Reviews
Used for Protective Tube of 6V MONKEY/GORILLA Main Harness
Used to play 6V MONKEY/GORILLA Main Harness on GT80. The original Protective Tube had become hardened and chica-chica, so I used it to replace it. After the replacement, the harness became more flexible and I was able to handle the wiring without difficulty. The 1M sales unit is a big help because I could only find other products in 20M or 50M. View detail
Back, I have a theory that it will be unavailable.
I used to be quite fond of the Black GlassTube for protecting the Wiring section, but I had wondered why Black was being discontinued in many Cases recently.
Apparently it's part of the global regulation of rohs? The Black GlassTube is apparently out of stock.
I'm not sure how beautiful it would be to have a BlackFrame with White GlassTube protection.
View detail
To hide the Wiring around the Handlebar.
Used for Wiring around Handlebar of FXDL1450.
Compared to the OEM Vinyl type, it gives a crisp and custom feel.
You can also choose the length & thickness.
View detail
Best for heat resistant Wiring part
I used NeoFACTORY's Colgate tube and it was good, so I bought the Silicon tube this time.
The effect of heat resistance is not understood well yet, but I tried to adhere to the Engine which became hot, but I think that there is heat resistance effect and it is not easy to kink, so it is helpful.
Anyway, the price is cheap, so it is very helpful.
View detail
Battle at price
This is the second time I've ordered this product, and I bought it again because it nicely hides the various power cords sticking out from the outside.
Anyway, if you put 1 pc in Garage, it will be useful for something.
View detail
Used for rewiring of old car Just the right size
Because my motorcycle is an old car, Wiring will start to lower the voltage with ageing, so I will pull it out again
I used it, and although this Size is just fine for a Wiring or two, the city MotorcycleParts store
It's very helpful because many of the ones sold at the three stores have thicker ones and the thin ones are not sold
View detail
Wiring is clean
It's used for the Wiring Cover of CYGNUS X, MONKEY's external power supply and outlet
The way to use it is to put it over the cord that was taken out of the power supply by an individual It's not so pretty with the direct exposure to the Handlebar and Meter area etc But by interrupting it in the Slit tube, it's neat and tidy
You can do beautifully even with Heat Shrink Tube, but if you have a coupler or something like that, you can use it I have to remove the tube from the Coupler and install it and then play the Coupler again It's very easy to store with this Slit tube
View detail
Easy shrinkage with Dryer
Quality is solid; used for Wiring connections on SEA BASS motorcycles Shrinks easily with Dryer
You can buy it as a Stock if you order it with other things at We-BigSale for a discount Maybe
View detail
Quality is assured
Quality is solid; used for Wiring connections on SEA BASS Motorcycles
You can buy it as a Stock if you order it with other things at We-BigSale for a discount Maybe
View detail
I stiff too much and can not handle ordinary.
Harley 's Parts shop items, but it is difficult even to bend stiff. It looks like Mesh Tube, but it does not stretch at all. I thought about using it for Wiring but it became a Garbage. View detail
cheap
Although I was slightly worried because it was cheap, texture etc.. I think that it is a very good product, unchanged from the Manufacturer object. I do not know whether durability will make a difference, but there is no problem to use normally. View detail
Purchased as a conduit of Hose - - - -
Wiring We purchased instead of a conduit for curing Hose sorting in vacant space in Frame, not for consolidation purpose.
In conclusion it is as expected and satisfactory.
Dare to complain, product features (such as heat resistance etc. ) And I wanted to have Slit no choice in choice.
View detail
I used it for processing Blinker. Inexpensive ◎
I am watching Impre and buying it for Blinker and using it.
Certainly it is exactly right to enter two Exactly.
There was also flexibility and it gathered cleanly.
Akihabara's Sengoku same etc etc. Or rather cheap, so it's recommended..
Rather than being covered much by Sengoku,
(It is natural that it is not specialized in Motorcycle)
Depending on Size NeoFACTORY may be better ^ ^;
View detail
Cheap and convenient for selling out
【What made you decide the purchase?】
It is a place to sell out in meter units, whatever you say DAYTONA etc etc etc. , It is overwhelmingly cheaper compared with other companies.
【How was it actually used?】
It was good that it was almost same as the one used for OEMHarness.
However, since this product has a slight gloss on the Tube itself, if it is used for Ninja 250, since the original Tube is non-glossy, will it just float for a part just changed?
[Others]
Since there is no Manufacturer notation on the Tube itself, I do not know where it was manufactured so that it is for reference.
In the case of automatic for Vehicle, Catalog at Yazaki Denki has a heat-resistant temperature of 100 ° C.
However, PVC (Polychlorinated Vinyl) Since it is 60 degrees to 80 degrees itself, I think that it is good to use it within this range just in case.
View detail
Because it is hard to obtain it unexpectedly, when you buy it together at shopping, ◎
【What made you decide the purchase?】
Cheap price.
【How was it actually used?】
Quality is good and can be used without any problem at all.
【Was it difficult to install? (Hard parts case)】
It is not difficult.. If ordinary code you can enter up to two.
【Please tell me the point of installation and hang (in the case of Hard parts)】
If only the code 2. If you have a Bullet Terminal you can only pass one Bullet Terminal.
It is better to use Oil spray or soapy water when passing the Bullet Terminal.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Large can of measure of (How many items to enter, etc.) And the set sales of 4-6-8 - 10 mm also exist
I think that it is convenient..
【Have you compared items?】
OEM Product, Heat Shrink Tube
[Others]
For Blinker's Wiring. We bought it with Big.
If it is 4 mm on the image, Large body code Quantity : It will be Size for 2pc.
If there is a Bullet Terminal, you can only pass one Limit. The second one is impossible. Honestly code Single Body
It would be better to install Bullet Terminal through.
Although it was cheap, I was worried about quality but it was a fear. It is quite unrepeatable with OEM.
Until now I was deceived by Heat Shrink Tube, but it gets worn out soon and it looks not good as well.
After all the exclusive Tube is usability - It looks very good.
Incidentally before buying just in case in Akihabara same etc. I searched for items, but it is over there
Things were mostly for indoor use, Size and thickness were not good. On a Tube that is likely to be used
It is expensive as it gets. It seems everywhere seems like it seems quite handy.
So, even though I want it, it is hard to get it out of the unexpectedly
I think that you should buy it when you shop.
View detail
Since appearance was also uneasily bad only at a Cable tie although a longer code is bundled, the Tube was purchased to it.It was a Size of the Exactly letting two codes of the thickness of 0.5sq pass. Since it stops passing also by the diffe
Since appearance was also uneasily bad only at a Cable tie although a longer code is bundled, the Tube was purchased to it.It was a Size of the Exactly letting two codes of the thickness of
0.5sq pass.
Since it stops passing also by the difference among merely few Sizes if it becomes this thickness, before purchase, cautions are required.The tube body has sufficient thickness and elasticity to protect a code, and is very easy-to-use.
Since it can purchase per meter, it is dramatically convenient again that only a required part can be obtained.
I thought that it was very appreciated as a Sunday mechanic that such accessories are in a Lineup perfectly although it is a casual Parts.
View detail