Reviews
Fits: HARLEY-DAVIDSON 1/2-inchesHose compatible
Used for Repair!
I replaced it because it was rusty and shabby; I've been using it for about a year now and I'm happy with it, especially since it hasn't rusted. View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Good and close to OEM. Would buy again.
Good and close to OEM. Would buy again. View detail
It is soft and easy to use.
It is a little thicker than Kawasaki OEM parts, but I felt no discomfort in wearing it. The length is different between No.1 and No.4. View detail
Convenient to have
I bought Repeat because I lost it when I caught it on a tree while driving in Woods. There are short ones that do not use the Stem hole, but I use this one because I do not have to worry about where to put the cap when refueling and it does not get dirty. View detail
Super fuel hose set I.D.Φ3×1m
Used for carburetor overflow hose
I bought Pink last time but 1m was not enough so I bought more.
I decided to use a two-tone color anyway, so I went with Green this time. It is now easier to visually inspect each cylinder.
Now we can also verify which one is more durable. v
Compared to Pink, which is squishy and easy to handle, Large is harder. It is almost as hard as a normal Vinyl type.
Pink is easier to handle (it is soft and stretchy, so you can get a little bit of mouthfuls in the SizeOver area), but either is fine for Overflow.
Green is recommended for use in areas with tight bends, where the pipe is not easily crushed.
As a side note, I always reserve KITACO's Package (plastic) because of the above etc.
It can be used to make a washer for the gap between the clutch lever and holder when there is more play between the clutch lever and holder, or to make a collar to prevent sticking between the accelerator grip and switch holder. And it's free.
View detail
Super fuel hose set 991-0311000
Used for Carburetor lower overflow hose.
This is the case in the Parts List. (mk? was it?) I thought the inner diameter was 3.5mm, but the alternatives from Company P and Company D were also 3mm, and KITACO did not have half as many, so I bought 3mm. KITACO also did not have a half-decent number, so I bought the 3.5mm. I bought a 3.5mm diameter pipe because it is soft and easy to use.
I liked the Pink color, although the slightly firmer Green would be better for Flow Hose.
When I tried to replace it, I discovered the problem:1m is Quantity.:I can only take 2pcs.
Plans to reorder. I'll have to write another tiresome impresario. I have no time to be poor.
Should we try a Pink/Green two-tone color at this point?
View detail
Oil hose replacement
Oil hose cracked and replaced. View detail
Fuel Hose
CRM's Fuel Hose was cracked and was replaced. View detail
Satisfied
Good cost with 3 different sizes View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Fuel line, this is the only choice.
Don't use hose, which is quickly altered by UV light, heat, and fuel, and should be replaced when it leaves a clear mark on the clamp. It is still convenient, although there are few opportunities for immediate delivery at Webig due to the spec. on the order. View detail
![[Motoforce]CollarFuel Hose](https://img.webike-cdn.net/catalogue/images/93333/07162058_60f17470d00f2_TS.jpg)
Cute! That's all!
Durability is unknown as time has not yet passed. The color is cute. Nothing more, nothing less. View detail
carrying out workability good by moderate softness -- it is
carrying out workability good by moderate softness -- it is View detail
Purchased for Restore for my old car.
The OEM parts were missing, so we used the alternative parts, but we are satisfied with the included clips. View detail
I utilized it on my old car!
The Hose Band was also included, which was a big help to us. View detail
First GSHose replacement in 7 years
The Fuel Hose of GB250 CLUBMAN has deteriorated and we decided to replace it.
We all know that regular replacement is a must, but we keep putting it off...!
I think this product is kind because it comes with a hose clip. I feel more satisfied with the elasticity of the new one than with the rigid and deteriorated one.
I know that deterioration of Rubber is inevitable, but since it is a double-layered structure, I expect it to be durable.
View detail
As per Spec. It looks thick and sturdy!
It was used for the modification to organize the tank to filter to carburetor. The outer diameter is as per the spec. and seems to be sturdy, but it is very difficult to handle. The attached fixed clip doesn't work at all. Even if it was made by another company, it wouldn't work. (Lol) View detail
Easy to use
The ZOOMER OEM fuel hose has a 4.5mm inner diameter, so I could not find the same system in Other Brand Products. I used this product and a conversion joint to install it. The product is inexpensive and easy to purchase, but it is difficult to know if the installation is good or bad without actually assembling such a product. View detail
Easy to use
It has moderate flexibility and is easy to use. I've used it on old Breeder, Fuel Hose, etc.
The translucent design made it easy to check the condition of the inside.
View detail