Reviews
I used it for the first time.
After installing Bore Up Kit on GORILLA, Gasket's processing leaked well Oil so I bought it. There is nothing special because it seems to use only Oil and rub it lightly. The surface became beautiful and it seemed not to leak because I saw it.
Although durability is used only once, it is essential observation, but if you use about personal impressions after about 5 times you will be able to step and it will not be usable.
I will buy it again when it becomes useless because this price. Do not do this Oil leaked and buy Gasket again and work again Because time and Gold will be in vain...
It was a good learning experience..
View detail
Items essential for Motorcycle tampering
Crankcase, Clutch cover, Cylinder, etc. There are lots of sides around the Engine that are sealed by Liquid Gasket. When maintaining such a part, Gasket does not work effectively unless you finish the mating face smoothly, it is the source of unexpected Trouble such as Oil leakage.
So, it is essential item for those who do Motioncycle messing with DIY. If it is for personal use, I think that it is unlikely that wear out and run out, and the price is reasonable so 1 pc. We Recommendation to have.
View detail
Purpose of purchase ...
The purpose of purchase was to use for Motorcycle, but because my friend's car was so dirty I used it over there.
Naturally, it is easy if you do not forget the dry wipe Dustcloth.
View detail
CycleCare Ultra FineSteel wool
I bought it to remove corrosion peculiar to Aluminum
This is good because it can polish up to the mirror one step just by dropping Clear just by lightly costing
The difficulty is a lot of kasu, Wool decreases unexpectedly with its momentum
View detail
Coolant exchange
I used it to extract Coolant in Reserve tank when I changed Coolant today..
I was able to extract it effectively.
Quantity : As I bought 2pc, the other used for Brake fluid exchange.
We also used it to extract the Fluid in the Reserve tank. Because it has a lot of inhalation, I have not sucked it many times.
View detail
It became hard to spill.
Until now, Oil was received at the BOX of the pla, but when transferring to a separate container of waste oil processing, there were many cases that it spilled on Sheng Large, but the Oil pan with Nozzle got less coarse Was.
By the way, us Oil amount at ZrX 400 : 3. 2L (Remove Filter) is.
Products are 3. I use a 5L capacity item, but when I receive an Oil it will accumulate up to 3 to 4 centimeters from the top.
Even if you lift the product by receiving Oil as it is, the container is solid without deforming.
Just when we process waste oil, wide mouth like shochu Plastic bottle (4L) I moved it, but carrying it is regrettable that Nozzle does not fit in my mouth ,,, I expect it to improve without using a funnel.
View detail
It's neither good nor bad
Grip bonds do not spread widely easily when exchanging - There are things that do not bond.
If the bond is not perfect with Grip bond, Grip will spin around while driving, so we fixed Grip with BondPlus, Wire.
View detail
For Valve clearance measurement ...
In the item description, "measurement range 0. 04mm 0. 05mm 0. 06mm 0. 07mm 0. 08mm 0. 1mm 0. 30mm Quantity : 1 Set of 7pcs. There is, but 0. 15 mm and 0. Since there are 2 pieces of 20 mm, Quantity : 1 Set of 9pcs. is. This item, Length is 100 mm and somewhat longer and easy to use.
In the opened state, the root is hard and the Thickness Gauge is difficult to put in and out. First of all, applying Oil or a rust preventive penetrating agent etc. to this root part makes it possible to rotate the thrusul and the Thickness Gauge, making it easier to use. 【Made in Japan】 I feel reliable!
View detail
For Bore up incorporation
I bought it myself even though my friend had the same item and I borrowed it over and over but indeed it w
Because I got the Engine burning GRAND AXIS, I thought that I will try to Bore up while repairing it
Although I was using it even at work, I can use it for quite a while if I buy it once, and 1 pc. There is no loss
Besides Engine, if it is a Scooter, you can use it even when Crankcase Cover's Gasket remains halfway
If you have full Pull Jet oiler together, put Oil in there and it is easy to use
View detail
I am handy ♪
I bought it because it can store small parts that are deeply received and will not catch on Magnet. Actually using it, it is very helpful to keep parts not sticking. Color is also beautiful Red so it looks nice. View detail
I am handy ♪
If you do not use it by multiplying Width of commonly used Size, we will fold the Holder part and it will not get in the way. There is KTCLogo which looks great and it is cool. It is very useful. View detail
Washing without water
I am trying not to wash cars with water except when it is dirty..
Regarding Cowl, it is Polished if you wipe regularly with Kore..
Wax performance is of course good, but the place I think is the best "Thickness of the fabric" Is not it?.
Even with uneven parts, you can wipe to Beauty without Stress.
Also, since it is a Large format type, it can be used for a considerable area by folding and using it.
It is a 750 one-wheeled vehicle, but I was able to wipe it all along with Body → Frame → Wheel → lower.
View detail
Emergency use - It is very good for carrying.
I bought it for carrying at the time of Touring.
It is really Large strange to raise the air pressure to the specified value with Pump of hand-pushed, so at least we chose a shape that can be pressed with weight.
I actually tried it because of test, but as long as the time on hard ground air enters.
It was much easier than using it in my hands.
It can be stored very small, so it is convenient to carry.
Emergency use - I think that it is very good for carrying.
View detail
It is necessary for Maintenance
I used Tie Wrap to lock the foil,
Purchase because it discards each time because it is unworthy of purchase.
It is easy to install, removable, easy to use with One-touch.
It is plenty of weakness that I did not even know that such a product exists
If I am a self-maintenance faction, I think that it is a product that is not damaged by buying it.
I guess it's a bit expensive (haha)
View detail
It is cheap, but it is high quality
I bought it for shipping fee adjustment
This Washer was used in the last Oil exchange, and it was removed with this Oil exchange this time
Washer stuck to Crankcase (Lol)
It is a result that it crushed well because there is a thickness
Of course there was no problem such as Oil leakage
If it is thick enough, it does not have to be exchanged every time
It is cheap, but it is a reliable product in terms of quality
View detail
Various usage
When replacing Brake fluid, I bought it for sucking up the deteriorated Fluid accumulated in the tank using a dropper. I thought that if I replace it with suction, I will be able to stay at the Smallest limit when using a new product Fluid for degraded Fluid
Quantity : 2pc purchase, one for Brake - One purchased for ClutchOil.
View detail
Convenient without stickiness of the nori
As Self Fuser Tape stretches, Rubber sticks together.
Therefore, there is no solid stickiness at all.
Moreover, the adhesive force is also strong, and it seems that it will not peel easily easily.
It is saved because it uses it for Wiring of Off-road motorcycle.
View detail
I can go without it, but it is convenient if there is any
Until now I was using Measuring Cup, but I bought it.
I think that there is only Fork oil position as measurement of the amount of oil in the maintenance of the motorcycle, so I think that it is slightly expensive to think only for that.
I think that things are well done.
Although it is not in the photograph, it comes with a removable pedestal and it is properly self-sustaining, and the thing that makes me glad is Cap with effective for invasion of Dust at the time of storage.
Although I do not understand the precision of the scale well, in the case of Fork oil finally the amount of oil level adjustment is finally eliminated, so there was no particular problem.
View detail
To accompany Maintenace Stand.
There are various things that can be used as substitutes,
Purchasing Jtrip recommended this time using Jtrip's Rear stand, it seems that the frequency of use is likely to increase.
As Lever is slightly farther away, it may be necessary to adjust the Lever side at the limit as it is to hang it, depending on the person every time.
As a Zvorra, it is complainable that it can be adjusted a little more widely, but it is firmly fixed and fulfills the role.
Recommendation for those who frequently apply MaintenanceSTAND at home.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50, HONDA monkey, HONDA Super Cub 50, HONDA dachshund, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT, HONDA jazz, HONDA magna fifty, HONDA Monkey BAJA, HONDA Monkey R, HONDA Monkey RT
Reliable with OEM equivalent
Exchange the bellows SOLO IN port when processing it.
Because it is called OEM equivalent or ARAI made, it is not OEM itself.
I do not have the stock of OEM Parts Number anywhere, so I'm happy with POSH that I get.
View detail