Reviews
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
KSR2 is mounted and brightness is OK.
I installed it on my KSR2 and the brightness Level is OK both in Position and in Brake. Other users' impressions were that the brightness became dark, but with the KSR2, I was able to check the brightness even during the daytime and the Level is Large and sturdy.
The LED headlight is more expensive than the Pine Stripe LED headlight, so I can't say that it has superior cost performance, but the product itself is solid and a good product.
KSR is a small battery vehicle, so if you use a lot of electricity such as for an electric tachometer, water temperature gauge, smartphone charging, etc., it is recommended to use LED headlight and tail lamps to secure electricity quickly.
Finally, the packaging has been changed from a box to a thick vinyl package. I am concerned about the packaging of this delicate product if it is not packaged properly for mail order.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Brightness can be secured by attaching to KSR2
I installed it on my KSR2, and the brightness was maintained in both Position and Brake. I have seen some other people's impressions that the brightness became darker, but with the KSR2, the brightness is at a level that can be confirmed even during the daytime.
The price was higher than Matsu Stripe's LED headlight, so I can't say that the cost performance is excellent, but I think the product itself is a good product.
If the vehicle is powered by electric power (e.g., electric tachometer, water temperature gauge, smartphone charging, etc.), we recommend using LED headlight and tail lamps to secure the power.
Finally, the packaging of the product has been changed from boxed to thick vinyl, which is a bit worrisome since it is a Delicate product and if it is not packaged well, I would be concerned.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Used for CUB90
CUB90 is equipped with external Tachometer, various sensors, USB power supplyCoupler, and LED on the Tail to reduce battery load.
The bulb power consumption of the NORMAL is 15W/8 and the LED is 21W/5. The LED is not labeled in Lumen so I did not know how bright it was but I trusted Brand.
The large size is a little smaller than a light bulb, the bracket is in good condition and the tail lens has not been hit.
I read that it was a little dark in the impressions, so I cleaned the tail lens and put aluminum tape on the tail case, which is an old-fashioned way of doing things.
The Tail Chica-Chica is a little bit when the Idling is on. Stop-lamp is powered by battery, so it does not ChicaChica. The light is bright enough to pierce your eyes at some angles.
When the Lens is turned on, the ChicaChica of the Tail is not felt. The brightness of the Tail is about two-thirds that of the bulb, and the Brake is about the same or slightly stronger than the bulb, which is fine.
Tail is AC so ChicaChica is not an option but I don't know how it is for the life of the LEDs. I have been using it for about 6 months and so far no problems. I remove the Lens every once in a while, but it is not burnt or deformed.
After installation, the charging voltage did not change during idling. Battery load seems to be decreasing. I think it can go as it is.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
I thought it would be very bright.
Small is dark.
Stop-lamp is bright, though.
I think it saves power, so I hope it will last for a long time.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
good-looking
As for brightness, I did not find it too dark as others have mentioned. The power consumption is quite low, as LEDs are the only light source. I don't know about durability as I just installed it. It works well. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contribute to power saving! Can be attached with a pontoon!
It is slightly darker than the OEM Valve, but is at a practical enough level.
Navigationetc. We have installed a lot of things to save power as much as possible.
Glad you're contributing! It's easy to pimp and it's RECOMMENDATION!!!!
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Energy-saving, yet very bright.
AB26 12V used for DAX Tail lamp.
It is a good price, but we have changed everything to LED except the Tail.
I was excited to purchase this time.
I wonder if it is compatible with T20Double Bulb so it can be used for CUB etc....
Anyway, I thought the exchange was a good idea. It's so bright! Yes
Moreover, the voltage drop during idling is at the smallest limit, and the burden on the battery is very small.
I think it will be considerably reduced. By the way, with my DAX.
Before replacement, Tail:11.7V, Tail + Brake:11.2V.
After replacement, Tail:11.5V; Tail + Brake:11.5V.
It should be noted that the voltage does not change when Brake is applied. This is great!
The LEDs were replaced after I got home and have not been running, so the voltage may be low.
The rest should be long-life, even if the LEDs themselves are long-life.
The voltage adjustment circuit or something like that could break and stop it from turning on...
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Disappointed with low life expectancy
ADDRESSV125 CF46A has been converted to LED Bulb for low power consumption.
He passed away after about three months.
Inferior to Chinese products in spite of high price
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Saving electricity(^^♪
full of electrical charges (Lol)
Grip heater
Fog Lamp
JupiterNavigation
USB power supply
Digital meter
Other.
Maybe we can save a little electricity. (^_^;)
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Since it was the same as the original manufacturer's product, it was able to use in comfort. Since attachment is also only exchanged, it is easy.
Since it was the same as the original manufacturer's product, it was able to use in comfort.
Since attachment is also only exchanged, it is easy.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
To Our Safety Riding, Bright the Light!
ENG: This is most easy way to your bike Bright Tail light bulb why dont you try this more Bright then original bulb, more anti biverate worry, and less use voltage be advice... if you install this bulb and test the stop swith from right handle lever and foot brake pedal, if its not working, try up-side-down install then its working i was embarrassed ... haha KOR: Takegawa LED bulbs. The LEDs are white anyway, because the tail light itself is red, so it shows a bright red light, but thanks to the white light in between, it acts as a license plate light and is very bright. It will work. It probably has polarity. There is no fear that the filament of a typical halogen light bulb will break due to the vibration of a motorcycle. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contact failure occurrence
I bought it in 2015, when was that?
I noticed that it was not lit.
When I looked at it, I saw that the contact point of the base was gapped.
I put it back in the bulb.
It's too sad to throw it away like this (laughs)
Recheck the status.
If you turn the base, it will fit at the contact point.
There's a rattle or a wobble or something.
I fixed it with Epoxy Glue (lol) and it stopped moving.
Motorcycle is also a Regulator issue.
I don't plan on going LED any more than I have to.
Let's use what we have.
Ordered another one to use on my MC19 or 1KT (lol).
They both have a W in Tail.
But this time, I'll use Epoxy to harden it beforehand (laughs).
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Replace Stop-lamp with LED
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
very good
I bought this to convert my SL90 to 12v.
I used to make LED bulbs by myself, but nowadays it is faster to buy them.
This product is very good because the back part of Lamp is Red color and the part of License Plate Light is White color.
License Plate Light is too white, so it would be better if it is Amber color.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
LED!
I used it on my '11 SUPER CUB110 (JA07). It's very convenient to replace the LEDs with LEDs, because they have a super long life against Halogen. View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
LED peace of mind
When replacing a broken Tail Lamp Bulb on a LITTLE CUB
Purchased and used.
At a price that is many times more expensive for an LED bulb than a regular bulb
Yes, but the Tail/Brake bulb is out.
It may be difficult to notice that the KIP is poorly maintained and
It's boring to be cut off, so I bought the peace of mind.
Easy to install because it is only exchanged with the NORMAL bulb.
It is
Visibility is also improved because the color comes out brightly with "HADRILL
I'm sure you do.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
I like that the License Plate Light is white
LED Bulb with Red Tail and Stop and License Plate Light I was looking for a white one and this is what I found, so I bought it
I can't help but feel that it's more expensive than the cheaper Chinese ones, but there are few other options So it's no use
The base is so thick that it makes contact with the Reflector, and you can't turn it by pushing it in a little too hard And I couldn't install it This seems like it would be a problem in other cars …
Unlike the Headlight, the BENLY50 is a 12V system with the Tail via Battery No flickering and brightness seems to be a problem
I'd be grateful if more of these things were cheaper, but the car model standard these days isn't Valve It's an LED Unit and the demand for Valve may be low In the case of a motorcycle that doesn't generate much electricity, the power saving effect of an always-on tail is very small I think it's Merit, too
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
It doesn't feel like it's custom made at all
The external tail went bad and (Lenses dropped out on the cheap.) I had no choice but to go back to OEM, and since it's OEM, there's no chance of dropping out, but I'm back to NORMAL!
External Tails are getting cheaper, but they're still not getting cheaper despite being Bulb Type
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Can be used with AC vehicles
To install LEDs in an AC car, you can use a Diode or Condenser to rectify or Replace the Regulated Rectifier & bull;Wiring process etc You have to go through the trouble of loading the Battery and so on
However, this product can be installed in AC vehicles as well It is not intense brightness, but it has sufficient brightness
The Tail is prone to run out of filament due to vibration, so the LED Bulb is very useful It is also well made, so I have a sense of security
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Response is good
I changed to direct current by processing APE's TailWiring, so I had to change to LED to balance the amount of power generation I did
Response is very good and I am happy with it
In the past Impressions, it was said to be dark, but I have been using DC, so I don't care much It wasn't even close to being a
When the direct sunlight hits the tail lens directly, the amount of light can't compare to the bulb type, but it's a good idea to use a light bulb Since the Rear carrier+Box is installed, it is almost in the shade, so the visibility is good Large Durable
The cost performance depends on how long the life expectancy of the product is I did
View detail