M&H MATSUSHIMA Motorcycle LED Headlight Bulb Reviews

Filter

Write a review and get Webike Points!

Reviews

M&H MATSUSHIMA

22 Apr 2024

Led Headlight Bulb for MopedsPonled PH7

Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50

Japanese Webike user

4/5

Easy installation, no brightness problems.

Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness. View detail

M&H MATSUSHIMA

07 Apr 2024

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

5/5

WhiteLight and good looking!

It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light. View detail

Led Headlight Bulb for Moped Ponled PH11

M&H MATSUSHIMA

04 Apr 2024

Led Headlight Bulb for Moped Ponled PH11

Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ

Japanese Webike user

4/5

Punching in as is

As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.

I don't know about durability so far. View detail

M&H MATSUSHIMA

04 Apr 2024

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

5/5

Bright and low power consumption

I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling. View detail

M&H MATSUSHIMA

17 Mar 2024

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

5/5

I put it on my RG 50Gamma.

It's just like changing a light bulb.
There is no problem View detail

Led Headlight Bulb for Moped Ponled PH12

M&H MATSUSHIMA

05 Mar 2024

Led Headlight Bulb for Moped Ponled PH12

Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D

Japanese Webike user

4/5

No problems so far.

I just wanted to White the Light, so this cheap Valve is sufficient. View detail

M&H MATSUSHIMA

30 Jan 2024

Led Headlight Bulb for Moped Ponled PH11

Japanese Webike user

4/5

Easy Pon-mount LEDs

LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail

M&H MATSUSHIMA

30 Jan 2024

Led Headlight Bulb for Moped Ponled HS1

Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC

Japanese Webike user

4/5

Easy Pon-mount LEDs

It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail

M&H MATSUSHIMA

13 Jan 2024

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

2/5

subtle

Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb. View detail

M&H MATSUSHIMA

09 Dec 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

White light!

The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail

M&H MATSUSHIMA

24 Nov 2023

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

4/5

Headlight LED

Installation was easy. It was brighter than I expected. View detail

M&H MATSUSHIMA

12 Nov 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

3/5

Low cost Low Bright

To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail

M&H MATSUSHIMA

06 Nov 2023

Led Headlight Bulb for Moped Ponled PH12

Japanese Webike user

4/5

LED is still bright

We replaced Halogen with this product.
I feel that there are fewer opportunities to be forcibly interrupted at night than before. View detail

M&H MATSUSHIMA

04 Nov 2023

Led Headlight Bulb for Moped Ponled HS1

NO NAME

2/5

The LED light bulb brightness and projection angle

I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating. View detail

M&H MATSUSHIMA

28 Oct 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

It is easy to install.

The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement. View detail

M&H MATSUSHIMA

22 Oct 2023

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

5/5

Used on a 50cc 2Cycle moped. Quite bright!

I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one. View detail

M&H MATSUSHIMA

29 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

5/5

M&H Mazda StripeLED Bulb installed in Z125pro (last model)

[How is it used? Mostly city driving

Was the one you received as per Image? Yes.

Was the installation difficult? Quite easy.

How was your experience with it? The color of Light becomes White, and it is very good to brighten it up.

[Included Parts:were they on? None

[Was there anything that disappointed you? None

Point and hang of installation HEXBoltQuantity holding the head lampCover:Pair (for Left and Right) and loosen the Bolt under the Head lampCover to reach the Valve of the Light. Then, simply remove the cover, remove the bracket that holds the valve, and replace it. No modification is required.
It is better to use LEDs for the position lamps as well, since the overall color is whiter. View detail

M&H MATSUSHIMA

28 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

5/5

LED Headlight Bulb for Z125pro (last model)

[How is it used?
City Riding/Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy. No machining is required. All you need are ordinary tools.
How was your experience with it?
The light color is WHITE, brighter and very good. See photo for color difference.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Head lampCoverQuantity with HEXWrench:Pair (for Left and Right) HEXBoltQuantity:Remove the 2pcs. and loosen the normal bolt that holds the bottom side of the Head lampCover. There is no problem to install the valve, such as the large size.
[ITEMS TO BUY TOGETHER
LED Position Lamp (T10Type)
The low price with a reliable Brand is sufficient to meet the demand for LED conversion. View detail

M&H MATSUSHIMA

23 Sep 2023

Led Headlight Bulb for MopedsPonled PH7

Japanese Webike user

4/5

It's brighter than a white-hot bulb.

Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem. View detail

M&H MATSUSHIMA

13 Sep 2023

Led Headlight Bulb for Moped Ponled HS1

Japanese Webike user

4/5

Necessary and sufficient

Used on KLX125
High WattageHalogen bulb burns out after about 9,000 km, so we replaced it with PonLED.
Currently, the cost is higher than that of Halogen bulbs, as they can be used for more than 10,000 km.

Since the shape of the mold mouth is the same, the waterproof cover can be simply inserted, and it is as waterproof as OEM. Since it is a safety component, it is very important to ensure reliability when driving in the rain.
Although the overall length is about 1 cm longer, no interference or melting of the headlight cover has been observed.

Webike's Product Spec. The M&H Mazstripe Home page and Package only list the luminous flux as 6000k (Kelvin). Product Spec. I am not sure of the source of the information on the
Since it is more important whether the light intensity is high or low than whether the light color is White or Yellow, I would like to see Lm (Lumen) rather than K (Kelvin) indicated as the official manufacturer's information.
Physically, they feel that they are much brighter than regular Halogen bulbs.

The low beam illuminates too close when the high beam's optical axis is set slightly below the horizontal plane. It is difficult to decide where to set the illumination range. Also, the light distribution is H-shaped due to the heat sink at the tip of the valve. Another minus point is that the light axis easily jumps to oncoming cars.

Recommended for those who require ease of installation and reliability due to simple construction. View detail