Reviews
Quantity:It would have been better if it was 1 Set of 4pcs,
I purchased the 4mmSize Rivet because I needed it when installing the MC21 Screen.
What I wanted was 4 pieces, but the Quantity:I bought two because it was 1 Set of 3pcs.
There are two different lengths of 4mm Nylon rivets from KITACOConvenienceParts, and I was not sure which one was better. There are two types of rivets with different lengths, and I was not sure which one was better, If it's a scuzzy one, why not just put a Washer on it?" I bought this one because I thought it was perfect.
OEM Parts are still available, so if you are concerned, OEM Parts are the way to go.
I am satisfied with the price, which was less than the cost of four OEM parts.
View detail
Used for 250SL (Repair)
I bought a new Ninja 250SL… because I lost my push rivet at some point.
I purchased and used it. The quality is high and I can use it without any problem, but I still feel that it is rather expensive…
View detail
For dress-up and repair of seats!
Ideal for repair or dress-up of old seats.
It is nerve-wracking because once you drill with the Drill, there is no going back, but if you do it with vigor, you will be fine.
Rust is becoming a concern because of Steel.
View detail
Unchanging quality
This is the same quality as the NORMAL parts and is useful to keep in stock in case of damage or loss. The grip is easy to remove and install with a single push, and can be removed without tools as long as there is no sand or other debris caught in the grip. View detail
Refresh with ease!
It's been 26 years since My Monkey came to Japan with a new car.
I'm getting tired here and there.
On the Net, I happened to find this product, and since everyone's impressions were favorable, I bought it immediately.
Work with Kan Tan!
If you remove the Seat, you can replace it with just a Gold hammer and Radio pliers.
− working procedure
(1) Remove the Seat and tap the Rivet with a Gold hammer from the inside about 10 times.
(2) When you push Rivet from the outside, the clamping Gold is floating, so you can use Radio pliers to pry the clamping Gold inward little by little. (Rivet is still held from the outside.)
(3) A new Rivet was inserted into the existing hole from the outside.
(4) Push in the new clasp Gold from the inside using your fingertips.
Push it all the way down to the base, wrapping the excess leather around the Seat!
(5) Repeat 11 places. (In the case of a '95 12 VMONKEY)
→ finished!
It looks perfect, it's Polished!
Well, it's a world of self-satisfaction.
By the way, there will be 8 pairs left over for the 20-pack.
I can't help it because of Universal Product….
View detail
They were the wrong size!
Trial and error for Grom's Custom It's not easy to get used to, but I'm enjoying learning a lot of things I'm not used to it, but I'm enjoying learning a lot of things I do this with admiration
However, due to the inexperience of the work, we often lose sight of the small parts and break them When removing the exterior of the grommets, some of the material:You have to remove the plastic grommet (like a Rivet) At first I didn't know how to remove it, and when you push the center part with a thin stick, the whole thing comes out But at this time, I had too much momentum, and the plastic part in the center of the plastic part flew somewhere
So I've been looking for the same part for a long time, but I couldn't find it, and finally I found it! I was surprised that KITACO prepared such a small item for me What a conscientious company! However, the parts I received are the same shape and function, but the size is different (for groms) It was much thicker than the original We-Big's web site alone has a lot of different shapes and sizes, and I'm not sure which ones fit I don't know if this is the best for HONDA I'd really appreciate it if there was a Guide like that, but for such a small part It's not easy to prepare Large strange to prepare
View detail
I think whether it is an OEM Same Product
The plastic part has been removed many times
I will crack now..
It is safe to have several as Spare
Those of Size are not sold at Home center
View detail
It is Rivet for Yamaha - -
When car wash of ZZr 1400 I noticed that Push rivet at the lower Left Side of Upper Cowl is gone. I planned to purchase OEM Product as soon as possible at a nearby shop but I found that PushBolt for each Manufacturer is out from KITACO and purchased it. Originally for KAWASAKI's thing 7 Pi thickness was the thinnest Size so I thought this was fine, but the shape and thickness did not match when I actually wore it.
I removed the PushBolt of Right Side and checked it, the shape was slightly different but the one with the thickness of 6 pie for Yamaha fitted well. It was a story of the shop and it was a Parts for Motorcycle for FOR JAPAN MODEL, so it seems there is a size that does not fit if it is a re-imported car.
I bought the other side Push rivet at the time of purchase and it was earlier if I looked for the same Size but it took twice the time I thought it would fit from the number display of Parts List.
This time, for KAWASAKI 6 Pie Size did not appear, so I think that I could substitute for Yamaha. From now on, it will be helpful if you get Push rivet for reverse car.
View detail
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since construction material is a Plastic, it stops dividing and becoming useful. the Push rivet stops
Although it is a serious, convenient Push rivet whose attachment and detachment are possible in an One-touch -- If it uses for a long time since
construction material is a Plastic, it stops dividing and becoming useful.
the
Push rivet stops a Cowl, a Cover, etc. of a SKYWAVE -- alike -- if it is divided since a nail will break if it is used mostly, and it tries to use about, removing several times, he is trying to exchange
Merit well direction it considered the
Push rivet as consumable goods (^u^) Since a price is also cheap, the Push rivet (three-piece Set) made from the
KITACO.
It will purchase, if it sees in Schopp, and he is trying to always stock several pieces in a house (^-^) The
Push rivets are multi-use parts found useful in the Maintenance groups of removing Cowls well, in order to maintain.
View detail
Although the Push bull Rivet of the first GSX1300R HAYABUSA was damaged and brand-name parts were considered, since there were the goods here, it purchased. Satisfied [ since it was a special-shaped Rivet, it thought that there was no pure deer
Although the Push bull Rivet of the first GSX1300R HAYABUSA was damaged and brand-name parts were considered, since there were the goods here, it purchased.
Satisfied [ since it was a special-shaped Rivet, it thought that there was no pure deer, but the equivalent thing was found, and ], since it moreover obtained immediately.
Since it was only one use, the two [ remaining ] have been kept.
Since there is much desorption of the
Inner cowl, considering that it may damage from now on also, it is safe only by having a reserve.
View detail
It purchased as an object for repair of the Push rivet of the first GSX1300R HAYABUSA of '99~' 07. Since it was the plastic part, it deteriorated over time and ordering brand-name parts also took time, the equivalent article was found easily.
It purchased as an object for repair of the Push rivet of the first GSX1300R HAYABUSA of '99~' 07.
Since it was the
plastic part, it deteriorated over time and ordering brand-name parts also took time, the equivalent article was found easily.
Similarly attachment neither
form nor a function satisfactorily. [ a pure thing and ]
Since it is entering three piece although it is 105 yen in
one-piece conversion, and a required number is not suited, although the remainder will remain, it can be kept to future repair.
View detail