Reviews
I think it's good
We wanted something easier to handle than the OEM Hose clip
I rate it highly for making maintenance a little easier and the peace of mind of a wide Clip
View detail
You should have a variety of them
I'm using it to replace the Hose in an older vehicle
Clip is often corroded, so it is useful to have it
One drawback is that it takes a HANG to remove it
It's hard to remove with a radipen
View detail
It is safe and secure to have
I use it when removing the tank, first try handling it securely and it stops firmly
If you use Tie Wrap etc., it may come off, but this one is safe to use And relatively Large? So it's easy to use
It is inexpensive and sturdy, and maintenance people should have one of these for safe work I think
In the Plug exchange, for the work of removing the front of the Tank, it is useful to use it occasionally
View detail
Clip for peace of mind
important item
[Was there anything that disappointed you? None Measure the outside diameter and buy it
Do you have any wishes or improvements you would like to make for the Manufacturer? It would be even better if it is easy to grab with the pliers when fitting it
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? Made by the famous Manufacturer of Motorcycle Accessories
How was your experience with it? They hold it in place
Was the installation difficult? Easy
【Please tell me the installation point and hang】 The most frequently used 9mm
[Was the Instruction Manual easy to understand? nothing special
[Included Parts:were they on? None
[Others]
View detail
Small parts, but well made
What made you decide to buy?
The purpose of the brake hose replacement is to reduce unnecessary contact and to give it a beautiful look
The deciding factor is that it has a coating that helps to prevent rust and scratches
How was your experience with it?
Fitting in with SWAGE-LINE's Rubber Bush, more than you can imagine It was
Coating also has a solid thickness, and it was unavoidably molded by Pliers during installation It did not peel off when the
Was the installation difficult?
It wasn't particularly difficult in the normal Bolt-tightening part, but
As noted below, I felt it would take a hang to install it with a short Boltetc
【Please tell me the installation point and hang】
When I tried to tighten the rubber bush between the rubber bushes with the screw
It is not possible to press it down to the end just by pinching it with your fingers, and the holes are not aligned
The short Bolt was in danger of licking the Screw pile if it was installed as it was
So, I used Pliers to install it in a close approximation of the finished form
[Was there anything that disappointed you?
It was generally in line with my expectations, but I would have liked to have had all the co-ating on anyway
I'm wondering if the parts without Coating will rust or not
Do you have any wishes or improvements you would like to make for the Manufacturer?
It would be nice if you could cover a wider area of the coating, preferably the whole area
Also, contrary to the above, I felt it would be easier to purchase the product if the price was lowered a bit
[Do you have any products to compare it to?
It's not a product, but you can either reuse the OEM Clamp
We have considered whether to purchase and install this product
Rubber Bush has also purchased the SWAGE-LINEBrand stuff
I feel it was the right decision to buy and use the Clamp
View detail
A little persistence
GALE SPEED
purchase for Radial Master Cylinder
As a result, I was able to stop it with Exactly
If it's just a Horse clip, you can get it at your local Home Centeretc. for cheap That's Color:There are a lot of Unpainted Clips, and this one, which is painted in black, is a little more particular Purchased
The black thing didn't stand out and I think it fit well
View detail
Fits: YAMAHA MT 25, YAMAHA MT03, YAMAHA YZF R25, YAMAHA YZF R3, YAMAHA YZF-R3, YAMAHA MT03
samco hose clip
samco hose clip, made in England.. that tells you all, the quality of the clips is the highest priority, compared to the high end stainless steel hose clips from Aliexpress these are still much much better. once you screw them up on the samco hoses you will just know how good they are. just, just that i didn't know that only 4 pcs are sent in the package, i guessed the purchase really meant for 4 units but i couldn't find the information anywhere, since there are 3 pcs of samco hoses, it means that I'll have to buy another 2 pcs, so unfortunate. View detail
Price qualified
Black was peeling off at the other imprint, but what I bought was solid with no indication of peeling at all.
It is a high Clamp, but I am satisfied with the quality as it is. There is not quite a black Hose Band.
I like it, I like Gladly feeling of Stainless Steel and Plating, so I like chic colors and I like them.
View detail
Attention to the tool to be pinched
Due to the painting of Black, ordinary Pliers will peel off paint.
Recommendation for use of SoftPliers.
The function as Band is no problem, it looks good, it is not cheap and it is a good product.
I tried to use DJEBEL 250 XC when installing Inner Pressure Control Valve.
At Φ 15, Engine side and Air cleaner side are Exactly, but KTMOEM Inner Pressure Control Valve is too small for this Clamp size unless it is thinned down by caliber. For your reference.
View detail
Black Because it is painted, it is expected to be resistant to rust
DAYTONAProductNo91247 (Φ15) Used for Hose's Clamp connecting Rear master and Reserver tank of ZrX 1200R.
Since I did not have matching information, I tried to buy one or eight, but the free diameter was slightly smaller than the OEM, but I could use it without problems.
OEMClampProductNo 92037-1547 is 1 pc. It is delicately high, 497 yen including tax. This is about 150 yen for two. Even if you pay shipping costs 500 yen it is cheaper than OEM. Besides, I painted black and it seems to rust from OEM rather than rust.
View detail
Fits: HONDA LIVE DIO, HONDA DIO (2Cycle), HONDA SUPER DIO
I am satisfied.
OEM Bolt was rusted so I bought it as a little Accent at my feet. Stainless Steel Design is also quite good. View detail
It can be used without problems
It is a very ordinary Hose clip. Since the Knob part is Large grade, install - Removability work is easy. I am using it to install Fuel Hose. View detail
Even things that can not be used are mixed
BackPressureValveQuantity : 2pc. Because we needed 8 Hose Bands with Set installation, Quantity : 1 Set of 3pcs. We ordered two ones, one that can not be used in one case is Quantity : 2pc. There was Set.
Finally found Material : Although it was Hose Band of Black color at Stainless Steel, some paint was peeled off when tightened, and painted again with heat-resistant Black after tightening.
It is not something that desorbs frequently, but it is quite regrettable.
In case of myself, the number has reached the limit in time, but if you purchase it, we recommend you to order more, including reserve.
View detail
To fix Brake fluidHose!
Tank hose of GALE SPEED (bremboTypeφ6) I used it for mounting.
Even if you contact Active, you do not know the outer diameter of Hose, so I hope that it will be helpful.
View detail
Coating is too durable
I was unable to get working time, just opened it and left on Garage.
Did you leave it for about three weeks?
The other day, I tried to install, the coating broke and it was peeling off berries.
Just placing it on Garage makes this terrible.
I do not want to get scratched by Gold genus and hurt by Hose so I will enter the store as it is.
It was Garbage.
View detail
Easy to pinch
Of OEM "of" The square shaped knob of the character required hang to twist with Pliers, but this is lucky. (If Space is a narrow car model, installation may be tough,. ) View detail
I was looking for something.
Installation of this Clip
If you narrow the part of the ring with your hand
You can pinch your finger with Hose
Using Radio pliers
If you put your tip in a ring
The work in a narrow place is really easy
For people who decompose Carburetor on a regular basis
There is no loss as I have one
View detail
Hose clip
Since Fuel Hose was deteriorating, Hose clip also got new
As for the performance we will hold Hold Firmly Hose so it was securely installed
The price is also inexpensive and it is the expected performance
View detail
Purchase
It is the second purchase.. Last time I bought T - REV Hose Band 16 - 25 but this time I purchased 13 - 20 for use for a little thin Hose. It is more expensive than normal Hose Band but it gives priority to appearance. It is not conspicuous with Black, but I am satisfied with things different from people. View detail
To accompany Fluid exchange!
This time, when the first Fluid exchange, for fixing the root of the Pump (Since I am worried ~ if it goes out ~) It became work of fixing with this item to! - - - Although it seemed that there would be no problem even if there was nothing, but for now tentatively! (Large Zen kaa!) - - - (Lol) View detail