Reviews
I can't give it to you without it. It is a must buy!
I bought this Option to use the Jay Trip , Low Roller stand (item #:JT-1052QR).
"V-receiver, 2." They say.
To begin with, I did not purchase STAND out of necessity, but I purchased YOSHIMURA's Rear Stand Bracket Set for VSTROM250SX. (M8) I had been putting on the Option (Option 1) for the time being, so I bought this Option because I had seen it being used with the Jig Sur which is almost the same as the Option (Option 2) and I thought it would be good.
As expected, it worked properly.
However, if you don't use it well, the red rubber part on the end may come off, so it seems that you need to get used to it.
I am a novice when it comes to STAND for RoadMachine, so I will do my best to familiarize myself!
View detail
good quality
Purchased as an addition to the company's Roller stand.
I don't have to tell you about the fit and consistency. I have used it without any complaints.
However, it seems that a protruding part has been added, but I have no idea what this is for...if anyone knows, please let me know.
View detail
Combination with SNIPER
I purchased the SNIPER Racing Stand Hook for my 2019 ZX-10RR.
STAND-UP has also become easier.
View detail
I'm not sure when it was lost.
I bought it because one of the four was gone and the other was cracking.
It explains that double-sided tape makes it harder to remove.
If so, I wish they would put it on from the beginning.
It was a hassle to put it on, so I used Vinyl Tape to prevent it from coming off.
View detail
Fits: DUCATI Panigale 1199/1098(rear)/1198/STREETFIGHTER1198/Deer Bell MULTISTRADA 1000DS1200 MONSTER S21200/Setc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc.
Short and unsettling, but functional enough.
[How is it used?
For home maintenance and custom
Was the one you received as per Image?
As per Image
How was your experience with it?
Shaft is short and I'm afraid it will fall out.
[Points to note]
Nothing in particular, as long as it fits the diameter of your car model.
How did it compare to other products?
This price for one Shaft seems high, but I have no other choice.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Required when removing Tire.
I usually use Stand for Beginner.
When you remove the tire, you are using a V-bracing system, and it is nerve-wracking when you are handling a heavy motorcycle. If you're not careful, you'll end up on the ground.
View detail
I knew it was a special product...
[How is it used?
I purchased this product because I needed it for front maintenance of my Grom JC92.
Was the one you received as per Image?
The color was as I imagined, but the color was only Gold (Black at the time of sale?), so I thought it would be better to replace it...
Was the installation difficult?
No problem, just plug it in.
How was your experience with it?
This is a special product and can be easily lifted up by simply inserting it into the round hole at the bottom of the Stem. However, it is recommended to check the hole when inserting it to avoid hitting the Special Knife boss on the body....
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction of the product is perfect, but I feel that the price is not commensurate with the quality.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've been wondering whether I should buy a JT-113 or a JT-116 since I bought my first Grom, but I decided to go with the JT-113 because I have a JT-116 that I've been using for a while. The JT-113 is fine for maintenance around the wheel and brake, but for overhauling the front fork, the JT-116 and the SPECIAL Knife boss are better, so I decided to use this one. Also, I think the price is still too high.... If the price was at least 3,000 yen, I think everyone would buy the Grom Owner without hesitation, but what do you think? Also, if there were more color choices, it would be more enjoyable.
View detail
State the dimensions.
Nowadays, I don't understand the sensibility of selling such attachments without stating the dimensions.
The product itself is not particularly problematic, but depending on the condition of your Swing Arm or Hook, the Rubber cover may fall off every time you raise or lower it, which may be annoying.
View detail
Parts for Rear Stand
outline
V receiving bracket for JtripRear Stand.
Reason for purchase
I decided to buy J-trip's Rear Stand, but the receiving bracket was sold separately. There were various shapes, but the V type seemed to be stable, so I bought this one.
Bundled items
VReceiveBracketQuantity:2pc. Set
How to assemble
Just insert it into the Rear Stand side and tighten the Knob on the Rear Stand side, so it's easy.
how to use
There are many different types of Brackets available for different models of vehicles and brands.
ZX-10R (2021) But STAND (JT-125) and Hook bolt (JT-107D) combination to secure the brake lever and prevent the vehicle from moving.
I didn't know which direction the V receiver was facing, so I checked with videos and HP etc. and installed it.
The STAND was placed near the Swing Arm, and while holding the rear of the vehicle with the Left hand, the Right hand adjusted the position of the STAND so that it rested on the Hook bolt, and while holding the rear of the vehicle with both hands, the STAND was applied by stepping on it with the feet.
After lifting up, the position of the V receptacle was not so good, so I lowered it once and adjusted the position of the V receptacle by loosening the Knob, so I have the impression that the adjustment is a little complicated.
Impression used
It is necessary to adjust the width direction of the V receptacle at first, but once it is adjusted, it is relatively easy to use thereafter.
Improvements
When I unloaded the car, the rubber for the protection of the V receiver came off with both sides of the car. it was written in the instruction manual, so I think it is easy to come off.
V-ring mounting orientationQuantity:Pair (for Left and Right) It is easier to identify the Body so that the
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Bad weld spatter marks.
[How is it used?
Installed external Stand Hook on MT-07.
The Hook is very low, so it was introduced to reduce the force required to Lift.
Was the one you received as per Image?
Unlike the STAND receivers I've purchased, there are so many weld spatter marks that they are unsightly.
A bit of a shame
How was your experience with it?
I was able to lower the Lift amount considerably by using this.
Short roller stands can also be lifted with one hand.
(Originally, you had to put your full weight on it to Lift it)
[Points to note]
Depends on the make of car.
I think that in many cases, the width is not enough unless it is STAND of Wide Type.
(Because I use about 30mm of One Side in Crank part)
View detail
Minor change
A while ago, I found out that Rear stand has changed its model.
When I asked for details, he said they just added this part.
Version up to the current model if you wear this!
View detail
It's a Repair Parts product, but it seems to be attached to the recent STAND.
[How is it used?
I used it on my original Rear stand made by JTrip.
I ordered this because I heard that it would eliminate the rattle.
Was the one you received as per Image?
It's a product made in such a way that I wonder why it wasn't made before, but I like this kind of improvement.
How was your experience with it?
It's definitely not rattling anymore!
However, it seems to be no good if the screw hole has been damaged. If you are using the old STAND, you might want to replace it once.
[Points to note]
As long as you pay attention to the direction you attach the Nut, you should be fine.
View detail
It was featured on the Commander's FB page, so...
There doesn't seem to be a STAND that can front up without interfering with Cowletc. in KATANA.
I was introduced to it when I took a peek at the Commander's FB page, so I thought I'd buy it before it was gone...
At that time, Webike didn't have it, so I bought it from another shop.
The installation is not a problem at all, but I don't know if it is individual difference or the hole under the Stem of front 16in. second type KATANA is larger than other vehicles, but with 19mm diameter, it feels like a governor.
He's got a long neck, he's a governor, and he's on the Commander's FB. "Attachment causes Lever to take effect, so riding with STAND-UP, for example... I don't want to overload it because I was warned that I would have to.
In the picture that has been introduced is Black, but the goods that have arrived are per Large? Is it Gold.
It was a shame that it was scratched a little, but it will be scratched with use, so I gave it a finish.
View detail
Fits: DUCATI 1098, MV AGUSTA Cantilever Swing Arm All Cars, DUCATI 1098, MV AGUSTA All models with cantilever swing arm, MV AGUSTA All models with cantilever swing arm
Don't forget to buy.
Some people might buy the Rear stand and forget to buy the Shaft.
Buy the correct diameter for your vehicle and do not forget it.
View detail
Loss.
When you buy a JTrip STAND, it comes with it, but if you only use it for a certain model of car, you won't use the other colors.
I lost my Large when I decided to use it for a different car model.
Next time I'll make sure to manage it so it doesn't get lost.
View detail
Fits: HONDA VFR750F, HONDA RVF750, HONDA VFR400R, HONDA RVF400, HONDA NSR250R, BMW F800S, HONDA RVF400, HONDA RVF750, HONDA RVF400, HONDA RVF750
MC28 Type 94 - Matching with NSR is not enough
Application of MC28 Type 94 to NSR
Because the shaft on the STAND side is too long, it cannot be inserted to the depth of the hub (If the insertion is shallow, it will be unstable) (that is)
The shaft outside diameter is slightly smaller than the hub hole (inside diameter) (less than 1?)
When NC30 VFR is applied (no problem)
Since the shaft for CenterWheel fastening is not used, the shaft on the STAND side is not used I was able to get all the way in
The fit between the hub hole inner diameter and shaft outer diameter was appropriate
View detail
Appropriate or inappropriate by Motorcycle
I bought and used Nanja 1000 for the Chinese character,
If you do not pay attention to Stand Hook Bolt, it interferes with the heat-resistant Plate of the Exhaust System and interferes with the interference or Swing Arm, so I need to be careful. I tried including HEMO bolt including various OEM products, but it does not go well.
Cutting of heat-resistant Plate may be the best.
That is why I used the character bracket, but care must be taken when using it. (OEM case) I will hurt you..
Right Side is like Quantity : The place to set is limited, attention is required for Rear brake Pipe.
Left Side is Quantity : If the place to set is too far forward, it hurts the Exhaust System and it will hurt.
Different from character receipt Quantity : It is easy to shift back and forth when setting (Since there is Hook bolt, it is not shifted back and forth) , Quantity : Pair (for Left and Right) As we can easily shift about, we must be careful to be parallel with Tire (Even if it is silent letters are made parallel) And before and after Quantity : Pair (for Left and Right) And need attention. Actually the corner Pipe hit the Exhaust System and the bottom of the Exhaust System dented.
Although the OEM Hook bolt is shown in the picture, it is installed in a way different from the original so as not to go before getting a letter hit.
However, since Right Side has Pipe of Rear brake, it is not useful..
Although I am using J-trip by trial and error as above, Exhaust System exchange may be the best solution
Conclusion is that NINJA 1000 needs sufficient attention to use, it is not used in winter keeping.
Eliminator 125 can be used without any problems.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
It is sold separately, expensive, and it does not have a good texture.
Required for Maintenance of ZrX1100. I bought it together with Short wide Body.
Basically I can lightly lift without problems at all. It is very convenient and frequently used.
However, ZrX requires this dedicated hook, the discount rate is low only for this hook, and the result total Gold amount is quite expensive.
As this Hook, Plating Specification I bought it expecting rust prevention, but when I look at the actual thing Plating seems to be thin, this is worrying about durability. I see the state while regularly rust-proofing.
Also, although others have been pointed out, the Red Protection Rubber at the tip easily falls off. From now on think about handling such as binding with Tie Wrap.
However, since it is necessary to Lift ZrX, I do a good job with Body Set, so I recommend it to those who do ZrXMaintenance.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
I think that things are solid.
Since I did not use the exclusive thing before lifting ZrX with Maintenace Stand before, I knocked down. Also, I did not do the same thing so I bought it. I have not used it yet, but I think that I can work safely with this. View detail
Fits: DUCATI 1098, MV AGUSTA Cantilever Swing Arm All Cars, DUCATI 1098, MV AGUSTA All models with cantilever swing arm, MV AGUSTA All models with cantilever swing arm
If it is a bit thicker - - -
Purchased with JT - 136 cantilevered STAND and Set with AGUSTAF 4 purchase.
It is a pity that looking and making is good, but the Shaft diameter is narrow with respect to the Axle hole on the car body side, and shaking the car body with the lift up state is pretty good to be glazed.
Perhaps it matches the Axle hole diameter of Ducati ???
View detail