the reflector from floating, I chose this Short Type with Top 10mm, so I cut the bolt on the reflector side and use it. In case of CB1100 specific Bolt, I think it is possible to install without cutting the Bolt on the reflector side.
How was your experience with it?
Accuracy is high and very secure.
Similarly Bolt by BRC looks long and more expensive than anything else, so we recommend this product.
[Included Parts:were they on?
I purchased two bottles, and they even came with a careful Instruction Manual and Sticker.
[Was there anything that disappointed you?
Not at all. I think it is a courteous Manufacturer and the product is Large satisfactory.
▼This is not the original use, but it is very nice to be able to buy them as Repair Parts.
View detail
![PREMIUM ZONE Cap Bolt Collar [for M8 Bolt]](https://img.webike-cdn.net/catalogue/images/15903/91925_1_TS.jpg)
Just this one thing changes the impression.
The product is exactly what everyone thinks it is.
Just a little bit of color changes the impression.
View detail