Reviews
Maintenance Stand Buddy
This is to keep the front brake engaged when setting up the rear maintenance stand.
I've been using mine for about 8 years now, and it's still working.
Put the Black Rubber part through the Brake lever and put the Red Material part through the Brake lever.:The Plastic Hook is hooked to the Grip.
In this case, if this product hooked on Lever is pulled and hooked on Grip, it may shorten the life of the product by applying more tension than necessary.
It is easy to do if you grip the brake lever with this product hooked on the Lever, and then hook this product on the Grip with the Lever retracted by hand.
Without it, you will have a completely different feeling of security when you call for a maintenance stand.
I mean, once you know this, you can't even use STAND without it.
It is strongly recommended to use safe goods like this product especially for beginners who are not familiar with it.
If you are stingy with the 1 to 2 thousand yen and beat Motorcycle, you will lose your fortune.
View detail
They break down quickly for the high price!
It is a brake lock used for maintenance etc. As shown in the picture, the rubber of the part to put Lever is broken and it cannot be used immediately. Because it becomes individual Youth, the use frequency becomes about 10 times. The cause is thought to be that the material of the broken rubber part is hard rubber, and it is easy to crack the pack because of low elasticity. I thought that JAPAN of JTrip etc. was good because reliability is thought to be low in the overseas Ally and company manufacture. View detail
It is easy to use and simple to use.
I always use the Jack to float the rear tire during chain maintenance. It is very convenient to use it to lock the front brake at that time.
It's very easy to use, safe to use, and excellent.
View detail
I highly recommend this one!
I always use them to park on my Large Motorcycles! There are plenty of similar products out there, but the Ende RANs and the other cheap ones broke right off! As I said, it's as sturdy as it is expensive! I recommend it! This time I bought it to use on the CYGNUS 5 model View detail
When using Maintenance
When I bought Rear stand
Recommendation I bought it because it was on the item.
Because the front brake was working tightly
I was able to use Rear stand with confidence.
It is slightly expensive, but it looks good.
View detail
Because there is no Brake Lock in DIO
There is no device to lock Brake when stopping on my DIO 110.
Even when it stopped with a signal, moving it when I released my hand from Brake lever was troubled.
So that's what we're looking for, we got BigGarage. I found a lock and ordered it, but I was giving up because stocks "0" did not know the arrival status, but I found this item and ordered it.
The price hesitated by saying that it is twice as much as the weighing BigGarage product, but decided on importance from necessity rather than price.
Items arrived in about two days so use them immediately on rainy days (Provisional) saw.
Comment though
1. attachment (Installation) It was easy to grab the Lever and hang the Rubber part over the Lever and hang the red part by hanging it
2. I think that it will be utilized for both CB and DIO 110
It seems a bit sweet on RearBrake lever at DIO
It seems that there is no problem with braking.
On the FrontLever side it enters with a little stiff feeling but it was attached as Firmly.
3. Although I tried to attach to CB, this is still a little loose feeling, but as I tried to actually push and pull it I will be fully locked so I think whether it is useful when using MaintenanceRear stands or Roller stand -
After that it is durable but Rubber (Rubber) It is 2000 yen how much part it holds, so I think that it is a pain to buy again, but I think that it is a consumable item so that it can not be helped.
I always carry around with DIO 110, and let me use it when parking or parking.
Since Color is also Red, it may be good to wear when wearing
Although I feel afraid of being stolen (Lol)
View detail
It is necessary for Maintenance
I used Tie Wrap to lock the foil,
Purchase because it discards each time because it is unworthy of purchase.
It is easy to install, removable, easy to use with One-touch.
It is plenty of weakness that I did not even know that such a product exists
If I am a self-maintenance faction, I think that it is a product that is not damaged by buying it.
I guess it's a bit expensive (haha)
View detail
To accompany Maintenace Stand.
There are various things that can be used as substitutes,
Purchasing Jtrip recommended this time using Jtrip's Rear stand, it seems that the frequency of use is likely to increase.
As Lever is slightly farther away, it may be necessary to adjust the Lever side at the limit as it is to hang it, depending on the person every time.
As a Zvorra, it is complainable that it can be adjusted a little more widely, but it is firmly fixed and fulfills the role.
Recommendation for those who frequently apply MaintenanceSTAND at home.
View detail
Quantity : 2pc. It is a set eye..
Previously I used Velcro's Band I bought at 100, but it's better for Kole to be installed.
I will put KDX on Car but I will go to Transporter 1pc. It is always loaded.
Since Front's Brake is applied, it can be fixed securely.
I bought it for my home so that I can not move down and forward when moving around my house and having many children parked at Center Stand.
I use it for safety when maintenance, when I do not want to go before.
View detail
He is ariete Alito although the binding band (Cable tie) etc. were used until now at the time of Maintenance-stands use. A Brakes lock can be used easily and its appearance is also good.When there was no Cable tie, worn-out socks were substituted.
He is ariete Alito although the binding band (Cable tie)
etc. were used until now at the time of Maintenance-stands use. A Brakes lock can be used easily and its appearance is also good.When there was no Cable tie, worn-out socks were substituted.
View detail
It purchased to the Lift ups of the GSX1300R HAYABUSA.Although bound with the insulation lock each time until now , since it was also cutting each time, it purchased. There are also no worries about coming out and it can use it in comfort.Probably
It purchased to the Lift ups of the GSX1300R HAYABUSA.Although bound with the insulation lock each time until now
, since it was also cutting each time, it purchased.
There are also no worries about coming out and it can use it in comfort.Probably, they are necessaries at the Lift up of the
large-size car.
View detail