Reviews
I couldn't use it well.
I bought this tool because I am not good at putting the piston through the cylinder when assembling the engine of MONKEY. However, I could assemble the engine better by hand without using the tool, probably due to my lack of skill. View detail
Thick copper
I usually buy in bulk, but I had to adjust for shipping costs.
I prefer copper to Aluminum.
It is quite thick. It may not need to be this thick.
I replace them every time, so it is easy to purchase.
View detail
Used when changing oil in BULLET's Heritage 125
I used this for the first oil change on my Heritage125 (a rip off of the old DAX) made in Belgium by BULLET. I mean, I don't have a service manual, so I'm not sure if I want to replace it with OEM or something else, so I'm thinking of DAX70.
Is the original DrainCook packing copper to your liking? I could have used Aluminum separately, but I'm not sure what the difference is, and it's the same price …. Well, I tried it out. It works fine, so I guess it's OK.
View detail
Cheap and good.
I usually use OEM Products, but since they are disposable, I decided to go with something inexpensive.
The quality is fine and I think I will Repeat until I find something else cheaper.
View detail
No Color inferior to OEM Product
The OEM Product was out of stock, so I bought this one instead, which is compatible with it.
I changed it together with the drain bolt to match the oil change, and had no problem at all installing it, and I thought it would be no problem at all here if the OEM Product was not available.
The only drawback is that the bag is difficult to open.
View detail
Stable products
Stable product. Good quality. View detail
Used for Clutch Cable!
Used for Clutch Cable of GB250 CLUBMAN.
I used an injector because the lubricant would fly out if injected as is. The GB250 CLUBMAN is not a heavy clutch, but it feels smoother. If you have an old car and the clutch is heavy, I recommend you to use Injector because the lubricant will spread to the whole Cable.
View detail
It's cheap and easy to use. But …
Cheap and easy to use.
But to be honest, it is not essential, because it can be inserted by hand without it.
I bought it, but it became a hassle to use it, so I had to put it in by hand.
View detail
Is good
It is a 2mm thick Drain Washer, so it is good in thickness.
The drain bolt can be tightened securely and prevents oil leakage.
The quality is the same as OEM, so you can use it with confidence.
View detail
The difference between having it and not having it.
I bought this for wire lubrication.
You can spray it on as it is, but it will make your hands dirty. It is a jig to spray lubricant between Wire's Thailand core.
good point
The wire can be lubricated with the appropriate amount of lubricant.
It can be used for any type of wire.
It is very cost effective.
A bad point
It will get dirty at least a little.
It may get your hands a little dirty, but there is a big difference between having it and not having it, and there is no harm in having it if you do your own maintenance.
View detail
Used for SV650 VP55B
This is the same Size as the OEM VP55B model on my 2020 SV650. I bought it here because I can't find the thick packing locally. I think it's better to buy them in bulk and replace them as soon as you replace the oil. View detail
To VTR250
This Drain Washer is as thick as OEM.Quantity:1 Set of 2pcs. so you can use it in the next Oil replacement. View detail
You can use it.
First time I've used it.
It seems like a lie that it used to take me about 30 minutes to push it in with my fingers.
The instruction manual is not included, so the first time user may fit it upside down.
That's the only thing you need to pay attention to.
In case you're wondering, Piston diameter is Φ79.
View detail
Except for the fact that it is made of copper, it is a very common Washer.
Material:I bought it because it was slightly cheaper than Aluminum.
It's a normal drain washer, no oil leaks, and it works great.
Since the engine is blacked out, I thought it would be a good color to add, but since it is a part that is attached to the bottom of the engine … (lol)
View detail
The thickness is solid.
It is a 2mm thick drain washer to tighten the drain bolt and prevent oil leakage.:1 Set of 2pcs. is very helpful. The quality is no different from OEM. View detail
We don't sell them locally.
I changed it for oil change, locally we call it Thickness:I bought this at the same time as I bought the Filter from We-Big, because I was afraid that the 1mm packing might damage the drain bolt holes. View detail
It works normally
Since the price of the Honda OEM Product went up, it was changed to this one for the same price per unit.
1.Compared to the 5mm thick OEM Product AluminumPacking, there is only 1/5th of the crushing feeling, so I was worried.
View detail
It's not a problem
MINIMOTOMinimotoThe MinimotoPiston ring compressor has arrived, so I'm going to give it to you I'd like to give you a quick in-play of how it feels to use it
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
periodic replacement
Price and Quantity:1 Set of 2pcs It is purchased with other products on Oilfor Replacement
It's a consumable product and that's enough
View detail
Required for oil changes
I have used Drain with both KIJIMA and OEM and it worked fine
There are a lot of aluminum packings, so copper is very rare
I recommend it for a good price
Aluminum is too crushed and can get caught in the Bolt
I don't really want to use it, personally
You can use one piece twice if you don't squeeze it with Overtorque
View detail