Reviews
Not bright.
Blinker on moped is now LED.
The brightness was dimmer than the bulbs and did not make sense.
However, the power consumption became smaller, so I think it was effective there.
View detail
Now you're safe.
I did not understand the standard of the Valve of Blinker properly, and when I converted to LED 4 years ago, I was forced to install the G18 Valve. The car passed the inspection, but I felt that the light intensity was not so good.
Recently I became really curious about it and found this in search of S25 Valve, the official standard.
Since the body of the Blinker was the full length of the S25 standard Limit, this product, which emphasizes compactness, is the best match. The light intensity was also sufficient.
View detail
Inexpensive LED conversion of Blinker
[How is it used?
When replacing the Blinker with the Other Brand Product, I decided to use LEDs anyway and installed them.
Was the one you received as per Image?
The product description says "Orange", but the product label says "Color:Yellow (or more accurately, Orange with a strong Yellow tinge)
Was the installation difficult?
No different than installing a regular light bulb.
How was your experience with it?
Satisfied with LED-like sharp blinking, no difference in brightness between bulb and large.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I would have liked a more solid Orange color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Blinker relay is LED-compatible; wiring is required if the Blinker indicator lamp is a single light.
View detail
It went out fast.
I replaced the Valve on the Blinker and it cut out after 1 day of actual work. View detail
Very good. There's nothing wrong with it.
I bought this to convert my SL90 to 12V.
Quality, light output, color, price all good!
I think I will buy LED bulbs from this manufacturer from next time.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
It's bright and snappy.
[How is it used?
One week after installation.
Was the one you received as per Image?
Just like the picture of the product.
Was the installation difficult?
I think it's easy if you have experience removing and installing Cowl.
How was your experience with it?
Originally I didn't plan to use LEDs, but I got the Blinker lens. [Color] The introduction of the Smoke makes it darker than expected when lit.
The result is a bright, crisp flashing light with improved visibility.
[Included Parts:were they on?
sufficient
[Was there anything that disappointed you?
Two points for me.
When I replaced the Relay, I turned the Relay body 90-degrees and tied it with a Tie Wrap because I thought it would be too much for the wiring if I installed it the same way as the OEM because the Relay body is larger and the wiring is longer.
The fact that it now responds with a slight delay after pressing the Blinker switch.
I'm just a little concerned about both of them.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
This was usually good
Well, it's a pimped-out version, and the Manufacturer can be trusted (this A different Manufacturer's product was defective at first, but I fixed it myself (e.g. "I'll be back")
To some extent
I give this product a good score
I hope you keep up the good work
However, I would like to see a quicker response to a defective product
Defective = 2 or 3 weeks is honestly atrocious
The manufacturer may argue that the end of the line is the norm, but the end of the line is that no installation defects are the norm I think so, sir
I don't need an excuse
We just need to re-check the operation completely again
It's not a cheap price to pay, so I'd like to make sure that any product works
The low score is based on the Gold amount, which is about as low as you can go to get on a costing scale, so that's why we gave it to you
This time it's Service Points
View detail
It's neither good nor bad
I exchanged with the Rear blinker ball of NINJA 400 2017.
Valve The LED with a high height interfered with OEMLens, so we chose this item with a low height.
It does not interfere with Lens and its price is also inexpensive compared to other companies, but the light intensity is enough though OEMLens is Clear.
Kawasaki may be part of it, but Valve's Lock pin becomes angle Type.
Please be aware that you can not install if you purchase equilibrium Pin by mistake.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
Stealth
It will be Prismatic StealthBlinker.
There is no problem with the amount of light at the time of light emission, and I like the color tone very much.
After that, how durable is it?.
If the price is a bit cheaper ...
is not it.
View detail
Satisfied
The price is cheap for LED,
I think the lighting situation is bright and easy to see good product,
Fairly LED products are expensive but I think this price is a good deal.
View detail
To the one-ball Blinker indicator which is often found in old cars - - -
It is a solid product.
However, although it is not limited to this product, the one-ball Blinker indicatorSpec. In Motorcycle, Blinker is in a Hazard state etc.. It seems that there are many things that become. In that case remove Indicator spheres or BlinkerPilotfor Both Left and Right car Harness LHN 700 etc. Let's use.
http : / / www. m-and-h-bulb. co. jp / lbeam / harness. html
View detail
It exchanges simultaneously with a relay of the company. A bright time zone is felt a little dark. The number of times of lighting is satisfactory. It seems that the burden of the after [ ] Battery was eased considerably.
It exchanges simultaneously with a relay of the company.
A bright time zone is felt a little dark.
The number of times of lighting is satisfactory.
It seems that the burden of the after [
] Battery was eased considerably.
View detail