Reviews
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
cheapness is the name of the game
I think it is possible to find OEM parts, but the Breather Hose 650mm 6mm Diameter from the rear of the crankcase of CUB series engines was out of stock, so I substituted it with this one of the same size.
I don't want to be speculative, but this Hose in a different Size was falling apart after a year, so it might be better to buy it if you want it for now with the intention of replacing it frequently.
View detail
May be easy to loosen.
I bought it because it is a Pressure Resistant, Oil Resistant Hose.
Leather mesh inevitably tends to unravel at the edges.
Well, that is acceptable.
The problem is that the inside Hose might be easy to loosen.
I used Oil Resistant Hose from KIJIMA or DAYTONA without Clamp and it never came loose.
I wonder if that is Minus.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
Used for Z750four
I purchased this to change the location of the Overflow hose that was previously attached.
I had previously purchased and installed a PMC one, but it seemed somewhat thin and meager in comparison.
There are no problems with installation or use.
The price is low, so this is sufficient for those who only need it for the time being.
The look and texture was not great.
I thought PMC's would be next.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail
I'd like to see more detailed Specifications.
Used for Repair of Fuel Hose of LIVE DIO.
Description. Its double-layer construction makes it highly resistant to oil." I would like to see other specifications written in detail, since it is a Fuel Hose, so it is natural that it has excellent oil resistance.
The DAYTONA's hose says "Inside:00, outside:△ △ △, heat resistant temperature:? The temperature resistance is 0.5 to 1 degree Celsius.
I'm not saying that NTB's stuff is bad, but it would be easier for buyers to choose if you wrote down the details.
I chose NTB because they had a good size, price, and reliability.
Maybe this will be Large sturdy until I let it go.
View detail
Since durability is from now, it cannot say anything, but it is somehow good touch!
Since durability is from now, it cannot say anything, but it is somehow good touch! View detail
I don't recommend passing fuel through it.
Instead of passing fuel through it, it is used as a Protective Tube to prevent damage to the surrounding area during wiring by passing twisted Stainless Steel Wire inside.
I often use this hose to hold small parts without letting fuel pass through, such as putting it under a battery to hold the terminal nut.
It is convenient to use together with Tie Wrap and Wire & may be self-satisfying for those who prefer this kind of Racer-like finish.
View detail
Easy to use
I use it to bleed air out of brake fluid and it is very convenient.
The length is 1 meter, so it can be cut to any length, making it easy to use.
I like that it is transparent so I can see what is inside.
View detail
Is good
It stops Gasoline from dripping from the hose that has been removed from the Fuel tank.
Three types of plugs are conveniently available to match the Large size of the hose.
View detail
good
The texture is good. It is stretchy and not troubling performance as Hose.
In my case, I did not use it as Oil Resistant Hose, but I wanted to prevent scratches on the wiring part, so I used it as a tube through the wiring. In this way, it prevents scratches and makes it look a little better.
View detail
OEM same etc.
Please note that the inside/outside diameters are shown in different sizes.
This is Universal's fuel hose and it looks just like the OEM one. The usual translucent pink hose will break into pieces after 6 months of exposure to UV and Gasoline, but this one is fine.
The heat resistance was sufficient for my needs and it didn't melt. It is not colorful, but it is enough.
View detail
Rubber is hard.
Fuel Hose has deteriorated and has been replaced.
Made of KevlarMesh?
Therefore, even if the R (R) of the Hose placement is bent a little too steeply, it will still function without collapsing in the Hose.
It's solid for that and is stiff and painful to finger when inserting it into the Fuel Cock.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
subtle
It is soft for a fuel hose, and the accuracy is moderate, but it is so soft that the hose bends in the middle. If the hose is bent, the fuel will stop, so you need to check it from time to time and be careful with the handling. View detail
Oil Resistant Rubber Type Gasoline Hose
Fuel Hose. I don't remember why I bought it. Well, I can use it around Gasoline, so I thought it would be useful if I had it in case of emergency. View detail
It's a bit of a no-brainer, actually.
I used it for the part that connects to the catch tank of the Coolant of WR250X.
The rest is used for the Catch tank from Gas cap.
The color is Green Light instead of the usual Pink, and it's nice to be Accent.
View detail
Fuel Hose Replacement Spare Parts
The XL1200 Fuel Hose has deteriorated a bit, so I measured and purchased the size.
I haven't used the product yet, but considering the price of OEM parts, it's more affordable to buy this one.
View detail
It looks nice ? ? ?
Purchased recommended by acquaintance.
The texture is also good and looks good!
Because it is Hose, there is nothing to worry about the installation.
I used it for Hose of Blowby gas but in about 3 months Crack in Rubber inside ...
I was wondering if I could go on for a while but it came a few days ago www
As I used it for the XL 1200 C SPORTSTER 1200, I think it is about heat and vibration, but 3 months is as soon as possible.
View detail