Reviews
Stanley LED Bulb Standard
Used for ADDRESS V100
I used it for a tail lamp, but since the valve of the tail lamp of the ADDRESS V100 also serves as a license plate light, I chose a bulb color for the light emission.
Easy to replace as you just replace the Normal valve.
View detail
Light bulbs are also tasteful, though.
We were impressed with the performance of the SUPER CUB 90, which was converted to a battery reply.
Used for 750 MACH Tail in good shape, Brake lever, Pedal running to check.
Compared to before the replacement, it changed from dim to VIGOR.
Strongly RECOMMENDATION for those who drive old or bulb Spec. vehicles.
It will free us from the worry of sudden bulb failure, and will also increase visibility to following vehicles and improve safety.
It will also reduce the burden on Battery.
View detail
LED Bulb with just the right standard color that is not an explosive light.
YAMAHA Used for FZX750 Tail lamp.
I think it is best to use LED bulbs for tail lamps because they emit light instantly instead of the gradual lighting of Halogen bulbs.
The effect of reduced power consumption due to the use of LEDs was also helpful.
The luminescence is a standard color, not the so-called explosive light that LED bulbs tend to emit.
*This is a Repeat purchase for use with TRX850.
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
SUPER CUB110 JA59 and SR400 FE Tail lamp LED
[How is it used?
Tail lamp LED for SUPER CUB110 JA59 and SR400 FE to reduce battery load.
Was the one you received as per Image?
No problem
Was the installation difficult?
Both JA59 and SR have BoltQuantity for Tail lamp Cover.:Easy to use, just remove it with 2pcs and change to LED light.
How was your experience with it?
No problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
LED Bulb for improved visibility!
Replaced with StanleyLEDStandard valve to improve visibility of Stop/Tail.
The deciding factors were that it is made by Stanley Electric, which is also used as an OEM for domestic motorcycles and automobiles, and that it has the Japanese Vehicle Inspection Correspondence and luminous color. (Color) was the light bulb color.
Lumen value when luminous (lm) 370/45lm, Kelvin value (K) The light:2700K, a natural coloring without becoming BlueWhite with the explosive light of so-called LEDs, so it can be casually installed even on older motorcycles.
We also expect that the load on the Battery will be reduced since the power consumption will be lower with a rating of:12/24V 2.8/0.4W.
Compatible Light Bulb Type is S25 BAY15d, so it can be used for most car models.
In my case, I installed it on a TRX850, so I had to remove the Seat Cowl and Tail lens during the installation process, which was a bit time-consuming, but I think the Kill is Large sturdy without any particular need for more work than necessary.
View detail
Great!
I have a SEROW250 with a Grip heater, but when I turn on the Blinker and Stop-lamp with Idling, the voltage sometimes drops below 12v, so I bought it to save power.
Even if Stop-lamp is turned on, the voltage hardly drops and Large succeeds!
This is only for SEROW250, but the Tail lens is really hard to remove, so it is better to remove the Tail Lamp Lamp ASSY and work on it, even if it is troublesome.
Remove the Seat, Number, Rear Fender, and Tail lamp in this order, and you will find a hole through which the Hexagonal Wrench that removes the Tail lens passes.
Working without removing the Tail Lamp Lamp ASSY is impossible to attach the Lens, even if you can manage to remove it!
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA GORILLA, HONDA JOKER90, HONDA JOKER Helmet, HONDA ZOOK, HONDA solo, HONDA DREAM50, HONDA Byte, HONDA MONKEY BAJA, HONDA MONKEY, SUZUKI ADDRESS V100, YAMAHA BWS100(BWS), YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA APRIO, YAMAHA GRAND AXIS, YAMAHA JOG (2Cycle)
ไฟท้ายสีแดงสวยงามใช้งานได้ดี View detail
It's good.
It's hard to tell from the picture, but it's a power-saving, sharp, and reliable License Plate Light made by a famous Japanese manufacturer, so you can use it with confidence.
This product. Expensive!" If you are saying, "I am not sure. I think it is better to buy a high quality Valve from Japan, even if it is expensive, than to buy a cheap, low quality Valve from a certain country and replace it many times, which is definitely better in the total.
View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
1 pc. as spare
I haven't had to replace it in a long time.
Replace with a new one just in case
Well, it's just an ordinary light bulb.
Quantity:1 Set of 2pcs. so the other one is a spare.
View detail
just in case
For use in the car with Phillips Screwdriver for preventing ball breakage while on the road. View detail
For automotive use
It is mounted on board with Phillips Screwdriver as a countermeasure against running out of Valve on the road. View detail
Stable Stanley
We introduced this led by saying Stanley in light bulbs.
The brightness changes as clearly as a light bulb when the Brake is turned on or off.
Then there is durability.
View detail
Savior of old cars
Tail lamp rated 12V23/8W S25 BAY15d StanleyA (BP) Replacement from 4879.
Quite good! Decided to come back here next time!
It is a bit expensive, but I definitely recommend it over purchasing cheap Chinese or other products that are more of a gamble and have many initial defects.
Not the common Red, not the annoying White explosive light, but a soft light emission similar to a bulb color as described.
I wanted to replace the one in my car.
This is a lifesaver for old car drivers who had given up on LED Tails because they were the only cool multi-light LEDs.
The phenomenon where the Blinker would not blink at intersections at night unless the Axel was blown, which is a common problem with old cars, has been greatly improved.
View detail
Fits: HARLEY-DAVIDSON Universal
Required for MooneyTail.
I used it on a Kawasaki 250TR Tail lamp (MooneyTail). It works fine, but it interferes with the lens unless you use a short bulb. I bought a regular bulb without knowing it and had to buy a new one. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contribute to power saving! Can be attached with a pontoon!
It is slightly darker than the OEM Valve, but is at a practical enough level.
Navigationetc. We have installed a lot of things to save power as much as possible.
Glad you're contributing! It's easy to pimp and it's RECOMMENDATION!!!!
View detail