Reviews
181cc Gasket Kit
Quality looks as good as always from SP Takegawa, a good replacement to the old 181cc 2v gaskets that are needed to be replaced View detail
Attractive variety and low cost
Cost performance as a universal product is NO.1. View detail
It's thicker than I expected.
Gasket is a problem when there is no Manifold replacement or something like that.
It is better to leave it in Stock than to substitute it with a government Postcard or cardboard, which is not perishable.
0.8mm is thicker than expected.
View detail
good product
Cut and use Gasket yourself.
I thought the quality was very good, although it was a little difficult to cut because of its thickness.
View detail
For the old OEM discontinued Gasket.
[How is it used?
I was quoted to buy OEM Gasket during the Restore of the vehicle, but it was discontinued.
I could not do without it, so I purchased UniversalGasket.
How was your experience with it?
Material is difficult to describe, but it is quite solid.
I roughly cut it out with scissors and used a design knife to create the desired shape.
So far, I have been able to use it without any oil leaks, etc.
How did it compare to other products?
I bought it because it was relatively inexpensive compared to other Manufacturer's UniversalGasket and I could choose the thickness.
Also, thickness etc. will inevitably change from OEM, so if OEM parts are available, I think OEM is the way to go.
[Points to note]
Simple tools etc. for cutting out need to be prepared separately.
【Review】
It is useful for old cars that no longer have OEM Gasket, or when you need to finish it in a hurry.
The size is also quite large, so you can try again even if you fail a little.
View detail
Cylinder Head and Base Gasket Set for your SP Takegawa Big Bore Equipped Grom
About quality and texture: I am happy with the quality of gasket set from SP Takegawa, the base gasket is a paper material while the head gasket is metal. About the feeling of use: When it comes time to reassembling the engine after some major works a new set of gaskets is neccessary for the cylinder to ensure the performance is not effected by any leaks and these have done the job with with no issues. Products to buy together: Since the piston was removed for the major works then some piston pin c-clips would also be desirable to purchase along side this gasket set. Difficulty of installation: The process to install takes about an hour, you want to put the engine at TDC followed by removing the head and cylinder which will allow you to replace both gaskets. Clean the mating surfaces before installing the gaskets, reassemble and torque the head bolts in a criss cross pattern. A little difficult to do. Cost performance and comparison with other products: A High costing for gaskets but not ones that are changed regularly so the price can be considered reasonable and very similar to what you would pay for the same gaskets from Honda for the OEM bore size. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: This gasket seat is specific for the 181cc cylinder, a different gasket set is available for the 143cc cylinder. View detail
![Cylinder Head Gasket [GROM Big Bore Kit (ED12100K26xx): Repair Parts]](https://global.webike-cdn.net/uiu/impression/202205/23_1020995_628b2b0169913.jpg)
Fits: HONDA glom
ENDURANCE Head Gasket Replacement for 170cc Big Bore Kit
About quality and texture - Top quality. Aluminium material used for the gasket. About the feeling of use - Perfect alignment of all the stud holes and cam chain tunnel cutout. Products to buy together - For installing the head after the head gasket has been replaced you will be wanting to torque down the head nuts correctly so a torque wrench will be highly desirable. Webike have plently to choose from. Difficulty of installation - Simple to install. The surface should be free from any gasket material and wipe the mating surfaces with contact cleaner before assembly. Cost performance and comparison with other products - Priced well for a gasket that will not get replaced very often and priced similar to the OEM Honda and Takegawa ones. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Head gasket inner diameter sizes will vary with the bore size so purchase the one recommended for your setup. View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
I got the Shovel Kick pedal!
I was able to get Pedal at Kick start in Shovel.
In fact, GEARSHAFT came off, not Pedal.
When I removed the Kick Cover, I found that the Kick starterCrankGEAR had fallen off inside.
Moreover, it seems to have been violated inside, and a deep wound is in the state.
CrankGEAR was purchased separately, and ThrowOutBearing, which was broken in the derivation, was purchased at the same time.
In some places, there was a sign that GEAR was out of control, so I replaced various things.
Parts itself is inexpensive, which I appreciate.
After replacing the Parts, it came back without any problem.
A configuration diagram will help you get the job done.
View detail
Daytona Gasket Sheet (Part #96242)
This is nice and thick gasket paper. The colour is similar to the orange/brown in the main photo (not grey unfortunately). It's a nice and large size as well - see the review picture with spark plug for scale. Worked well on a small engine cover. View detail
Daytona Gasket Sheet part no 96237
This is very high quality gasket sheet. The reason being is that it is the exact same brand as Yamaha OEM so it works perfectly. You can cut your gaskets for discontinued gaskets, just like OEM. My only complaint is that it too small! A larger sheet size would be great so we can cut a larger gasket. View detail
I'll try to make my own Gasket, but...
I bought it to make a Gasket for my Grom Clutch cover. But when I tried to make it, it was very Large strange to make it myself and I regretted that buying the OEM was the best way to go. View detail
Fits: YAMAHA RX100, YAMAHA GRAND AXIS, YAMAHA BWS100(BWS)
They are the necessaries of an overhaul. There was also no problem of wearing in particular. Since it is it and a set article, it is saved.
They are the necessaries of an overhaul.
There was also no problem of wearing in particular.
Since it is it and a set article, it is saved.
View detail