Reviews
People who want to be particular about where they can be seen.
I bought a pack of 5.
After Black paint in product description [Color] It says something like Clear Coating, but don't expect too much because you will be sad if you expect too much!
I have not compared them, but I think they are more Black shiny than otherManufacturer
I am very happy with my purchase.
View detail
The Torque is strong and easy to use for the price!
This product is easy to use and has a strong tightening Torque for the price, and it is AllGold, so it is heat resistant, which is a good point! View detail
Relief
The quality is good and safe to use.
It is also rust-resistant and can be used for a long time.
View detail
Is good
The width of the Grip is wide, so it grabs firmly and Clips the Hose.
It is easy to use because it can be removed quickly by grabbing the knob with pliers.
There is no leakage of Fuel line hose and it is safe to use.
View detail
good
The quality is good.
It grips well and there are no leaks.
The tightness was not too tight, but just right.
View detail
Fuel Hose Clip
Clip was replaced along with the replacement of the fuel hose on NSR50.
It works fine
View detail
Maru available in 1pc. units.
I bought this one to replace the hose clip with a firmly stop plate Spring type. I had no hesitation in deciding on this one because the narrower the diameter, the more limited the choices.
The NTB clamp is easier to pick up because the ear part is a little longer than the spring type clamps that are also found in Manufacture OEMs. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
I bought this one to replace the hose clip with a firmly stop plate Spring type. I had no hesitation in deciding on this one because the narrower the diameter, the more limited the choices.
The NTB clamp is easier to pick up because the ear part is a little longer than the spring type clamps that are also found in Manufacture OEMs. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
[How is it used? As hose clip around carburetor
Was the one you received as per Image? Yes
Was the installation difficult? Nothing particularly difficult.
How was your experience with it? Moderately firm and safe to use.
[Included Parts:were they on? No
[Was there anything that disappointed you? As expected
I bought this clamp because I wanted to replace the hose clip with a spring-type clamp that stops only when the clamp is in place. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units.
View detail
Maru available in 1pc. units.
I bought this clamp because I wanted to replace the hose clip with a spring-type clamp that stops only when the clamp is in place. The NTB is easier to pick up because the ear part is a little longer than the OEM. The price is lower than other manufacturers, and I am glad that I can buy it in 1pc. units. View detail
Brake fluid leak stopped.
Used to fix hose between Brembo master and bremboTank.
Previously fixed with Tie Wrap, but Fluid leakage occurred.
I fixed it with this Clamp and the leakage stopped.
View detail
For safety and security
Purchased to stop the Fuel Hose from Carburetor Vehicles.
Since I use this car for racing, it was troublesome to connect and disconnect the hose without clip. I chose this one because I regretted that it would lead to a large accident if it leaked because what I was handling was Gasoline.
The tightening is strong and the Pliers make it easy to remove and install for convenience and peace of mind.
We practice hurry up and get it done.
View detail
Hose clamp。
It's easy to grab and use. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Easy-to-grasp Clamp
It opens effortlessly with my index finger and thumb without the need for Pliers or Radio pliers. I found them very easy to use. The price is also good because it's two for the price of one. View detail
Safe for Hose Tightening
This Hose Band can be tightened on both Oil line and Water line. View detail
Hoose Band for peace of mind
Quantity:1 Set of 10pcs. is good value for money. It is easy to tighten and loosen with just one screwdriver and is durable and resistant to rust. View detail
Variation
I purchased this product to replace the carburetor OH and surrounding hose on my SEA BASSDF200 DJEBEL because it saved me a lot of time and effort compared to picking up OEM parts one by one and I could use the extra parts on my other motorcycle. I'm glad I did because I've used them on other motorcycles. View detail
Choose your size carefully
I was looking for a Hose clip to use for the Hose on my Brake Reservoir tank.
I'm not sure if it's called Size (it's a pain in the ass to measure), so I went on a hunch and bought a φ13mm.
The deciding factor in the purchase
The price was low and the Quantity:1 Set of 2pcs. so I thought it was Exactly for the Hose of the Reserver tank.
The one I'm using now is rusting, so I thought it would be nice to have it painted Black to help prevent any rusting.
[Impressions of using it]
It seems to work fine as a Band. It is a low price but solid.
I was going to use it for the Reservoir Tank Hose on the Rear of my TZr50R, but the upper side is a bit too large, and the lower side is a bit too small... (probably top φ14mm, bottom φ12mm or 11mm)
It seems to be able to use it for the upper side, but because the lower side seems to be severe, I decide to buy it again after measuring that side firmly! (Sweat)
I also had a little trouble because the Pliers I have are cheap 100s and not exquisitely open enough.
I'm not saying it's the fault of this product, just that you should buy good Pliers.
【Review】
I was satisfied with both the ease of use and the texture of the product.
Please measure the size of the clip before buying. (Obviously.)
View detail
I'll take this over Hose Band.
I put it on the car which is under construction. The size can be used for mesh hose, so it is more luxurious than just using Hose Band. I wish it was cheaper.... View detail
I think 13mm is OEMsize.
I used it on my DAYTONA Reservoir Tank Hose!
Size is 13mm
It was ExactlySize.
Abrupt angle will bend
View detail