Reviews
The HorseMaterial is hard.
Material the Tank of WR:When I replaced it with IMS to make it plastic, the Hose on the end of the Cap was too plain, so I bought this one. However, the material of the hose was too hard and came off easily, which was caused by the fact that the cap did not have a shape to prevent it from coming off. I should have used Aron Alpha. View detail
Convenient to have
I bought Repeat because I lost it when I caught it on a tree while driving in Woods. There are short ones that do not use the Stem hole, but I use this one because I do not have to worry about where to put the cap when refueling and it does not get dirty. View detail
To prevent Gasoline leakage in the event of a fall
We are planning to replace the Hose with a Hose with One-Way Valve along with the planned replacement of the Fuel Tank.
I ordered Red, but it is almost Orange lol.
View detail
Soft.
It is soft and easy to handle and use. The price is also cheap, so I can recommend it. View detail
Since the Uni-flow cap is gone.
[How is it used?
I had ZETA's Uni-flow cap (https://www.webike.net/sd/1550633/) glued on, but then I noticed it was gone, so I replaced it with this one. It's sad.
Was the one you received as per Image?
It is just like the Image. But the Hose was about 10 times harder than I expected.
Was the installation difficult?
The Hose is hard, so you have to use a lot of force to get it in.
I hope it's hard to pull off for that.
How was your experience with it?
The Gasoline is going down to the carburetor with no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think it's a good idea to glue this in place as well.
View detail
RZ250R [3HM] I used it for!
RZ250R [3HM] I bought it because I wanted a Hose that I could cut at any length because I use a 3MA Radiator for
I was relieved to see that the Hose looks sturdy.
View detail
I used it to Hose the Reserve tank of my RZ250R!
I used it to Hose the Reserve tank on my RZ250R Radiator.
It's a good and cheap product.
View detail
There is no particular dissatisfaction in terms of quality and performance.
We replaced Fuel hose to attach Filter with Big tank installation.
Hose is also flexible and Size was also Exactly.
View detail
As expected
There are products that use One-Way Valve for these kinds of goods,
In One way, the expanded air inside the tank is not easily discharged and the internal pressure does not decrease.
In comparison, this product knows by blowing Hose slowly in the mouth,
A little air flows through it, and when it blows strongly, it does not pass through being hermetically sealed.
Perhaps I think that suppression of internal pressure rise is suppressed and fuel leakage due to falling etc. is prevented.
My car was a resin tank outside the company so I was worried about the influence of the rise in the internal pressure during the summer,
I'm satisfied with Large meeting the goods you want. I do not care as much as Hose is a bit hard (Lol)
It's also very convenient to use Hose to spin around at Valve.
View detail
Necessary enough
It is a simple part so there is no special Impression, but it can be used without problems as Fuel Hose. However, I do not know about aged deterioration yet. The color is not black, it is somewhat gray. Two Clips are attached. View detail
As expected but a bit hard?
I bought it as Hose of Fuel cap.
Price is not high, Tank shrinking Small - It was deciding that it works in conjunction with inflation and a backflow prevention valve inside it.
It is a pleasant miscalculation to remove Hose as it is without twisting it as it turns when removing the cap.
However, it was harder than expected and I had a bit of trouble walking around Hose.
I am writing a detailed article on my blog
http : / / www. botti-bk. com / entry / 2016 / 07 / 12 / 191254
View detail
cool
I attached it to XR 's Pla Tank, but I think that Hose is more effective than StickerTune. This kind of Hose has a good fluorescent color. Trend Color : Maybe there is Yellow or something ...
I do not care about the price, so I would like to replace it if I deteriorate.
As Hose is hard as other people say with Impre, it is good to push it in the sun when it is warm. Let's be careful when you plug it into Cap as you cold it.
View detail
DRC Fuel Hose 50cm
Since I changed Carburetor, I bought it without fitting Fuel Hose inner diameter.
Materialetc. I do not know, because the years have not passed yet, I feel good..
View detail
[ -- the Webike Monitor ] -- vomit -- vomit -- although purchased in the measure against a Gasoline leak at the time of a fall with a Course, isn't a Hose hard and isn't a position unsatisfactorily stabilized? After equipping, the leak from a G
[ -- the Webike Monitor ]
-- vomit -- vomit -- although purchased in the measure against a Gasoline leak at the time of a fall with a Course, isn't a Hose hard and isn't a position unsatisfactorily stabilized?
After equipping, the leak from a Gasoline cap was lost, but it is an uncontained leak from a carburetor instead.
.
.
View detail