Reviews
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
The car passed inspection.
It is pricey, but it passed inspection.
It is bright and BATTERY friendly.
Then there's the question of longevity.
View detail
If you want to replace Valve, this is the one!
RC390 (2021 model year) The OEM Halogen Headlight was too dark, so we replaced it with this LED Headlight Bulb.
The quality and texture of the product is perfect.
The process is similar to a typical Valve replacement, such as removing the OEM Valve from the Coupler, removing the ValveBody and assembling it in the reverse order as when the new Valve for the LED was removed, and putting together the Wiring.
However, there is a gray cap on the reverse side of the headlight of the 2021 RC390, which may slightly interfere with the aluminum heat sink. Therefore, we installed the headlight by rotating the LED bulb first and then pushing the cap in, while sticking the cap halfway in.
When I purchased this product, I was not sure if I could afford this price for two Valves since the 2021 RC390 has two lights.... But when I installed it, I was very impressed with the brightness.
Both Hi and Lo can be installed with the same work and no modification, and the brightness of the product is highly satisfactory with no complaints.
View detail
The cutline of the low beam is clearly visible.
This is a change from PROTEC LED Bulb. The construction is solid, and I am satisfied with no wobble when installing the for H4R pedestal (sold separately). The brightness is also sufficient. It would be great if it could pass the vehicle inspection after installation. View detail
From Chinese HID to Sphere LightRIZING2
Used for low beam of TDM900.
Additional Spacer 1980 yen is required for installation. (I could have made it myself)
Since the rubber packing in Included Parts:does not fit, the coupler will not fit unless the original rubber cover is cut.
When we got the vehicle, it already had 35W Chinese HIDs, so this is not a comparison with NORMALHalogen.
Even though it is a Chinese HID, it is 35W, so it was quite bright, so even after replacing it with RIZING2 LEDs, it seems a little dark.
The color temperature is higher than that of HIDs, or perhaps the color is comparatively blue.
I would have preferred 4500K.
However, I am glad to know that the symptoms such as the engine igniting when the high beam is turned on while the low beam of HID is turned on, as if the voltage had not caught up with the low beam, the light disappears for a moment, and the engine ignites, are gone.
View detail
It is quite dark for a Headlight Bulb.
[How is it used?
Purchased to save power over NORMALHalogen bulb.
Was the one you received as per Image?
The Package was poorly packaged with simple packaging, but the product itself is fine.
Heat sink is solid and not as badly made as I expected.
Was the installation difficult?
Installation is easy, as the valve is simply replaced.
How was your experience with it?
The LEDs are only on one side, so they seem darker than the latest LED bulbs. It is not likely to pass the vehicle inspection, and it is not suitable for a large motorbike.
[Included Parts:were they on?
Nothing is attached.
[Was there anything that disappointed you?
The drawback is that it is dark for low power consumption.
Recommendation for more high Watt bright LED Bulb.
▼The H4Type is sold out, and I feel that this functionality has reached its limits; it is a Headlight Bulb, so it is useless without functionality, so I can't shake the feeling that it has been eliminated as a result of the evolution of more high Watt LED Bulbhe.
View detail
LED from Halogen
I switched from Halogen to LED!
I think it is a little BlueWhite.
I am very satisfied with the dress-up effect and the ease of viewing.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
30W floating.
I have been using it for about a week.
Light is M&H Maz StripeB2 on DMR-JAPAN Multi-reflector used for about 2 years. [Color] Clear (35/36.5w) This is a change from
Direct AC compatible, so it is also compatible with KSR with half-wave rectification.
It blinks in Idling, but lights up normally when the rotation is up.
As for the depth in the Light, there seems to be room for about 5mm.
So far no discoloration deformation etc. of the Lens section, no thermal problems.
I feel it is brighter, but my impression is that it is too White for me and not easy to see.
I would replace it immediately if a VERSION with a lower color temperature is available. (4000-5000K)
Halogen → I floated about 30W with LEDs, so I will be able to increase my warming equipment for winter.
View detail
It's getting brighter
I don't know if it doubled in brightness, but it was brighter.
I put on 4500K and the color is white-ish. 6000K would be more blue-ish.
View detail
White light is nice.
Since they were inexpensive LEDs, I installed them as a trial.
Cool with bright white light!
I don't ride motorcycles at night because of my poor eyesight, so I don't have any impressions at night.
The durability of the product will not be known until some time has passed after installation, so we gave it a quality rating of 4.
View detail
Thin terminals
The high beam has a narrow beam range, which is often the case with LED bulbs, and this one has the same tendency.
However, the connection between the terminal and Coupler is loose, either because the terminal is too thin or the holes are misaligned. After a few months, the Coupler was almost disconnected when I checked it because it flickered. I don't think it is a problem on the coupler side because I have never had such a problem with Philips or KOITO's Halogen.
It may be an individual difference, but if you think the connection is loose, it would be better to fix it.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA LEAD110 EX, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI LETS4 Basket, SUZUKI LETS5, SUZUKI LETS5G, HONDA SUPER CUB110
Don't buy it.
Installed on JA07 → flicker light for 5 seconds → then nothing → disconnection confirmed
[Don't buy it.
View detail
It's dark
Halogen is better for this, it is darker. View detail
RIZING3 H4Hi/Lo installation and usage
Vehicle installed:SEA BASS DJEBEL250 XC
The heat sink interferes with the black plastic parts on the headlight reverse side, so it is necessary to shave it off. The wiring of the HID unit may be a little long, but it will not be a problem for installation.
The feeling is that it is very bright and the light distribution is not bad as I used to use cheap Halogen bulbs from Auto for Vehicle.
It is a good product for those who have a Grip heater or other equipment installed afterwards, as it consumes less power.
View detail
Good product
The light can reach very far in the close-up mode. The telephoto mode is not very impressive. I mainly use low beam so the product is very suitable for me. I bought a lamp with a color temperature of 4500k which gives a pretty good light. --------------------------------------------------- -------- The lighting is very far in the projection mode. The far projection mode is not very impressive. I mainly use close lights so I see the product that is right for me. I bought lights with 4500k color heat quite well. Powered by Google Translator View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
The brightness is good, but the length is not.
Reliable 3-year warranty.
It is long and seems to be able to dissipate heat well, so there is a sense of security.
However, it cannot be installed on a vehicle with a round head and no Clearance in the back.
I tried applying it to VMAX and Headlight will not close.
I bought it to put on my XR250, so there was no room at all.
The two armpits are brighter and the center area is darker due to the cut.:Pair (for Left and Right) I think this is due to the brightness and firmness of the cut.
I have an additional Spotlight, and thanks to AssistBeam, the front is bright when in High beam.
If the vehicle has Clearance in the back, the power box can be put away, so it is Large sturdy.
If the vehicle does not have Clearance, we will Recommend the God of thunder Gu ALPHA.
View detail
Processing required for Bracket type
In the always-on VMAX, the Chinese LEDs died early, probably due to heat.
This time, I wanted to go with a domestic product for somewhat longer life, so I decided on Sphere.
God of thunder 2 was rejected due to its length.
If God of thunder gu ALPHA, I thought the length is Large sturdy and bought it.
However, the claws on the pedestal are not clear whether they are designed for the strength of the aluminum diecast or not, but there is an extra part of the pedestal, and the lock does not close due to the claws if the VMAX with Ring Type Valve BlockCap is not a Harigane Lock Type.
Since the Valve is an Aluminum Diecast body, it can be inserted by shaving it with a Leutor.
Brightness and optical axis were Large sturdy.
Clearance in the back is also included.
If you assume some processing, it is better to do a lighting test and process if Large sturdy, considering the warranty for initial defects. If you do the processing first, you will not get the warranty.
View detail
Ideal for vehicles with inspection
The LED H4 for direct current was installed using the AC-DC conversion power supply for Headlight. (4-sided irradiation type)
The optical axis did not come out and I was forced to return Halogen,
We took into account the previous reputation of the AC-compatible H4, which would have a light shaft.
HS1 of God of thunder Gu2 purchased this time. pedestal processing premise.
The base of HS1 is small and sturdy.
The optical axis was perfectly aligned. The color is LEDWhite to SunLight, so it looks a little yellowish.
Merit is Large size because the conversion power supply could be removed, which simplified the process.
View detail
Good
At first using this product, I thought the light was not very impressive, but no, this product has a high degree of perfection, light distribution in cos easy to see the road, wide field of vision, convenient light without glare, in general, the more I use it, the more I like it. next time i will use delta's higher end product ------------------------------------- --------------------- At first, using this product, I thought that the light was not very impressive, but this product did not have a high level of completion of the light allocation in cos easily visible the wide view of the light -eyed light, not the more dazzling, the more you like Next time I will use the more advanced product of Delta Powered by Google Translator View detail