Reviews
For Motorcycle commuting to school
Purchased for Motorcycle to use to get to school in the rain. Never used.
Tools are not objects, so the molding is what it is.
View detail
The ordinary Binding Tape
[How is it used?
Used for maintenance of Harness.
Was the one you received as per Image?
The product is exactly as shown in the picture.
How was your experience with it?
It is easy to use because it can be used just like regular Vinyl Tape.
[Points to note]
Not particularly
How did it compare to other products?
Do not use Vinyl Tape to tie them together.
View detail
Prepare just in case
We prepared just in case this was the first time we had to replace a Tire. View detail
Vertical Brush for tapping
As the title suggests, Brush is used by tapping vertically.
It does not slide sideways like the Tooth Brush, so it is useful for washing the corners of parts that are deep inside the machine.
Brush is not soft bristles, but rather a line of very thick nylon bristles with a diameter of 1mm or more.
Therefore, if you use it on painted surfaces, you will get Wound all over the place, so be careful if you are nervous!
For example, if you try to use it to clean the joint between the Rim and Spoke of the Wheel, which is folded at 90-degrees and cannot be cleaned well with a normal Brush, it is a great Brush shape, but the Wheel's paint will be covered with Wound.
To begin with, this Brush is used to wash Gold attribute Parts such as Engine.
The original brush was used by Mechanic to wash engine parts on the wash stand, and it is a brush to wash off the very dirty and blackened Gold parts with engine oil while pouring washing oil. Please do not make this mistake.
Conversely, if you want to wash dirty gold, use Number One, and even in areas that are deep and difficult to polish, you can clean and wash away the dirt by hitting it with Brush as if you were stabbing it.
While ordinary Brush (e.g., Tooth Brush) is easier to clean on flat areas that are easily accessible and visible, this Brush has a monopoly on areas where the Tooth Brush does not hit well.
Vertical TypeBrush is also available from otherManufacturers, but DAYTONA's Brush may be characterized by the shorter length of the side bristles.
For my own use only for vertical tapping, I prefer the bristles to be aligned all the way to the tip, but for general use with horizontal slides to clean the surrounding area together, the shorter bristles on the sides may be useful.
It is good that the hair does not fall out easily, unlike very cheap inferior products.
The material of the bristles is Nylon, so it cannot be used with solvents such as Thinneret (it will melt). (It will melt).
View detail
Excellent product . Able to adjust size by removing nozzle to adapt to different size of opening . Highly recommend. View detail
Micro fiber
I bought this Micro fiber for Wax and cleaning.
It is reasonably priced and not bad in terms of Size.
For this price, it is sufficient for everyday use and some use.
I would purchase Repeat again for any order.
View detail
I have to have this one, that's the decisive factor.
I don't see much difference between flicking it with a regular wet Towel and Large. I thought it would give me some kind of special shine, but it didn't, so I'm giving it a lower star.
Prior to that, Off-road
Helmet is not so surprisingly dirty unless you run frequently,
View detail
Areas that are out of reach are also OK!
The gap of about 1 pc of finger can be inserted with room to spare, and places that are hard to reach, such as the reverse side of the wheel of a tire, can be cleaned.
The ends of the hair are soft and do not seem to be damaged.
Bubbles and dirt will ricochet off the floor, so dress for work even if you don't mind getting dirty.
View detail
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
I use it a lot.
It is used quite often when disassembling the engine, using the Gasket Case, or removing covers. We recommend the purchase of polishing oil at the same time. (I went to Homsen to buy mine.) View detail
Easy to use
Easy to use for Spring View detail
Super Small TypeNEWOilerbyLargeSawa WAX
This time, Bell Hammer, which was purchased at the same time, was used as the chain's Quantity:I was looking for an oiler that I could use in a small space because I refuel every 1 p.c. I found this product and purchased it.
Although the volume is only 30 ml, it is compact and easy to use in small spaces, and it can be applied precisely one drop at a time, making it perfect for use in small spaces. It is also convenient and perfect for storage with bracket.
View detail
Thick copper
I usually buy in bulk, but I had to adjust for shipping costs.
I prefer copper to Aluminum.
It is quite thick. It may not need to be this thick.
I replace them every time, so it is easy to purchase.
View detail
For protection.
I was concerned about scratches on the Exhaust System part and wanted something good to protect it, so I bought this to try it out.
↓The product information listed, is it true? I don't think it's thick, 1m, 50μ, but it's not thick at all.
With a heat resistance temperature of 310°C, it has strong adhesive strength at high temperatures, and its thickness as Tape makes it ideal as an auxiliary material for Muffler pate and VantageRepair. It also has excellent weather resistance and aging resistance.
I would like to see how it looks for a while, hoping for heat resistance and adhesion.
View detail
To finish the Clutch cover
It did the job well for the price, and the CHALYCHALY feel was pleasant to the touch. If I had to say something, I think it would be very nice if there was some kind of shape within the rectangle so that it could be used for both detailed and wide areas, like a convex or L-shape. The seal remnants around the cover were removed after the Scraper was used, but I was able to remove them. View detail
Maintenance
I purchased this product for maintenance of Clutch Wire. View detail
Used when changing oil in BULLET's Heritage 125
I used this for the first oil change on my Heritage125 (a rip off of the old DAX) made in Belgium by BULLET. I mean, I don't have a service manual, so I'm not sure if I want to replace it with OEM or something else, so I'm thinking of DAX70.
Is the original DrainCook packing copper to your liking? I could have used Aluminum separately, but I'm not sure what the difference is, and it's the same price …. Well, I tried it out. It works fine, so I guess it's OK.
View detail
Cheap and good.
I usually use OEM Products, but since they are disposable, I decided to go with something inexpensive.
The quality is fine and I think I will Repeat until I find something else cheaper.
View detail
ข้อต่อคุภาพดีสวยงาม ใช้งานง่าย View detail