Reviews
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
To Grip's Wiring
Used for Wiring for Grip.
1.It was Large sturdy enough for 5 times, so even if I made a mistake such as over-tightening and cutting it.
View detail
DRC for peace of mind, even if it's 100s of dollars.
I could use a 100-yen wire, but I feel comfortable with the Brand name here. In fact, it was easy to use when processing Grip's Wire, so I don't have any problem with it. I think it is very good stuff. View detail
Rubber grip on Wiring!
As expected from a specialized product, it is quite strong even though it is thin. If it were a common product, it would likely break when twisted, but there was no such concern with this product. View detail
It is used for wiring at the time of grip exchange. Unite with other shoppings.
It is used for wiring at the time of grip exchange.
Unite with other shoppings.
View detail
ใช้งานได้จริง ติดตั้งกับตัวรถแล้วสวยงานครับ View detail
Fixed
Used for fixing and clamping when replacing the grips.
It is fine, long, and reasonably priced.
View detail
Grip Fixing
It is used in conjunction with Grip replacement.
The price is reasonable and the length of the product is good for fixing.
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
It's solid
At first, I thought it was a bit expensive for just a Case, but I think it was a good purchase because the Plug tip can be firmly fixed so that it does not come into contact with the Plug, and the body is sturdy so that it can be used for off-road falls. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Storage & Protection of Plug
[How is it used?
I'm playing Enduro with my 2nd car, which is more Hard.
If Setting is out, it is true that Plug does not CUB, but because it is possible to CUB when it runs in a strange place without being able to open it too much with delicate Setting, it is running with Plug in CamelBag.
You can carry the box around with you, but it often falls into the stream or the condensation from the ice in the CamelBag ruins the box, so I keep it in this storage container.
Was the one you received as per Image?
As per Image
How was your experience with it?
It's really nice that the box doesn't crush or get soggy, and it protects the Gap.
[Points to note]
It is a pity that sometimes Terminal remains in Body when Terminal is paired separately.
How did it compare to other products?
This was the only one in stock, so I went with this one.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
KTC's Plug Wrench Short (https://www.webike.net/sd/20024621/) This and Quantity:Set is the 2nd ride, buy it for nowQuantity:Set, I think.
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Nice product to keep a spare spark plug in my tool roll. It should keep a spark plug free of dirt and moisture with no problem. View detail
Fits: HUSQVARNA TE450, KAWASAKI KLX110, HONDA XR50 MOTARD, HUSQVARNA TE250, HONDA CRF150R, HONDA XR250MOTARD, HONDA XR250, APRILIA RXV450, YAMAHA YZ450F, YAMAHA WR250X, YAMAHA YZ250F, YAMAHA WR450F, YAMAHA WR250R, YAMAHA WR250F, YAMAHA TT-R50E, SUZUKI RM-Z450, YAMAHA TT-R125LW, SUZUKI RM-Z250, SUZUKI DR-Z400S, KTM 450SX-F
Isn't the Plug box fragile?
When it is riding on the Motorcycle of Single plug, it is Out when it lets you wear Plug.
I always keep a spare Plug on hand for such a case, but when I put the whole box in the tool box, etc., there have been many times until now that the box has been crushed when I use it.
It is often the case that the inside is Large sturdy, but when I was always concerned, I discovered this commodity of DRC, and bought it immediately. high Plug of Windshield IRIDIUM etc. is sold with the sturdy Case of plastic one by one, and there is no worry, but Plug of the normal goods is Case of paper. At the time of touring, I think that it is convenient also when carrying the spare Plug.
View detail
C302
It is Large strange to put Air into Tire with a tired body.
But with this one, it's rather easy to get in.
It'll take about 100 hits to get about 0.5 in.
At first it felt a little large, but once it's in the bag it's large and sturdy.
View detail
Pretty good
This is a replacement for KIJIMA's Mobile Inflator.
It looks like there is no difference in the size of the large size when compared with the photos, but the KIJIMA-made tube and the large T Type Handlebar are not easy to fit in the side bag, and it was very stressful. The performance as an Inflator is so-so, but it is just a portable Inflator for emergency use, so it is acceptable. I think it's within.
View detail
Standard Wire
It is used to install the KIJIMA MX Grip on the CRF150R?
It is inexpensive and reliable with no rust or breakage in use. It's a good thinness that makes it easy to install and you won't feel any discomfort in your hand when you grip it.
You can also use it as needle gold in the unlikely event of a Motorcycle or other Repair, so you might want to keep it in your toolbox or TouringMotorcycle. It's a good idea to keep it in your toolbox or Touring Motorcycle.
View detail
It works fine
It is necessary to pump several times to fill with air because it is Small size, but it can be used with no problem. View detail
good
I used KIJIMA Grip bond before, but it cured too fast and I had trouble with it There was a
The wire can be attached and removed at any time
It was the minimum length needed and was cosmetically sound
There is no problem with the quality
View detail
A simple refill is sufficient
I bought it for adjusting the air pressure in my Tire
A simple replenishment is sufficient
If you want to put air in the Large amount, it is Large strange because it is a large amount of work
No problem for home use
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Absolutely Recommendation for Plug Mobile!
Pist mobile was essential as it was two stroke and was not good. In a car box with the paper box at the time of purchase, it is always messed up. I wanted to meet soon. (Lol ) Currently it is well maintained and there is no need for carrying I think that it is a recommendation goods for on-vehicle mounting and insurance. View detail
Good product as Inflator's tool
It can be used sufficiently as Inflator's tool.
It is firm and easy to use for the price.
It is convenient to carry because Large is also Compact.
View detail