Reviews
SUPER CUB110 JA59 and SR400 FE Tail lamp LED
[How is it used?
Tail lamp LED for SUPER CUB110 JA59 and SR400 FE to reduce battery load.
Was the one you received as per Image?
No problem
Was the installation difficult?
Both JA59 and SR have BoltQuantity for Tail lamp Cover.:Easy to use, just remove it with 2pcs and change to LED light.
How was your experience with it?
No problem.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
LED Bulb for improved visibility!
Replaced with StanleyLEDStandard valve to improve visibility of Stop/Tail.
The deciding factors were that it is made by Stanley Electric, which is also used as an OEM for domestic motorcycles and automobiles, and that it has the Japanese Vehicle Inspection Correspondence and luminous color. (Color) was the light bulb color.
Lumen value when luminous (lm) 370/45lm, Kelvin value (K) The light:2700K, a natural coloring without becoming BlueWhite with the explosive light of so-called LEDs, so it can be casually installed even on older motorcycles.
We also expect that the load on the Battery will be reduced since the power consumption will be lower with a rating of:12/24V 2.8/0.4W.
Compatible Light Bulb Type is S25 BAY15d, so it can be used for most car models.
In my case, I installed it on a TRX850, so I had to remove the Seat Cowl and Tail lens during the installation process, which was a bit time-consuming, but I think the Kill is Large sturdy without any particular need for more work than necessary.
View detail
Great!
I have a SEROW250 with a Grip heater, but when I turn on the Blinker and Stop-lamp with Idling, the voltage sometimes drops below 12v, so I bought it to save power.
Even if Stop-lamp is turned on, the voltage hardly drops and Large succeeds!
This is only for SEROW250, but the Tail lens is really hard to remove, so it is better to remove the Tail Lamp Lamp ASSY and work on it, even if it is troublesome.
Remove the Seat, Number, Rear Fender, and Tail lamp in this order, and you will find a hole through which the Hexagonal Wrench that removes the Tail lens passes.
Working without removing the Tail Lamp Lamp ASSY is impossible to attach the Lens, even if you can manage to remove it!
View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
1 pc. as spare
I haven't had to replace it in a long time.
Replace with a new one just in case
Well, it's just an ordinary light bulb.
Quantity:1 Set of 2pcs. so the other one is a spare.
View detail
just in case
For use in the car with Phillips Screwdriver for preventing ball breakage while on the road. View detail
CRF250 to full LED
CRF250RALLY50 was not LED only Tail bulb, so I bought it to change to full LED.
There are similar valves available from various manufacturers, but we decided to go with Stanley, a long-established manufacturer of light bulbs, because we wanted to get a good one.
Valve itself is very carefully made and very different from the inexpensive Valve.
The replacement itself can only be done by removing the Seat and then the Tail cowl, but it is not that difficult.
The light intensity after the replacement is also brighter, making it a very satisfactory product.
View detail
For automotive use
It is mounted on board with Phillips Screwdriver as a countermeasure against running out of Valve on the road. View detail
Stable Stanley
We introduced this led by saying Stanley in light bulbs.
The brightness changes as clearly as a light bulb when the Brake is turned on or off.
Then there is durability.
View detail
Savior of old cars
Tail lamp rated 12V23/8W S25 BAY15d StanleyA (BP) Replacement from 4879.
Quite good! Decided to come back here next time!
It is a bit expensive, but I definitely recommend it over purchasing cheap Chinese or other products that are more of a gamble and have many initial defects.
Not the common Red, not the annoying White explosive light, but a soft light emission similar to a bulb color as described.
I wanted to replace the one in my car.
This is a lifesaver for old car drivers who had given up on LED Tails because they were the only cool multi-light LEDs.
The phenomenon where the Blinker would not blink at intersections at night unless the Axel was blown, which is a common problem with old cars, has been greatly improved.
View detail
Standard will be this next time.
Double Bulb is used for Tail lamps, and I'd rather use a reliable brand with Stanley's name on it, rather than looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
We have not experienced any problems with the use of the License Plate Light as well.
View detail
It's nice.
I replaced it with LEDs because I thought that LEDs consume less power and are more battery-friendly. The brightness is moderate, and the engine speed does not change even if the stop-lamp is turned on during idling, so it seems that the burden on the battery has been reduced. View detail
Used in older CUBs
The LED Bulb is more comfortable than the LED Bulb made by a certain M company because it is reflected by the reflector, so there is no sense of discomfort when viewed from any angle, and because it is the same color as the White Heat Bulb, the Red LED light does not leak out from the colorless part of the Lens used to illuminate the Number when the Stop lamp emits a strong light. It is recommended. View detail
Fits: YAMAHA MAJESTY250 (SG20J), KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI ZEPHYR 400χ, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI W400, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 Custom, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI SUPERSHERPA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI ELIMINATOR 125, KAWASAKI ELIMINATOR 125
Single Cylinder Engine's Crying Point
The SR, CUB, and of course the ESTRELLA… are all single cylinder engines, so there is a lot of vibration, and the tail lamp bulbs are prone to breaking.
I thought about stocking a lot of cheap bulbs, but Stanley uses them for motorcycles and cars because they meet safety standards.
The bulbs are prone to breaking, but they last quite a while.
good point
OEMs use this product for both motorcycles and automobiles, so the safety standard is also applied. [Color] Clear。
Relatively high durability.
Easy to replace. Even beginners can do it.
A bad point
A little expensive.
Large is strong during the daytime, but at night, if the tail lamp is off, following cars will not notice it, so be careful if you drive a single-cylinder engine that vibrates a lot.
I will get a ticket.
View detail
Brightness with crispness
Used for KIJIMA's Lucas tail lamp.
When Brake is applied, it is firm and bright, which is very nice.
I am glad I bought it at a reasonable price.
View detail
The brightness is just right.
Compared to other products, the price was lower and the manufacturing was better.
The brightness is sufficient and visibility is good.
View detail
Purchased out of a ball
I bought it because the Tail lamp ran out of bulbs.
We'll see how long it lasts, etc. Be careful not to touch the bulb with your bare hands, as the grease from your hands will break it when you install it.
View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
As a walking stick to keep you from falling
I've started riding Motorcycles with more thought to prepare myself to protect myself than I used to
When the Stop lamp goes out on the road, especially at night, it is highly likely to lead to an immediate accident I found out when I came across an accident at a Touring destination
The person who was in the accident also noticed that the Lamp was out, but there is no replacement and Large will be strong It seems that it was a rear-end collision just as he was getting ready to say "I'm sorry, I don't know what happened
At worst Blinker is a hand signal and Head lamp is a high beam (Large is usually a low beam.) It is possible to substitute by adjustment, but because Stop lamp cannot be substituted, it is necessary to carry it as a minimum spare I did
It is packed in a small plastic container, which is sold at 100-yen or fishing tackle You can also store the Headlamp if you have been using it for quite a long time
We see quite a few elderly people driving cars these days, and the aforementioned accident was also the one that hit them By Elderly Mark 'I had no idea what Motorcycle's Brake was He talked about it
I don't want the Lamp to run out, it's easy to replace it if you have it, so think of it as a wand that you can't fall back on Prepared
(LED is also good, but there are also LEDs that suddenly stop turning on, so I dare to use Regular The ball is safe.)
View detail
OEM Parts for Repair
Because the tail lamp of SUPER CUB110 JA07 was broken, I replaced it with the for Repair I did
A broken tail lamp can be dangerous at night, and you could end up in the hands of the police It is
It is always a good idea to keep a spare in the car
View detail
Fits: HONDA PS250, HONDA CB750, HONDA V-TWINMAGNA, HONDA VTR250
Since the Tail lamp was becoming dark, it exchanged. Although it is cheap parts, they are important parts on security. Therefore, immediately, whenever a Lamp is dark or it has run out, since exchange is required, I will have purchased more one.
Since the Tail lamp was becoming dark, it exchanged. Although it is cheap parts, they are important parts on security. Therefore, immediately, whenever a Lamp is dark or it has run out, since exchange is required, I will have purchased more one. View detail
Fits: HONDA V-TWINMAGNA, HONDA CB750, HONDA PS250, HONDA VTR250
It has it ready in the Side bag as Trouble management at the time of a Valve going out. I think that they are safe goods reliable also from the established reputation.
It has it ready in the Side bag as Trouble management at the time of a Valve going out.
I think that they are safe goods reliable also from the
established reputation.
View detail