Reviews
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
be extremely thorough, focusing on even the finest of details
The mounting hole on the bracket side is an ellipse, so it can be done haphazardly.
In this case, it was used to install MONKEY's Rear Fender.
View detail
LED bulbs installed behind the Number
It is a solid making
Rust will not occur.
The LED bulb is mounted on the Screw behind the Number.
View detail
To DJEBEL.
The rubber of the gasoline cap of DF200 DJEBEL was worn out, so we cut out this rubber in a circle and installed it. View detail
Smaller than expected.
I bought this to put a bar on my φ28.6 Handlebar. The moment I saw it. I thought it was too small, but when I installed it, it was just right! I used the tap as a drill hole. View detail
Beautiful laser cut
I am building a custom vehicle with a Motorcycle called Yamaha's XV750E.
We are in the process of completely rebuilding the seat rail.
We are working with steel welding, but it is very time consuming to start cutting out even the smallest brackets.
Also, since we cut them out by hand, we cannot by any means make "exactly the same thing".
The savior in this situation is the Weld Bracket.
2%er also offers a similar Weld Bracket, but this time I went with GOODS' because I liked the Steel and the dimensions were just right.
We do not have a TIG welding environment, so it is inevitably Steel.
There is a lot of welding with Pipe, but I think the thickness is just right and there is little chance of failure.
Since they are still too thin, they may have holes or be distorted if they are too thin together;
This time, thanks to the WELD system parts by GOODS, we were able to shorten the work time considerably.
I would use it again next time.
View detail
A sturdy (and a little difficult to process) steel Bracket.
I purchased this product to make my own ETC storage Case. If I had to explain in one word Sturdy steel plate Bracket" is
It was harder than I had imagined and difficult to process, but it was tolerable because it is supposed to be durable.
The paint job is also very high quality for the price, and I think it is a good bracket.
View detail
The quality is solid and sturdy.
We started using the system in April 2017 and have been using it for 6.5 years.
I am only a little concerned about retrofitted parts, so I inspect them only occasionally on the side of something.
Obviously, ・・・・ no problem. I will ask them to keep up the good work.
View detail
Used for fixing Carrier and Mounting Base without modification
The CB400SF is equipped with DAYTONA's Multi Wing Carrier, which is used as a bracket to fix the Carrier and the mounting base.
As a result, I am satisfied with the normal use of the product.
However, similar products are sometimes cheaper to buy at Home center.
It's Stainless, so I hope it won't rust (laughs).
View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
You were right to buy it!
I purchased this product to install ETCBody inside Cowl. I was able to install it in my KATANA without any modification. I am very satisfied! View detail
Good Bracket.
I used it to install the ETC Sensor in the Cowl. That's a handy Bracket! View detail
Good
The quality is excellent. It is convenient to collect key switch box and choke cable in one place. And the neck of the motorcycle has been simplified, so it feels much better View detail
Used as Bracket for Reservoir Tank
[How is it used?
Brake masterCylinder was replaced with a RadialPump, which is used as the holding Bracket for the reservoir Tank.
Was the one you received as per Image?
Generally as per Image.
However, detailed dimensions are not disclosed, so be careful when purchasing.
(The arms were shorter than expected.)
Was the installation difficult?
This Clamp itself is the Quantity:It is not so difficult as just tightening the 2pc Bolt.
Instruction Manual is also included, so you should have no trouble installing it.
How was your experience with it?
The handlebar clamp is very thin, which makes me a little nervous, but it is securely fastened. The clamp is so thin that it can be fixed even in a small gap.
The Bolt hole at the end of the arm is penetrating so it can be fastened from either side.
The ability to fine-tune the position is unobtrusively convenient.
[Was there anything that disappointed you?
None in particular.
I thought it would be better to have the DAYTONA engraving in the same color as the Body so that it would not stand out.
View detail
Fits: KAWASAKI KZ1000 Mk-2, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z750 FX
Best product for Utani
It took me about a month and a half to finally receive my order, and I bought it in time to replace my 6V MONKEY/GORILLA Main Harness and multi-system fuse box with a RiproManufacturer multi-system fuse one from a shop that had a bulky wiring kit. (I've compared Update-type Harness, but pmc is the best) I'm not sure if this is a good idea or not, but I'm not sure if it's a good idea. I'm going to Yahoo! I'm not sure what to make of it. If the Engine is the heart, the U-turn is the brain, so I think it's good to have something like this even if it seems expensive. The only thing I'm worried about is whether or not I'll be able to get a Rubber and Band later on, though I'm sure there are many replacements. The only thing I'm worried about is the availability of Rubber and Band. View detail
Repeat products.
I've purchased a variety of Size and have had no problems. View detail
For homemade Parts.
There are some Size that are not in Home center, so it is helpful. View detail
For homemade Parts.
The quality of the product is fine and the various sizes are very helpful. View detail
Various uses.
The quality is good, and it depends on the thing to be installed, but I think that there is no problem also in the strength. It's a must-have for people who make their own products. View detail
DF200 DJEBEL
The tank cap rubber on my DF200 DJEBEL was deteriorating and I was looking for an OEM one, but it was only sold like a set of keys, so I bought this one to try. It was perfect with thin rubber. It was good. View detail
Air filter for agricultural machinery
I use it as an air filter for agricultural machinery without using it for Motorcycle. It is sufficient performance. View detail