Reviews
Battery brush
I had never heard of a product called Battery brush and the price was reasonable, so I bought it to try it out.
It is surprisingly more usable than I had imagined.
Brush can be used outside of the Battery terminal with good hardness.
I would like to use it for a while and buy more.
View detail
Car wash sheet before driving!
While visually inspecting each part, the motorcycle was sprayed up with Car Wash sheet to clean it up! It's easy to use, but it's also good to get a glossy finish. It is more shiny than normal car wash sheet. View detail
Generally the same as Velcro, Inc.
Used to fix ETCUnit attached to VTR-SP.
I was using the extra Velcro from Velcro that originally came with Power commander 5, but it was coming off due to lack of area, so I used an additional Emon product.
The performance of the Magic tape was not inferior to that of the Magic tape, and it was firmly fixed in place.
It is a little looser than Velcro, but Velcro is too strong to begin with, so it is just right.
The performance of the double-sided tape section is generally about the same or slightly stronger.
Velcro is a USA product, and the double-sided portion is strong, but this product from Emon also sticks firmly.
This area is very different from the cheap 100s.
However, the double-sided portion is quite weak once it is peeled off, so it is a one-shot deal and requires careful positioning.
There is no Negative in particular, but if I had to say, I would say that a little more quantity would be nice.
But since the original Velcro is sold in American style with the smallest length being 46cm, and the price is a little expensive in Japan, it would be more convenient to sell it in a cut-off size with a length and price like Emon's.
View detail
Is it working?
It is normal for dark-colored cars to be uneven.
Image. "No coating of any kind has been applied. We are trying it out on a Back car.
It feels like oil to the touch! I wonder if it is working? I wonder if it works.
It is not so glossy, though.
Car Wash sheetkRangeng is more effective, I feel.
The video is FZr MEETING 2023.
View detail
non-greasy
Vinyl tape is fine, but vinyl tape makes the Cable sticky, so this Binding Tape is used.
It can be used for a variety of purposes, such as cable bundling or at the end of a Colgate Tube.
View detail
To Grip's Wiring
Used for Wiring for Grip.
1.It was Large sturdy enough for 5 times, so even if I made a mistake such as over-tightening and cutting it.
View detail
Compact
Small size is a little bit difficult to use for the Crank Case Cover.
This, in combination with seal peeling, is helpful because the work can be done rather quickly.
View detail
OffIt would be nice to put Oil on the Filter of the car.
[How is it used?
I bought the special product because it was too much trouble to apply oil to the filter on my off-car.
The wonderful thing about this product is that the oil can be reused. If you store a certain amount of oil, you can use the extra for the next time. If you close the lid, you can prevent smells, etc., and if you happen to knock it over, it won't get dirty, which is a Large Merit.
View detail
Trigger for FW1 only
F-dub one I think it is essential to use this Trigger because it is difficult to use without it. View detail
Easy to use
I used this for wiring the USB power supply, and the red wire of DAYTONA stands out, so I used the Wiring Tube and this as a blindfold.
Easier to use than Vinyl Tape because it can be torn off by hand, and easier to bundle and protect wiring that might rub against it. And it looks better, too!
View detail
"Japan" No glue residue after peeling off.
It is used to fix PPMaterial and slippery PlasticMaterial, which are not common in Motorcycle.
Don't expect too much, though. It's much better than nothing." Therefore, we are actively using it.
At any rate, it is inexpensive and I strongly recommend using it on a trial basis!
View detail
Made of high quality Stainless steel!
It is easy to use because it is expensive and the Tray section is thick and quite stable (heavy in weight).
Stainless steel is good… expensive but lol.
The Week Point is that the Magnet on the back of the Tray came off (fixed with glue) … It's expensive, so please make it more durable lol.
View detail
Definitely useful Goods, couldn't get them all in 100's of dollars!
I thought about whether something similar could be done with 100s of dollars, but in the end it is a dedicated product. It did not come true.
However, at first I didn't quite understand how to use it, and the pictures convinced me SIDE. I was not sure how to use it at first, but after seeing the picture, I was SIDE convinced. Please note, everyone, that at first I did not know how to use the Hook. Wrong." They were hanging....
I was quite lazy and my hands were slow, so Caliper was often in a state of limbo.
It is inevitably necessary to hang it up for maintenance, especially for Caliper rubbing and around the Stem.
As it is, it looks bad for the Hose, especially the opposing 4-pods, which are heavy.
We have purchased this car due to the increase in the number of cars.
Although the cost...may be a factor, we are sure that you will be more satisfied than if you had made it yourself using products from 100-yen stores.
It's well thought out.
Also, even when Caliper is not being touched during maintenance, tools can be hung temporarily, nut storage, etc. Vinyl bag." It can be used as a substitute.
It's convenient
View detail
Size feeling, good effect
I used CRC over it instead of Engine oil. It soaks in quickly, so use it after pouring more oil. It is effective in removing Gasket marks, etc., and the size was just right. View detail
Easy to use with no deflection
When receiving, shifting, and lifting the Oil, there is no deflection and no problem in use.
However, cleaning the container after transferring the waste oil has become a hassle, so the number of times it has been used in recent years has decreased considerably.
View detail
Good feeling
I'm glad I was able to reuse the OEMSeat, even though it's pointless to use the wasted hole, but since I'm removing the OEMRubber from the Seat, it would have been nice to be able to attach the Rubber to the wasted hole anyway. View detail
Good for cleaning bikes
There's a lot to clean up in the garage. I don't have much experience with silicone accessories and am aware of the benefits and drawbacks and pretty much knew what I was doing when it came to ordering them. Pros: 1) I keep the water at 70 degrees and I can keep my hands in it. These gloves are much thicker than the latex kitchen gloves you can buy at the grocery store, and hot water is not a problem. 2) Tired of smelly sponges when washing parts with a sponge. With these gloves, you don't have to worry, they rinse and dry almost instantly. 3) No way the soft silicone cleaners on fingers and palms will scratch anything delicate. 4) It's really easy to clean and rinse the sink after washing the parts with these gloves. 5) Although easier to put on than latex or plastic gloves, I made it even easier by occasionally dusting the inside with unscented talc. 6)Long lasting and really durable View detail
That would be handy
Bracket used to stop Wiring, 1Quantity:Set contains 8 pieces.
I often use it for in-house Wiring of cars and I also use it for Motorcycle as you can see in the picture.
Thin Wiring is fine, but thick Wiring is not very suitable.
The clasp is made of soft gold, but this means that it is easy to open, and if you hold Wiring from below, it will eventually loosen.
If the Bracket is placed in a direction that does not require any force to open it, there should be no problem.
The adhesion of the double-sided tape is neither good nor bad.
If you apply it with a good surface preparation, it will hold up reasonably well.
It is a useful tool that is easy to use.
View detail
A must for Valve clearance
I purchased this for Valve clearance adjustment.
The part requiring Thickness Gauge is essential because it is not possible to measure it with other measuring tools such as Caliperetc.
Kowa Seiki is a company that I had not heard much about, but it is a very long-established tool manufacturer established in 1952, and it seems to be a company that manufactures not hand tools that we ordinary users use, but special tools and equipment that motorcycle and automobile factories install as equipment. It seems to be a company that manufactures not hand tools for us ordinary users, but special tools and equipment that are installed as equipment in motorcycle and automobile factories.
Unlike Dial gauge and Micro meter, Thickness Gauge does not deviate so much.
However, if rusting occurs, the thickness can easily change with rust, so only that point should be noted.
Since it is not a tool that is used so routinely, it is better to store it in Vinyl after use with a rust inhibitor, or if not available, a lubricant smeared all over it.
It has been about 10 years since I purchased it and it still remains rust-free.
View detail