Reviews
Anyway, it's cheap!
[How is it used?
NSR250R (MC21) The lamp is used for the Position lamp of the
I was going to buy OEM Parts from the Parts List, but then I saw that it was marked 12V 1.7W. Then let's find something cheaper with the same rating." I searched for this product and found it.
Also, I don't like bright white Lamps that don't suit the year, so I chose this product in a color that looks moderately warm.
Was the one you received as per Image?
The product arrived exactly as shown in the pictures.
Was the installation difficult?
DMR's T10Socket (https://www.webike.net/sd/24603796/) The combination of the two was used.
Replacement is very easy, just stick it in the Socket.
How was your experience with it?
Personally, I found it quite bright.
I think it's a Brush lamp, but I don't usually look directly at the position lamp.
It is inexpensive but completely safe.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
Not particularly
【Review】
Although inexpensive, it emits light quite well.
OEM Product (34902-750-003) was rather expensive, so I think it is a sufficient substitute.
View detail
Flashing Valve
I used it on a Blinker Valve, but it's not painted, it's a Rubber type Film? So it does not blink nicely. View detail
I'm doing my job reasonably well.
I bought this as a consumable for my TLR200. This is a Type bulb, which is not seen anymore, but bought for fitment.
After all, it is dark because there is no illumination, but it is enough.
View detail
It's an ordinary bulb
I used it for the Meter Bulb in the LITTLE CUB (FIMODEL)
It's cheaper than the price of OEM Parts, so use this one when it runs out
It is a Wedge ball with the T5 standard
T5 is very small There is a T5Valve of LED outside of the company, but the meter side has
It may not go in, so if you're looking for an absolute one-shot cure, you'll need to take a shot at it
I think it's a good idea to REPAIR in the Valve sphere to be safe here
If you're going for Custom, you might want to Challenge the T5 LED
View detail
It purchases to Meter-valve exchange.Since the required number was five, it is three-box purchase. One is put on the reserve.visibility is also good and legible.The Manufacturer where the Package is also caring about the Valve by entering
It purchases to Meter-valve exchange.Since the
required number was five, it is three-box purchase.
One is put on the reserve.
visibility is also good and legible.The Manufacturer where the
Package is also caring about the Valve by entering a Sponge is transmitted.
View detail
AWB112 It is 12V / entering two 2W T5 CLEAR wedge bulbs.Although Meter lighting, an Indicator, etc. are made to change fundamentally what came at exchange time to LED,By LED, there are parts still suitable in an electric lamp, such as a part supe
AWB112 It is 12V / entering two 2W T5 CLEAR wedge bulbs.Although
Meter lighting, an Indicator, etc. are made to change fundamentally what came at exchange time to LED,By LED, there are parts still suitable in an electric lamp, such as a part superfluously turned on by leakage current, with a part, water temperature, an Indicator of a CHARGE, etc. which are interlocked with others, such as Tray lighting of the Center console of a car, and are made to turn on faintly by undervoltage.
Although it is T5 ordinary wedge bulb, since there are also red and a green coloring Valve in the Lineup of the company, it is good to be able to choose by the use or liking.
View detail
The Position light of the beef fat light was turned off, and since there was no Yellow Bulb of a Stanley, it purchased here. the Yellow -- rather than -- touch near the color scheme of a NORMAL is better -- ます.
The Position light of the beef fat light was turned off, and since there was no Yellow Bulb of a Stanley, it purchased here.
the
Yellow -- rather than -- touch near the color scheme of a NORMAL is better -- ます.
View detail
The position ball changed into red. Although it became a little doubtful motorcycle, since it becomes red faintly if a headlight is turned on, it is a good touch.
The position ball changed into red. Although it became a little doubtful motorcycle, since it becomes red faintly if a headlight is turned on, it is a good touch. View detail
[webike monitor] They are a wedge ball and red. Since use and a color had faded gradually in the rear side marker of the car, it was searching in a car shop, a home center, etc., but it was not found easily but I was troubled. I am thankful to it
[webike monitor] They are a wedge ball and red.
Since use and a color had faded gradually in the rear side marker of the car, it was searching in a car shop, a home center, etc., but it was not found easily but I was troubled.
I am thankful to it as it is not in play, but it is gratitude at the products offered which can also purchase the goods which generally become difficult to come to hand.
View detail
It was used for the position lamp of GSR-400. Since the blinker lamp was separate, it was made into showy red, but it is cool!!! Atmosphere also changes entirely, and since a price is also cheap, it is easy to challenge other colors. Although I th
It was used for the position lamp of GSR-400.
Since the blinker lamp was separate, it was made into showy red, but it is cool!!! Atmosphere also changes entirely, and since a price is also cheap, it is easy to challenge other colors.
Although I the depth of a color is [ I ] sorry about even free had imagined Dark touch, I am too bright and have become Wright red.
since -- it is star **** individually.
Since the image of its own car is changeable drastically by a single coin, it is quite still a recommend!!
View detail
a [buying motive] -- the speed meter and fuel instrument illumination (the speed meter side diagonal below) of -ZRX1200R (06) went out, [ sake and ] Kawasaki brand-name parts instead This product product number:1PWB123C, correspondence vehicle typ
a [buying motive] -- the speed meter and fuel instrument illumination (the speed meter side diagonal below) of -ZRX1200R (06) went out, [ sake and ]
Kawasaki brand-name parts instead This product product number:1PWB123C,
correspondence vehicle type wide use and one description-of-item ON color: -- clear rated: -- 12v 1.7w drawing number: -- 12-7 wedge / single bulb glass and mouthpiece form: -- T6.5 wedge (special), application and use:meter ball, position ball, and electric lamp number:WB123 was purchased.
[Price] It is somewhat cheaper than a bulb, 12V 1.7W, T6.5 (part number: 92069-1070). [ authentic positive in - kawasaki ]
[Others] Although it was displayed on - package as special T6.5 wedge for yamahas, it operated satisfactorily.
[evaluation of goods] - it is cheap and these good products of availability are four stars.
View detail