Reviews
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Flashing relay
Since the OEM of the MONKEY125 is an LED unit, the Blinker with LED bulbs would be a high flasher, so I was looking for a Relay and found a pontoon from KITACO, which saved me a large change.
It was under the Tank, so it only took a while to remove the Tank.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Works as expected on a JB03 Monkey 125
Installed Kellerman Atto indicators front and rear with stock relay and had hyperflash. I ordered this Kitaco LED flasher relay for my JB03 Monkey125 and it fits/works great. No more hyperflash. The relay is located under the fuel tank, the easiest way to get to it is on the right side. Lift the tank up 2 inches for easy access. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Can be pontooned onto X11.
I purchased this for high flash support when I converted my X11 to BlinkerLED.
Although X11 is not listed in the compatible car models, this product can be used.
The Clip for installation is the same shape as the OEM one, so it can be popped on. This product is shipped with a protector to prevent the Clip from breaking, so it should be removed before use. (It's hard, but screw a slotted screwdriver into the nail to remove it.)
View detail
Fits: Others KEIHIN(KEIHIN)PWKΦ28MCarburetor, Others KEIHIN PWKΦ28Carburetor(Old type), Others KEIHIN(KEIHIN)CRMINIΦ22Carburetor
for PC20.
I lost this part for PC20 and was looking for it for sale in Single Item.
It was helpful to have it available in Single Item.
View detail
Mixed use of LEDs and bulbs
The front blinker by the OEM bulbs had burned out, so I replaced only the front with LEDs, but the OEM flasher would not stay on.
Therefore, the front is LED and the back is a mixture of LEDs and bulbs, but they are blinking properly without any problem so far.
The LED Blinker is from NC Racing CNCRACING and the resistors are also from NC Racing CNCRACING.
View detail
To replace the degraded OEMRelay
[How is it used?
Replacement from OEM that had deteriorated and had a weak Relay sound.
Selected this product so that it can be replaced with LED Blinker in the future
Was the one you received as per Image?
A little smaller than I had imagined.
Was the installation difficult?
All I had to do was replace it.
How was your experience with it?
Works fine in two ways:front and rear 23WHalogen, LED approx. 2W + Halogen 21W. Have not yet tested with front and rear LEDs.
[Included Parts:were they on?
Elastic band and 2-poleCoupler+Wiring that can be installed just like OEM (Bullet Terminal processing etc. required if used)
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Relay has no operating noise
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
STREET MAGIC can be replaced in 5 minutes
I changed the Blinker to LED and it stayed on, so I replaced it.
It's between Headlight and MeterLeft, and no tools were needed!
If you do not reuse the conventional mounting rubber, the direction will be different and the wiring will not reach.
Blinker sound is now more subdued and blinks faster than before.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
KITACO Blinker relay for LED
I was trying to keep the wattage as low as possible.
APRIO has Relay under Meter
the reason is that ...
While replacing the Relay, the Front Blinker
LED.
Rear blinker is still there. "Ball."
YamahaOEM Product?
It's a sock.
It makes a chica chica sound.
I think it is a thankful product.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Since the OEM relay is broken.
The OEM relay was broken, so I chose to use the Blinker LED as well. for ADDRESS V125, but I was able to use it on my 2-stroke ADDRESS V100 without any problems. View detail
Items that will make you age 25 years younger!
I remember when I was young (a mystery), I used to run Blinker as a high flasher to make it stand out, and I bought it as soon as I found it.
Webig doesn't seem to have it, but I used Emon's Tri-pole Coupler and installed it.
Normally, the number of blinks is moderately fast, and during inspections, the number of blinks is reduced to within inspection standards.
At first, I thought to put it on the outside of the car body so that it may be easy to turn BodyDial while driving, but because this product is not waterproof, I only put it next to DigitalIgniter under Seat.
* The video is FZr1000 My car introduction
View detail
From self-satisfied Blinker LED's to mixed LED bulb specs are OK.
important item
[Was there anything that disappointed you?
When Blinker starts blinking, it is ONStart, but sometimes it only lights up for about 0.1 seconds.
Do you have any wishes or improvements you would like to make for the Manufacturer?
Make sure the GunBatte resistance-free LED bulb is set to Relay onStart.
[Do you have any products to compare it to?
DAYTONA LED Corresponding Blinker Relay
Frequently Asked Items
What made you decide to buy?
I tried to make a high reliability LED blinker with a normal blinker lens.
The point is that I wanted to use only LED bulbs, and I wanted to use LED bulbs that don't have resistance.
When I bought it, Daytona's was not yet in stock, so I went with this one.
Also, I had accumulated Webeike Points & the POINT deadline was coming up. (*´yeah*) pop
How was your experience with it?
It was no different than NORMAL with 85 flashes per minute (I was hoping for that kind of thing).
I noticed after a while of using it, but it is not always ONStart, and sometimes the light comes on briefly for about 0.1 seconds before it starts to blink.
Was the installation difficult?
No. It was totally Bolt On.
【Please tell me the installation point and hang】
What? Do you want me to write that again? (//∇//)
My motorcycle simply removed the NORMAL from the Connector and replaced it in its original position.
[Was the Instruction Manual easy to understand?
I wasn't having a problem with that.
[Included Parts:were they on?
Yes! It came with a FemaleConnector with Wiring for processing.
If you can use a solder or crimped pliers with a different connector shape, there will be a wider range of models to fit.
[Others]
While working, I checked and it worked with a mix of LED and White heat bulbs.
It's definitely not ONStart0.35 seconds on Relay, so it's sharp at the same time as Blinker. (!!!) It is not suitable for those who want to change their career path.
The same trend seems to be true for DAYTONA and other companies' LEDRelay.
In the case of the above symptoms with DAYTONA or other companies' Relay, it seems to be possible to solve the problem by using LEDs with resistance or white heat bulbs, but of course LEDs with resistance are more heat resistant, and if you turn on the hazard for a long period of time, the LEDs may go down.
Therefore, I will use it as is for a while.
In addition, BlinkerLED was changed to BlinkerLED, but because of the replacement of only the ball, the appearance does not change and the satisfaction level is the same? It was a W
There are a lot of external LED blinker kits available on the market, but they are not noticed by people who don't know about them, and even if they are sequential or high-sidered, they are not noticed. ” It is a self-congratulatory dress-up in the state.
It's a good idea to go back to the basics and customize your car to meet the safety standards while still being easily recognized by other cars. (Regardless of the laws and regulations, as long as the car is on a public road, it's up to the officer in charge and the inspector to decide what to do.
View detail
Enigma is the next generation, but...
KITACO:A cable that is necessary to connect i-map and PC.
The map for NEOBore up is not included in i-map. Required.
If the interface cable necessary for i-map can be purchased a little more cheaply, it is saved. Moreover, since i-map has become old, I expect KITACO to sell Enigma as well as Takekawa. I will buy it at once if it comes out!
[Others]
I'm going to post a diary of this work in a little bit of a diary, if you'd like to see it.
View detail
AC car
I installed it on XLR80R
Because it is an AC car, it is a 3Pin type of Spec. that the front and rear blinkers light up alternately I processed the Harness that came with the product
The Wiring of LPin is made into two halves and the Plain Type Terminal 110 type is connected, and BPinWiring connects the Plain Type Terminal 110 as is If the completed Harness is built into the Female 110 Type 3PinCoupler, the body of the The LED Blinker Bulb will be available without any changes to
However, if the Pilot lamp is for Both Left and Right, the Pilot If the Valve of the lamp is not pulled out or the rectification diode is not bitten, it does not work normally
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Large strange
Because I wanted Relay to make Blinker's sound
I was looking for them.. I was looking for something that sounds rather than electronic sound, so I finally found it.
It was impossible to attach it directly because the shape of the connector is different when installing. I love the sound Large and I like it very much.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Satisfied Good
I replaced Blinker Bulb with an LED, but since it was originally a vehicle with no Blinker sound, I forgot to turn it off and I will send it to another car
At the time of Right Left Appeal, I was looking for safety and thinking about a relay that sounded. There is Buzzer sound and Cha chi ting sound
It is a type that has few Cha chi.
View detail
good
I attached it to ZOOMER-X, I tried replacing it due to high flasher of unknown reason, I just replaced it, because it is the same shape as the OEM, I just exchanged it. At the same time, I changed the front Blinker to LED, behind Blinker is a normal sphere and mixed with LED but it works without problems. View detail
Satisfied
Parts of this hand are fragile and are looking for second - hand goods but they are attached to ASSY exchanges etc etc and it is saved. I think that there are people who still need it, so I want Manufacturer to continue working hard to make parts of this hand. View detail
The price - - -
I bought it with IMAPSetting. (If you do not buy, you can not do anything) Although I download the manual from KITACOHP, I used 40 sheets of paper to PrintOut. I wanted you to IMAPBody Set. The Instruction Manual was easy to understand, I was able to communicate with PC and write to IMAP. View detail
Software installation took some hours because of com port drivers on new windows-based PC are not easy to start working. Be carefull to install the proper drivers step-by-step as written in manual. Hopefully I am over it and I am happy with the result.
Software installation took some hours because of com port drivers on new windows-based PC are not easy to start working. Be carefull to install the proper drivers step-by-step as written in manual. Hopefully I am over it and I am happy with the result. View detail
Exchange as a result of Blinker LED
As a result of comparing with other companies' product, purchase here because there was a notation with LED correspondence. The terminal of our vehicle was 3-poleStraight Type but our product was 2-pole L-Type so we needed easy Wiring processing.
Although I could make it as a Bullet Terminal terminal, I wanted to use the car Both Sides Connector as it was, so I installed it using ConnectorKit of the same shape. Relay Body has B - L, so if you can figure out the car Both SidesWiring you can install it relatively easily.
There is a feeling that one TEMPO 13? Reacts late at the time of operation, but it does not matter much much.
Although it is our vehicle, because we are installing the Other Company ProductMeter and Indicator, even if we use LED Bulb before and after each, it does not become a blinking defect or high flasher, so each one works normally Purchased and it was Large Correct.. Because fixing also OEMRelay installation place was able to use as it was, we are satisfied with Large in light based on that point.
With expectation also in future durability, ☆ 4
View detail