Reviews
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
SR400 Tail with a modern look
The LED's characteristic sparkling light will also increase visibility. View detail
It's good.
It's hard to tell from the picture, but it's a power-saving, sharp, and reliable License Plate Light made by a famous Japanese manufacturer, so you can use it with confidence.
This product. Expensive!" If you are saying, "I am not sure. I think it is better to buy a high quality Valve from Japan, even if it is expensive, than to buy a cheap, low quality Valve from a certain country and replace it many times, which is definitely better in the total.
View detail
Fits: その他
Reliable Japanese Pine Stripe
This is for daytonalucas installed the other day.
LED bulbs.
Using the same product since Normal lamp
I have used it in the SR with a lot of vibration without any trouble.
I used it for over 3 years.
License Plate Light has White color and Bulb color with Pin position.
Please note that there are different types.
View detail
Fits: Others
Satisfied
It was difficult to find LEDs with integrated License Plate Light, and I hesitated because of the high price of this one (in my case, Quantity:2pc. (Set required) and safety safety parts, so I took the plunge and went with this one.
I was satisfied with the brightness, etc., but I had a hard time choosing from several Types when I purchased the product.
It would be great if there was a list of car models, years, etc., since they are so expensive and it would be a big problem if we make a mistake.
View detail
Fits: その他
A little expensive.
There is almost no voltage drop even when Brake is applied while the car is stopped to charge the phone and use the Grip heater. The same situation with OEM bulbs was a few V drop, so the effect is very Large. The brightness is also sufficient.
It is a little expensive, so I give it ▲1 star.
Oh, and check the model number carefully when you order!
View detail
It's a bit expensive
I think this price is a bit high for Valve, but it's cheaper than OEM and I don't blame them. It lights up fine, but I'm not sure how durable it is. View detail
Fits: その他
LED for Tail and Number common lights
[How is it used?
The tail lamp bulb was broken, so I decided to change to LED which I had been thinking for a long time.
Since it's an older model, the Number lighting is white and the Number lighting is a bulb color model.
Was the one you received as per Image?
As shown in product photos.
Was the installation difficult?
Simply remove the Tail lamp lens and replace it with an OEM bulb.
Easy to replace with just the Driver on-board tool.
How was your experience with it?
Brighter than OEM but not too bright and no flickering.
Maybe it's because the luminescence color is now Red, but it looks more distinctly Red than the OEM bulb.
Visibility in daytime seems to have improved somewhat.
[Included Parts:were they on?
Only the base paper and a simple Instruction Manual.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As the description says, the part number that fits the Tail Lamp Bulb changes depending on the Socket orientation of the Tail Lamp Bulb, so it was a bit of a hassle to check (but I had no choice).
View detail
Fits: その他
It's expensive but good..
Although I was attaching a cheap LED to the Stop lamp, it became useless in about 2 months, I made a lot of trouble deciding. Even if it is cheap, after all, since there is a case that will lose the purchase of cheap buyers, in any case it is safe to ride a Motorcycle hanging gold it is multiplied, otherwise it is an item I tried to save. I wish I had purchased this from the beginning. License Plate Light It will illuminate, and the Stop lamp is also bright, and consumption current is also small, so I am very satisfied. View detail
Fits: その他
I think it's pretty good
LED Tail Bulb also has a white color for License Plate Light, but this is a light bulb color
There is no discomfort even with the old car.
Greed might be better if there are more LED elements.
View detail
Fits: その他
More than SP ○ ○ - - -
It depends on the type of car you use, but it is obviously darker than the Normal valve when you attach the LED Bulb made of SP 0 to the KLX 250 on which I am on. I felt the danger and returned it to Normal valve. (Although there is no problem with VTR 250 - - )
M & H pine Stripe made domestically safe and sometimes referred to as a well-established Manufacturer, but I tried to buy it although it costs a little. It's brighter and more secure than at least SP 0.
View detail
Fits: その他
Performance as expected
If it is 250ccSingle, repeating CHOINORI will worry about insufficient charge of Battery so I bought it for countermeasures, installation is simple with a pon attachment, the feeling I saw such as brightness and lighting is good with a natural feeling that does not consciously consider LEDs much. View detail
Fits: その他
Used in MONKEY
At the time of putting this, LED Bulb did not come out from Mukawa yet, but I bought this Valve from the reliability that OEM has adopted although the price is high. At the moment, LED is high performance at a low price, but at the time it was still high only with high performance, it was a fragile image, but this Valve has actually been used for 6 years, it is absolutely no Trouble. Excellent illuminance. You can run with confidence without having to dig your bear at night. Recently the same Valve was issued in Mukawa. What is the price "Half price" Although I regret a bit for the reason that I am a little regretted, those who are considering introduction from now on may be better, but since I have demonstrated the performance that it is not broken at all for 6 years, double price Although it issued, was not it sufficient that the original price was taken?
It is a product not ashamed of the name of M & H.
View detail