Reviews
Used for the first Oil change in my life
I'm an old man who has been riding for more than 20 years, but I haven't changed oil by myself for a long time, but this time I tried to do it. I bought a Oil Jug for this purpose.
I researched the SV650X and found that it needs 2.75L when replacing the Oil filter, so I researched the jug to fit it.
I bought the 2-liter one because I thought I could split it into two portions because it was too large to keep.
When you open the lid to put in the oil, there is a net to prevent foreign substances from getting in, but it is not good.
When I poured Oil, it didn't go through very well and I spilled it on Sheng Large.
I ended up taking it off and putting Oil in.
View detail
Store as is
It is convenient to store it as it is when it is left over because Cap is attached to jug. View detail
For those who change the oil by themselves!
It's a 2Type L Oil Jug, so it's not too large, but just the right amount of large to be easy to use!
The current model has a Cap as shown in the picture, so it is very good without dust ♪
View detail
ดีมากเลยครับงานดีกว่าที่คิด ถ้าเป็นฝาแดงเหมือนในรูปจะดีกว่านี้ View detail
Just the right amount of Large
I bought this for my CT110 HUNTER CUB to do the oil change myself.
Not too much, not too little, and it's for 1L.
I decided on this product because it has Memory, a lid to prevent dust from entering during storage, and a Cap on the spout.
The hose on the spout seems a little too long, but it's easy to use.
View detail
Oil is vital for both cars and motorcycles
This is the main oil replacement for cars now, Busa, cbr1000rr, TENERE700, cb650r also use this 2liter, 200cc, 1liter thing and measure the amount well. We use YAMALUBE synthetic 10W40 for motorcycle and Shell for car, so we wash the car oil and motorcycle oil after use to avoid mixing them. View detail
Let's measure exactly how much Oil we have.
We use 2 kinds of oil, 1liter and 200cc, because too much or too little oil can damage the engine. View detail
Easy to get in!
I purchased this for use when changing oil.
The scale makes it easy to measure the right amount.
In addition, the spout is thin and easy to pour.
It also comes with a Cap so your Oil won't drip when you're storing it.
A Cap is also included at the point where you pour the oil into the jug, so there is no dust buildup in the jug.
View detail
Of all the Oil Jugs I've ever owned.
This is the best Oil Jug I've ever had.
The spout is small, just for Motorcycle.
The one at Homsens has a thicker spout and a shorter bellows, probably because it's intended for automobiles.
This is essential for motorcycles that have small oil inlets and are located in intricate areas.
View detail
Convenient and easy to maintain. (* 'Ω `*)
I bought two of these for the maintenance of my CRF150R, one for engine oil and one for gear oil.
I didn't want to have to go through the trouble of checking the level gauge many times when I put the oil in the oil can, so I measured it out and put in about 80% of the specified amount of oil, and then checked it twice to make sure that the oil was injected properly.
Because it is with a lid, it is glad that dust and Garbage do not enter when storing.
I have used it once and kept it by just lightly throwing out the oil inside, but it does not show any deterioration, including the bellows part. I have been using it for about two years in this storage method.
The price is a bit high and the spout doesn't fit in the spout of my motorcycle, so it would be easier to fill it if it was 5mm thinner.
View detail
Oil changes are a breeze!
So far, if you buy a 1L can at We-Big, it comes with a Nozzle, so you can use that to get your Oil I was pouring
But if you want to use up a 1L portion, it's fine, but if you want to subtly pour 0.3L or so, you can use a Large body The replacement process was not so neat because I was doing it
So, unusually, I bought a 4L can of Oil Jug to go along with my purchase of a 4L can
I bought the 1L Size because I thought I would have trouble finding a place to put it if I bought a large size
As it turns out, you bought it and you were right, Large!
You need to transfer it every time, but you can measure and pour exactly what you want while looking at Memory So you can keep the right amount
It also has a handle, so you can't accidentally let go of the can and let it become a Large disaster It can be prevented
You can prevent Garbage from entering inside because you can put a lid on it after use, and you can safely It can be stored in the warehouse
However, there's nothing to block the Nozzle part, so if you're worried about it, you can get it on the tip You might want to do something like packing Dustcloth
I pack PaperDustcloth
I will continue to use it
View detail
oil change
I bought this to change the oil myself It's comfortable. It's a good product. The oil is supplied by the manufacturer of the bike. When the oil filter is exchanged on the manual, the amount of oil is determined when not exchanging oil. Therefore, accurate measurement is required. It's a nice product. translated by Google Translator View detail
It has a memory with 200 increments
I bought it to replace the Engine and Defferential oil
Memory is easy to adjust because it is included in 200 increments
It doesn't have a lid, but you can clean it with a parts cleaner when you use it
I recommend it because of its low price
Since the mouth is small, the Coolant liquid can be refilled or replaced
View detail
Oil change essentials
my jug is old and I am replacing it There is a lid on the end of the Nozzle as well, so you can use it when you are not using it I like it because it doesn't get Dust in it View detail
Normal good
Because I used it for the first time, I can not compare it with others, but it was comfortable because it entered the necessary amount at the same time.
Because it is with a lid, is it easier to store compared to without lid.
View detail
It is better to have a lid
Oil Jug is used only a few times a year so it is mostly placed in the crib, but where the dust and Oil Sauce are concerned.
Since it has a lid here, neither mixing of Dust nor Sauce of Oil is worrisome.
Regrettable place where Memory has only Liter unit.
Oil Filter Since fractions are given at the time of replacement, at least it is necessary to scale by 500 cc increments.
We measured with Measuring Cup and wrote it with Magic pen.
View detail
Oil exchange more optimally
I have been exchanging Oil without Oil Jug so far, but I put it in and purchased this time because it was troublesome by checking the amount.
Because the Large is 1 L, we do not take up the space, so we can also store the lid so storage is perfect.
Because Memory is also fine, it is also good for masters.
View detail
Jug is good KITACO!
Poly made Oil Jug think that KITACO is the best.
I bought it because I did not have 1 L Oil Jug. Until now I have used 2L jug, but with a small amount of weighing it is still inconvenient.
Why did not you buy it sooner?...
I saw a variety of other companies' Oil Jugs, but I think that KITACO's Oil Jug is the best.
View detail
With lid Point
The point with the lid is Point though no matter what. There is no worry that garbage will enter the Oil during storage.
There is 600CC in Memory, which is ideal for SUPER CUB.
View detail
In changing the oil by oneself, it decided to purchase, since an Oil Jug is needed.When it was searching with the lid so that a Garbage might not enter since the oil change was performed at the pace once in half a year, as for capacity which found thi
In changing the oil by oneself, it decided to purchase, since an Oil Jug is needed.When it was searching with the lid so that a Garbage might not enter since the oil change was performed at the pace once in half a year, as for
capacity which found this product with a cheap price, those of 1, 2, and 5L with three kind and 2L container in it were chosen.The scale serves as a 0.5L unit.A lid is a Type which is an insertion type, and it pushes up and opens.
which was a screw type here as removal also of a Nozzle and an Oil Jug was completed -- the Nozzle was instantly attached to the Oil Jug, and the lid was opened and it was used, having put in the Oil.In the place which said that the ease of pouring was not too bad, and common, although the Oil all also flowed into the bottom, the Oil which made the Oil Jug reverse and remained was taken out, after
use which remains in the bellows portion of a Nozzle covered, and it was put into the bag and it kept it.Since the Shutting-out
price was with the lid at a low price about the Garbage and the Dust now, it was good to purchase.However, when the scale below 0.5L was a 0.1L unit, in addition, it was good.
View detail