![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Rear Brake Wire](https://img.webike-cdn.net/catalogue/images/61881/09222026_59c4f3515cdcd-450x_TS.jpg)
Cheap.
I was worried until it arrived because it was cheap, but it was a decent thing. (Excuse me....)
Lever Cover is on and Bellows is on.
There seems to be no particular problem.
The other thing is durability, but as expected, I can't give an imprementation (laugh).
View detail
![Stainless Brake Cable (for Standard Holder)](https://img.webike-cdn.net/catalogue/10031/906-1083201_TS.jpg)
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
Product # 906-1083201
There was a need to replace the brake cable on my Honda Monkey. The original cable was damaged. Thanks to KITACO, which took care of us. The replacement was easy, the appearance of the cable is excellent. I had a lot of fun. I definitely recommend it! View detail
![Long Clutch Cable](https://img.webike-cdn.net/catalogue/images/80816/HB6368_001_TS.jpg)
good.
I am a SR400FI user. I purchased it because the length of the clutch cable was tight while using the Hurricane handleset in the past. I have now replaced it with the SR500 genuine up handlebar, but I am using it without exchanging cables. We have a spare for future exchange. ---------------------------------------------------------- SR400FI user. Previously, the clutch cable length was tight while using the hurricane handleset. I am now exchanged with SR500 Genuine Handlebar, but I am using it without a cable exchange. We have extra for future exchange. Powered by Google Translator View detail
![Rear Brake Cable](https://img.webike-cdn.net/catalogue/10031/906-2407300_TS.jpg)
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Even a beginner could exchange it.
[How is it used?
It has already been installed and so far there have been no problems at all.
Was the installation difficult?
I had no problems if I followed the Instruction Manual. It was very easy to replace the old Cable with the new Cable by tying the old Cable to the new Cable with Tie Wrap and pulling.
It was just hard to get the parts that hold the Wire of the ADDRESSV125 off at all.
How was your experience with it?
Brake is now firmly applied.
[Included Parts:were they on?
None
View detail
![Brakes Cable](https://img.webike-cdn.net/catalogue/images/68882/brake2_TS.jpg)
Fits: HONDA Little Cub, HONDA Little Cub 55th Anniversary Special/Little Cub Special (LITTLE CUB 55th Anniversary/LITTLE CUBSPECIAL Knife), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB)
Used for Super Cub custom
It is good because it can be used without any difference from OEM Product and can be purchased at a low price. View detail
![Long Clutch Cable](https://img.webike-cdn.net/catalogue/images/80816/HB6294_001_TS.jpg)
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF
Jet speed delivery+ cool
Fast delivery and good quality... The clutch cable fit my cb 400 vtec perfectly.. Very easy to install.and good quality. View detail
![Long Clutch Cable](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0100/2074074_1_TS.jpg)
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Large is the key to getting around.
I don't see any particular problems.
I incorporated after Bell Hammer lubricant jab jab.
View detail
![Front Brake Cable](https://img.webike-cdn.net/catalogue/images/33864/013010979_01_TS.jpg)
good
I had to put it on because the one I had before was Garbage. The performance was better than the previous one. That's all. View detail
![Stainless Steel Brake Cable](https://img.webike-cdn.net/catalogue/11305/906-1122000_TS.jpg)
I was looking for an Outer length of 1030mm.
I was looking for a short Outer Brake Cable since I shortened the width of the Handlebar.
This is still a little long, but we are satisfied.
I also purchased a KITACOBrake holder, but it cannot be used without some modification.
But as a craft lover, I have no problem with that.
View detail
![Rear Brake Wire](https://img.webike-cdn.net/catalogue/images/61881/09222026_59c4f3515cdcd-450x_TS.jpg)
OEM Equivalent Product for peace of mind!
That's what KN Planning is all about. It is really helpful that they deal with old Motorcycle parts.
It is an OEM Equivalent Product, so there are no quality issues.
It is not worth reviewing. After all, it is an OEM Equivalent Product...nothing special will change.
But dare I say it, the price is low! This is the point.
You may want to apply Wire grease before installation.
Although it felt like grease was applied when I touched it, I think it is probably minimal, so I recommend greasing it up to prolong its life.
View detail
![Brakes Cable](https://img.webike-cdn.net/catalogue/images/68882/brake2_TS.jpg)
Fits: HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
Brake cable
Acquired for HONDA SUPER CUB 50 CUSTOM. Part number BCH-001F, manufacturer NTB. It's time to replace the old brake cable, while the old cable was in working order, but already had rust. When replacing the brake cable with a new one, it became clear that the new one is of excellent quality, it works clearly, so I recommend that everyone change the old cables, despite the fact that the price of the goods is low. Satisfied with the result of the replacement. The cable from this company is fully consistent with the original. It was time to replace the old brake cable, while the old cable was in working condition, but already had rust. When replacing the brake cable with a new one, it became clear that the new one is of excellent quality, works clearly, so I recommend everyone to change the old cables, despite the fact that the price of the product is low. I am satisfied with the result of the replacement. The cable from this company fully corresponds to the original. View detail
![Brakes Cable](https://img.webike-cdn.net/catalogue/images/68882/brake2_TS.jpg)
Can be used for AF16
I bought one for AF24TACT because the one for AF16TACT does not exist.
The overall length is about 1310mm, about 10mm shorter than the AF16 Cable, but it works fine.
View detail
![Long Clutch Cable](https://img.webike-cdn.net/catalogue/images/80816/HB6368_001_TS.jpg)
I'm generally satisfied
It was Exactly on SR500 Replica Handlebar. View detail
![Honda Vertical Engine Dio series Rear Brake Wire](https://img.webike-cdn.net/catalogue/images/31959/04112332_4da310fcd05d4_TS.jpg)
Fits: HONDA Superdio, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Dio (2 Cycles)
Diversion to ZOOK with DJ-1Engine
It was diverted to the ZOOK which was replaced by the Engine of DJ-1.
I think it is a standard custom to put a vertical DIO-type Engine on a ZOOK.
The shape of the front and rear thailand coils matched and the length was fine.
If the brake wire is not carefully routed, it may interfere with the light cowl when it is threaded through the light cowl, preventing the cowl from closing.
In addition, I think it would be a good idea to clean the Arm area of the Brake.
View detail
![Honda Dio Front Brake Wire](https://img.webike-cdn.net/catalogue/images/31959/04112330_4da3106b4db2d_TS.jpg)
Fits: HONDA AF27 AF34 AF18 etc. Dio series, HONDA AF27 AF34 AF18 etc. Dio series
ZOOK (AF26) diverting (e.g. money from a particular field)
Diversion to ZOOK.
I think the things are very well made. I'm really thankful that I can still get new ones and at a low price….
It is about 80mm shorter than the Wire for ZOOK, but I was able to install it without any problem. Some people may need to adjust the angle of Arm.
If you do not check the wire routing carefully, be careful not to interfere with the cowl when passing it through the cowl of the headlight, as the cowl may not close.
While disassembling, it may be a good idea to clean the Arm area of the Brake as well.
View detail
This was a pre-delivery Service.
When I bought the car secondhand, the wire relationship was falling apart and was replaced before delivery, and the dealer used this Manufacturer at that time.
It is OEM compatible rather than external.
The replacement was done at the store.
good point
The performance is comparable to that of OEM products.
If grease up is done properly, it will last for a long time.
I replaced it before delivery and have driven about 30,000 km with no problems at all.
Easy to obtain.
●Lever movement was always good.
BrakeTouch is also gentle and firm.
A bad point
● No dramatic changes are expected.
I honestly don't think that the Levers need a dramatic change.
If the movement of OEM, and the durability of the same etc. as OEM ●
View detail
![Front Brake Cable](https://img.webike-cdn.net/catalogue/images/37814/hb6058m_1-hb6058m_TS.jpg)
I am satisfied.
It was the first time for me to replace the front brake wire on a motorcycle, but it was done without difficulty in about 10 minutes.
I like the color, it looks better than Black.
View detail
![Front Brake Cable (40mm Long)](https://img.webike-cdn.net/catalogue/images/44098/ca1319_TS.jpg)
Touch of Lever has improved.
The NORMAL fork and wheel may be a little too much, but it is much easier to maneuver and touch.
Also, the drum-like part that goes into the lever on the wheel side was not thick enough to fit, so I had to use the previous part to make it fit.
I think I ordered what I saw because it was my first time using the site and I wanted to be sure to check it carefully next time.
View detail
![Stainless Brake Cable (for Standard Holder)](https://img.webike-cdn.net/catalogue/10031/906-1083201_TS.jpg)
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
At Restore
As with the Accelerator Wire, the operation of the wire is not good when a part of the wire is broken, Boots deteriorates and Rust begins to appear, and I have been able to use this product, which seems to be better than OEM, for light operation. View detail
![brake cable](https://global.webike-cdn.net/uiu/impression/202207/21_1021588_62d91d34e8b2c.jpg)
Fits: HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Be careful with older vehicles.
The front brake lever was not returning properly, so the cable was replaced.
Same etc. as OEM Parts, with well-detailed construction.
Brake was also fixed.
good point
Low cost and high quality.
Easy to work with.
High durability.
Cable types weaken with age, so replace them if you think something is wrong.
View detail