Reviews
Not Just an Oil Jug!
【Impressions】
I am satisfied with this product because it is not just a product to put oil in and pour it, but a detailed device that makes it easy to change oil for motor cycles.
[Good point.
Scale in 100 ml increments
Many products do not have a scale or are measured in 500 ml increments, but the Large body is measured in 100 ml increments.
●Cap included
A cap is attached to the nozzle tip and to the oil supply port to the body.
Prevents dripping during storage and foreign matter from entering the body.
Mesh is attached to the root of the nozzle.
It has a rough mesh. Even if insects or parts fall on the body, they can be caught.
[What's on your mind]
Nozle is not self-supporting when attached in the empty state.
Be careful when filling the jug with Oil because the jug may topple over on windy days.
When putting Oil in the jug, it is safer to remove Nozzles.
No place to put the Nozzles when they are removed.
I would like to be able to keep the removed Nozzle attached to the Body. This is my hope.
★I introduce the maintenance method of SUPER CUBPRO in my blog.
https://cub-noru.com
View detail
For water replacement of Radiator
It is just the right size to refill the Radiator and other water containers.
Large jugs are troublesome to wash and store, but this one is 1L, so it is small and easy to handle.
View detail
Easy to use Oil Jug
[How is it used?
I bought it to replace Oil at home.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I like the tip Cap and Size and
I thought it was very nice to have a lid.
It's safe.
[Points to note]
Do not misread Memory
Do not make a weighing mistake.
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Just the right size
It is for 1 liter, so it is useful for refilling the Radiator with water.
It is easy to use because it is inexpensive and can measure quantities well.
The body size is also small, so it does not take up much storage space.
View detail
This is the only option.
[How is it used?
Used for Oilfor Replacement.
How was your experience with it?
It is insanely comfortable.
It is great that there is a lid on both of these when the Nozzle tip and Oil are inserted.
Without a lid, dust and other debris will inevitably get in.
This eliminates all the hassles of cleaning them with Parts cleaner each time, or keeping them in bags to prevent Garbage from getting into them.
It is wonderful that no impurities are mixed with Oil.
View detail
Ideal for moped Oil replacement
This is my first attempt at changing oil. I have been asking the shop to change the oil in my other ZX-10R, but I tried to change the oil in the ZOOMER by myself. To sum it up, it is very easy.
Various Oil Jugs are available from other manufacturers, but I think Motorcycle Products Manufacturer is the easiest to use for Motorcycle use. The deciding factor in purchasing this product was that it comes with a lid and the memory is engraved in 100cc increments.
The Oil Exchange is an opportunity for me to try other maintenance by myself.
View detail
It's quite easy to use, but …
Purchased for Oilfor Replacement.
On the plus side, it is inexpensive and easy to use.
The bad points are that the spout is a little thicker and the volume Memory is rough.
I'm wondering if there is anything more that can be done about the bad points in particular…
It is not an expensive product and I will buy other products to see how they compare.
View detail
I like that it has a lid.
The lid is attached to the
Prevents contamination of Garbage, etc., before the next Oil change.
Since it is not possible to wash it every time, it is left as it is after use.
The next time you use it, put Oil into it.
The lid is helpful because you don't have to worry so much about Garbage contamination.
The container itself is thick and sturdy, so it can be used for a long time.
View detail
Easy to use and satisfactory
I buy several cans because they are inexpensive and use them separately for coolant and oil. 1LiterOil cans need a little attention because they almost overflow at the limit when you put 1Liter of oil in them. View detail
It's a lid, so Garbage won't fit in it.
DIY oil replacement is something that is only used a few times a year.
I didn't like that the jug I used to use had to be cleaned first before I could use it again if I didn't take measures to prevent garbage contamination.
This jug has a lid, so I don't think I need to be that nervous about it, but I won't know the results until I've used it a few times.
In the picture of the product description, the cap of the spout is Red, but the one I received was White.
View detail
Convenient with a lid
I used to store my Oil Jug in a bag because Garbage would get in it when I stored it, but this one has a lid, so it's less work and more convenient.
It was easy to understand the amount because it came with a memory.
View detail
ได้รับของถูกต้องสินค้ามีคุณภาพ View detail
Would be great if the spout was thinner.
I use this one because the Large Size is in the way.
The spout on the engine side of the Scooter is also small, so if the mouth of the jug is also a little thinner, there is no need to worry about spilling.
View detail
it is normal
It is a normal OilJack, but it is convenient because it has Memory. I think that it is a convenient commodity when there is it. View detail
It is good to have many Type of capacity
I bought the 1L one, but since I bought the Large type, I needed more Oil at once, so I bought the 2L one.
It is as easy to use as the 1L.
View detail
Improved workability for oil replacement
When I changed the oil, I used to put in the oil with a conventional roto, but the diameter didn't match and it leaked.
The Nozzle tip diameter of this product is Exactly the same as the Motorcycle side inlet, and I felt that it is indeed a Motorcycle product.
Also, the tip of Nozzle has a screw, and it can be sealed with the attached cap, so it doesn't stain the surroundings with the oil left in Nozzle when it is stored.
I wanted a scale in 100ml increments, so I went with 1L. The durability is yet to be seen, but if it lasts to some extent, I would like to Repeat.
View detail
Oil Jug with Lid
[How is it used?
I bought this to replace my old Oil Jug which was too hard to use.
Was the one you received as per Image?
The product was exactly as shown in the picture and there were no problems.
How was your experience with it?
There is also a lid on the Nozzle, so even after you've finished using it, you can store it without dripping oil, so it doesn't stain the surrounding area and can be used in a clean way, which is very helpful.
The scale can measure up to 1 liter.
[Points to note]
The black lid at the top is very easy to remove, so be careful.
Even if you close the black lid, you can't prevent it from overflowing by slanting it.
How did it compare to other products?
The Nozzle tip lid is still reassuring.
I think it's a big difference between having this and not having this.
It's very helpful because it's so messy to think about all the drips and spills.
View detail
Cheap and easy to use
The Oil volume of my Motorcycle is 3.3Liter.
With this Oil Jug, it is easy to measure 0.3 liters after pouring 1 liter 3 times.
For cleaning after use, spray a Large amount of Percuri and rinse and wash.
Leave it upside down and you're done.
View detail
Used for the first Oil change in my life
I'm an old man who has been riding for more than 20 years, but I haven't changed oil by myself for a long time, but this time I tried to do it. I bought a Oil Jug for this purpose.
I researched the SV650X and found that it needs 2.75L when replacing the Oil filter, so I researched the jug to fit it.
I bought the 2-liter one because I thought I could split it into two portions because it was too large to keep.
When you open the lid to put in the oil, there is a net to prevent foreign substances from getting in, but it is not good.
When I poured Oil, it didn't go through very well and I spilled it on Sheng Large.
I ended up taking it off and putting Oil in.
View detail
ดีมากเลยครับงานดีกว่าที่คิด ถ้าเป็นฝาแดงเหมือนในรูปจะดีกว่านี้ View detail