Reviews
I managed to get it on.
I was doing some maintenance at the beginning of the season and found Takegawa's air filter rusted.
I thought maybe I washed the car too much. I thought I might have washed the car too much, so I asked for just the filter part, but there was no part number.
My Grom is a JC75, and I need to spend another 1 man yen for the filter. Just thinking about the future... painful expense.
I looked for a lot of things, but I couldn't tell from the pictures if it would work or not.
This filter has a slightly bent duct, and the diameter should be the same on both the JC92 and the JC75.
I bought it The result was not attached.
However, since I bought it, I thought a lot about it and replaced the duct part of the filter that was already attached with this filter.
The diameter is a little different, but fortunately the filter I'm replacing is narrow enough to fit.
trial and error Yeah, I got it.
I'll have to see what else I can come up with until it's time to replace it again.
I think Takegawa should have released repair parts since it is a filter.
View detail
Air filter kit
I am amazed at the amazing effect of the simultaneous installation with F-Con. View detail
be motivated
Performance has not changed significantly due to FI, but the sound is great.
Satisfied with motivation Sound
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
hopeless
High RPMs no longer extended and returned to OEM! View detail
Specifically designed air filter kit for your big throttle body equipped Monkey
About quality and texture, I can confirm that the quality is great and that the materials used is cotton gauze for the filter material, surrounded with a stainless steel mesh and rubber mounting base. About the feeling of use, Specifically designed air filter kit for your big throttle body equipped Monkey. The intergrated breather nipple is extremely convenient and direct throttle body fitment improves top end performance. Products to buy together, While looks and performance are improved over the original Honda setup the ability to use the bike in all types of weather is not. Adding a water proof covering would be ideal to also add to your cart to overcome this negitive aspect. Difficulty of installation, I can say the fitment of the air filter kit for my installation was easy due to the ease of access and simple nature of securing the air filter directly to the throttle body with the included band clamp. Cost performance and comparison with other products, The pricing of this product is great, much cheaper then other air filter kits for the Monkey that are available. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: YAMAHA Virago 250 (XV250), YAMAHA Virago 250 (XV250)
Uncle T
This kit fits perfectly looks good and is easy to install. Eliminates the unusual looking intake pods on the frame. Shipped and delivered very quickly to the United States. Excellent experience. View detail
![AIR CLEANER TEAR 91-16XL [1010-0326]](https://img.webike-cdn.net/catalogue/images/35309/10100326_TS.jpg)
Fits: HARLEY-DAVIDSON 883 Low XLL, HARLEY-DAVIDSON 1200 Sport XLS, HARLEY-DAVIDSON 883 Deluxe XLH, HARLEY-DAVIDSON Sportster 1200 XLH, HARLEY-DAVIDSON 883 Custom XLC, HARLEY-DAVIDSON 883 Low EFI XLL, HARLEY-DAVIDSON Sportster 883 XLH, HARLEY-DAVIDSON 1200 Roadster XLR, HARLEY-DAVIDSON 1200 Custom EFI XLC, HARLEY-DAVIDSON 883 Custom EFI XLC, HARLEY-DAVIDSON 883 Roadster XLR, HARLEY-DAVIDSON 1200 XLCP, HARLEY-DAVIDSON 883 Roadster XLR, HARLEY-DAVIDSON 883 Roadster EFI XLR, HARLEY-DAVIDSON 883 Roadster EFI XLR, HARLEY-DAVIDSON 1200 Custom XLC, HARLEY-DAVIDSON 1200 Low EFI XLL, HARLEY-DAVIDSON 1200 Low XLL, HARLEY-DAVIDSON 883 XL, HARLEY-DAVIDSON 1200 Roadster EFI XLR
Affordable price!
I like the NORMAL shape also Large, but I exchanged it for Accent and the effect.
To be honest, I am not sure about the effect, but the appearance of the Engine looks better with the Smaller Air cleaner.
The shape and Large size are fine.
If you want to go back to NORMAL again, you can.
I am satisfied with Large for once.
View detail
It's a fun ride!
[How is it used? Mainly for city driving.
Was the one you received as per Image? Yes.
Was the installation difficult? It was a little difficult for me, I watched SP Mukawa's YouTube video of the installation and worked on it.
How was your experience with it? The bass sound coming from the bottom from 3rd gear is pleasant.
[Was there anything that disappointed you? Not particularly
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
It could be installed on the Mukawa SCRAMBLERExhaust System.
The product description said it could not be used with the Exhaust System Up Type, but I was able to install it successfully.
The picture in the Instruction Manual was a little confusing because it was mono-black, but I was able to install it without any problems after that.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
SP Mukawa Air filter kit
The OEM air cleaner was too Large and looked too bad, so we replaced it with a Lack Gawa air filter kit.
It looks good, has a custom feel, intake sound, acceleration, etc...different from the NORMAL! 。 The price per item is affordable.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Installed in Exhaust System Up Type
The suction sound is better from around 4000 rpm and the mid-high range extension is better. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
It is now attached.
Before I bought this product, I gave up because I was told that it could not be used for the Exhaust System Up Type, and I had purchased and installed KITACO's Unifilter, but it did not feel quite right and I was not sure what to do with it. There is only a couple of millimeters gap between the Exhaust System and the Exhaust System, but I managed to get it to work. I am satisfied with the Large size, which is my preference. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
Purchased to take Air Cleaner Box.
I wanted to remove the large Air Cleaner Box, so I bought one instead.
The intake sound and appearance were nice, but I didn't feel like there was much of a power increase that I could feel. (Personally)
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, Others , Others , Others , KAWASAKI ESTRELLA, KAWASAKI 250TR
To a wolf in sheep's clothing Spec.
This air cleaner has a classic shape. Although it looks like a Classic, it is also compatible with FCR Carburetor Bodies. The filter itself is not large, but the fact that it can be attached to an FCR Carburetor Bodycarburetor is a benefit.
good point
First of all, the appearance. First of all, it looks like an old United Kingdom car.
It can be combined with the FCR Carburetor Bodycarburetor to increase performance.
It's a cover, so it can withstand some rain and wind.
A bad point
The only thing is that you have to buy Adapter separately.
Even if it looks good, it's not enough if it can't be upgraded. In this respect, it's good to be able to use a high-performance carburetor.
View detail
Fits: HONDA MSX125 SF, HONDA GROM, HONDA MSX125, HONDA GROM, HONDA GROM
Very effective.
The muffled feeling with the NORMAL air cleaner was improved and the intake sound became a sound that I liked.
The slow feeling in the midrange became better. The interference to the Shroud is limit safe, but I think it is good to put the Cushion material etc. when Throttle and various Parts are built in.
View detail
Air cleaner for jc92
[How is it used?
I've been waiting for about 4 months to receive my order, and I think the power is better than normal.
Was the one you received as per Image?
I thought it was cheaper than Image. Especially the Cover.
Was the installation difficult?
I didn't think I'd use it with Normal parts turned off, I can't turn it back to NORMAL, I have Hose turned off.
How was your experience with it?
I think I'm feeling powered up.
[Included Parts:were they on?
It came with an extension Hose and one Bolt.
[Was there anything that disappointed you?
Since there is no detailed Instruction Manual, the adjustment of the air volume is delicate.
Other items that would be helpful
Request I would like to see an Instruction Manual with detailed information.
View detail
Measures against secondary air contamination
I fixed the problem with the mounting bracket with my own modification, but the problem of secondary air contamination remains.
As you can see in the attached photo, I used 38φSiliconHose(180°Elbow) to make etc. diameter pipe, and implemented secondary air mixing measures.
I'm happy to get the original performance of the Power Filter, but if I have to go to this much trouble, it's much easier and more economical to use other parts.
View detail
Mounting Bracket does not fit * Requires processing.
There was no column for JC92 before, so I described it for EBJ-JC61 and ThailandSpec.MSX125, but if you fix it to the car body with the original mounting bracket, the Side cowl (Shroud) will interfere with the cowl and the cowl will not be attached.
You need to cut the mounting bracket and make your own craft as shown in the attached picture.
The photograph shows the situation in the middle of the second trial and error. Because the connection part with the Suction pipe of the Throttle body is only a fitment, secondary air enters by vibration etc. even with this.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI Address 110
Caution! OEMAir cleaner must be processed!
First, a note of caution.
OEMIntakeHose is not reusable.
Because Air Cleaner BOX and Hose are also separated, the person who wants to return Air Cleaner BOX and does not have Coking material, etc. will exchange the whole Air Cleaner BOX. Please note!
? Cannot be poned. There is cutting processing as shown in ?
About the installation.
It is simply constructed by plugging the OEM IntakeHose into the included Stainless Steel tube.
The Stainless tube is thicker than the Intake Rubber hose, so it can hold more Garbage in the carburetor. If it is not good, Small insects etc. can also enter.
If you don't want to break the Motorcycle, you need to seal the connection here. I used Grip bond on the entrance side of the Intake and glued it to the stainless tube, then sealed it with heat resistant aluminum tape.
Once safely installed, the first thing you'll notice is the Clearance with Monoshock.
If you have an external Shock, it is likely to interfere.
I'm also going to put in a KITACO for DIO110 in the future, so I'll offset it a little more outside.
As for the sound, it is a combination with Beams HeatTitaniumSP, but the bass sound when Torque is applied from 40km/h to 40km/h became as loud as a big scooter.
If you don't open the Axel, it's quiet, but if you're driving on a national highway, you might get pulled over by a policeman…?
General Comments.
This is an Exclusive Design product, but it's poorly made.
The Instruction Manual is flimsy and hard to understand.
It requires a lot of processing.
There is no need to be Exclusive Design.
Looks and sounds alright.
View detail
JC92 needs to be modified.
I use it on my JC92.
It cannot be installed without processing.
If you fix the cowl with the mounting bracket, the side cowl (Shroud) will interfere with the cowl and the cowl will not be able to be attached.
I cut the mounting bracket and bought a pipe clamp and bracket at Mome Center.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail