Reviews
TZr250R (3XV) Used for Tail lamps in
[How is it used?
TZr250R (3XV) The lamp was used for the Tail lamp of the
I chose this product as a replacement for a vehicle I purchased at an auction because the tail lamp did not originally light up on the vehicle.
Was the one you received as per Image?
I bought it because I was told that it was compatible with OEM Product and I had no problem.
Was the installation difficult?
The Cowl was already removed, so the exchange only took about 30 seconds.
In the case of TZr250R, replacement is easy because the Socket is just twisted and fastened without any special tools.
How was your experience with it?
It seemed slightly darker than the one that came with the original.
It is not difficult to see, and it may be a little darker. It is a Level that cannot be understood without comparison.
The light intensity is sufficient to be visible to following vehicles even at night.
[Included Parts:were they on?
This is the only product as shown in the photo.
[Was there anything that disappointed you?
There is no Level of dissatisfaction with the current situation.
【Review】
Products from a reliable brand that is also used as OEM, and less expensive than OEM parts. (OEM Parts:31L-84714-00 is 352 as of December 2022) So I think it is good.
I ended up only having the Socket side ruined and Valve was still alive, but, well, it is good to have it as a spare.
View detail
Blinker Valve replacement behind PS250
One of the beautification plans for the used PS250 is to change the Blinker from Orange color to [Color] I replaced it with Clear. So I had to replace it with Orange bulb, so I bought this one. This Valve is 23w, so it is for the back.
The old-fashioned Motorcycle seems to have been rejuvenated with a transparent and shiningly feel.
The used PS250 was a First Model Type, so it had square eyes. However, I replaced it with two round eyes like the Second Type Model (I had a hard time because the OEM is no longer available for this one). Especially, the frame of the light is not available. I bought one for ZOOMER for overseas). I painted the body like Second Type Model, so it looks young again at once.
I just wonder why the Valve with the Position lamp for the front is cheaper. This Valve in the back is 23w and I would like to see it sold in the $300 range if possible.
View detail
MONKEY
Blinker became unusable due to a broken bulb while driving on a farm road. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
The orange cover was removed and the bulb here was attached. It becomes a sharp and is very good touch.
The orange cover was removed and the bulb here was attached.
It becomes a sharp and is very good touch.
View detail
By blinker clear lens-ization of VTR250, since the front was exchanged for the orange ball, an one-piece pack was purchased in reserve.
By blinker clear lens-ization of VTR250, since the front was exchanged for the orange ball, an one-piece pack was purchased in reserve. View detail
By blinker clear lens-ization of VTR250, although exchanged for the orange ball, the thing of an one-piece pack was purchased in reserve in the case of the ball piece of RIA.
By blinker clear lens-ization of VTR250, although exchanged for the orange ball, the thing of an one-piece pack was purchased in reserve in the case of the ball piece of RIA. View detail
Now you're safe.
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good.
Recently I became really curious about it and found this in search of S25 Valve, the official standard.
Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.
View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA XSR125
LED conversion of CYGNUS
Only Blinker of CYGNUS was a light bulb, so Relay and Quantity were used to convert it to LED.:I purchased this product from Set.
It was a little Large strange to remove the Cover, but I managed to work with it.
The price is honestly high, but I am satisfied.
I wonder if Hazard and Passing switch are next…
View detail
Check for conformity with a knowledgeable person.
I had already replaced the OEMSmall blinker on my SR400 with a 15WType (OEM) Relay, so I thought I could install it with a bonnet, but it turned out to be a high flasher, so I ended up replacing it with a LED Relay at a motorcycle shop. The blinker of course lit up OK, but the SignalLamp of the Meter was so dark that I replaced it with a LED Lamp as well.
It turned out to be quite expensive with labor charges, etc. I wish I had consulted Motorcycle shop from the beginning.
The brightness is satisfactory for Large.
View detail
Inexpensive LED conversion of Blinker
[How is it used?
When replacing the Blinker with the Other Brand Product, I decided to use LEDs anyway and installed them.
Was the one you received as per Image?
The product description says "Orange", but the product label says "Color:Yellow (or more accurately, Orange with a strong Yellow tinge)
Was the installation difficult?
No different than installing a regular light bulb.
How was your experience with it?
Satisfied with LED-like sharp blinking, no difference in brightness between bulb and large.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I would have liked a more solid Orange color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Blinker relay is LED-compatible; wiring is required if the Blinker indicator lamp is a single light.
View detail
Fits: HONDA FUSION, HONDA FUSION SE, HONDA FUSION TYPE X, SUZUKI SKYWAVE250, SUZUKI SKYWAVE250 type S, Others , YAMAHA GRANDMAJESTY400, YAMAHA GRANDMAJESTY250, SUZUKI SKYWAVE400 type S, SUZUKI SKYWAVE400 Limited, SUZUKI SKYWAVE400, SUZUKI SKYWAVE250 type M, SUZUKI SKYWAVE250 SS, SUZUKI SKYWAVE250 Limited
Stable Stanley
Recently, I've been using only colored Valve, probably due to the reduction in cost, so I decided to go with Stanley. I like Stanley because it has a beautiful orange color, not the muddy color of colored Valve. View detail
Fits: HONDA HORNET250, HONDA VTR250
Stanley after all.
Small threads are colored Valve, but Stanley's Lens itself is Orange, so Stanley's coloring is better. The quality is not bad, but the colored Lens of Mr. Small's Lens is deteriorating over time and the Orange paint is peeling off, so Mr. Stanley's Lens is better after all. View detail
fraudulent image
Clear bulb was received with the image of Orange bulb.
Even though the description says "Small", is it really necessary to use an image of an Orange bulb?
Coco has a Habit of using these fraudulent images.
View detail
Perfect for PoshBlinker!
It's the worst, to Posh's Blinker. Reasonable price. Would love a spare! View detail
It went out fast.
I replaced the Valve on the Blinker and it cut out after 1 day of actual work. View detail
Can use
I replaced the Blinker lens with a Clear Lens and changed the Valve to Orange. It attaches without a problem and blinks, but the rattle after locking the Right turn is Large. The cost performance is the best. View detail
It's bright.
It's too bright.
Personally, I also think it could have been a little more understated.
It seems to bother him when he gets dazzled...
I think you will be satisfied with the price.
I think it will be a confirmation of durability etc. in the future.
View detail
as one would expect
(I have already changed Relay, so I can't verify)
It's sturdy and seems to be of higher quality than the Chinese products on amazon etc.
Because it is G18 and small, it is not as bright as the explosion light, but the visibility has risen from the original Halogen, and the place where it is not annoying brightness at night is
By the way, another product of S25Size with the same mouth Gold and a lot of choices is very bright, but I think the original is G18Size, the depth is too narrow to fit
The appearance when not lit is also Refreshing because the Amber color has completely disappeared from Clear Lens.
I'm satisfied with the performance, but the price is too high.
For about 2,000 yen, I'd agree 5 stars.
View detail
I think we have enough.
I bought this because I needed it when I relocated my Blinker.
I bought two of the same ones, but in different colors.
The price is cheap and it shines, so I thought it would be enough.
View detail
T 13WedgeOrange Ball
This is a great product that can be used normally. LED bulbs are still expensive so this is a great help. It is easy to replace. View detail