Reviews
Service Reminder Reset for New Model GSX1300R HAYABUSA
[How is it used?
Recently, many manufacturers have adopted a system in which the Lamp on the Meter lights up when it is time for maintenance.
Various foreign car manufacturers, especially Ducati, are doing this.
But recently, domestic cars are also becoming like that:you have to drop Gold to the Dealer to get rid of the Lamp. Is this part of the Dealer's business strategy? So, even for a simple oil change, if you don't go to the Dealer to have it done, the maintenance Lamp is still glowing all the time.
is Japanese pampas grass, a simple homemade one is all that is needed to solve the problem.
Was the one you received as per Image?
As per Image
It's better to buy it with other things. Since it's only about $100 anyway, the actual store is a better deal when shipping is included.
How was your experience with it?
Effective.
[Points to note]
You have to insert it deep to get it to work.
How did it compare to other products?
Nothing in particular to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
In doing the work, this method is probably a maintenance procedure that is not covered under warranty.
If you want to be stingy with your Gold, please use it only as a reference.
If you are a little worried about the work, you should still buy the OEMReset switch.
OEM reminder Reset switch
09930-83130 Available at Webike, but currently out of stock?
By the way, in most cases, they fail.
It will not respond unless it is inserted firmly and deeply.
Then press and hold the LeftSelectSwitch▼Button to open MENU, select SERVICE, MODESwitch to determine RESET, which is not usually displayed, select Yes when Yes/No appears, and then you can set it individually!
View detail
6V For compatibility with Large type terminals that supply power to MONKEY/GORILLA Main Harness
I bought a battered 900SS (900SL) and am Restore.
The car body was stored in a high humidity environment, so it was also battered by corrosion, but the humidity also entered the inside of the Harness and corroded the core wire in the cord, which was also battered.
Cut the damaged part, create a new Harness, and make a new Connector.
In the end, we had to redo the connector as the center of the connector, because moisture would penetrate and corrode from the area where it is crimped by the terminals in the connector.
When redoing a Connector, play it back in the existing Connector whenever possible.
It's a method of removing corroded terminals from a Connector and replacing only the terminals.
However, if the terminals are corroded, conduction resistance is created and heat is generated, which may cause the ConnectorBody to burn or melt.
Pinch especially Large-type Connectors with Large current flow when they are corroded.
So, this Connector, which is the source of the Large that supplies Battery power to 6V MONKEY/GORILLA Main Harness, was looking a bit iffy, so we replaced it with a new one.
Since it is a standardized product, it is fully interchangeable, and even if it is necessary to replace the harness again for some reason in the future, it can be interchanged without a hitch.
The milk-white Connectors seem to have a tendency to crack over time due to heat and UV rays, but the milk-white OEM Connectors have withstood 30 years without cracking, so I am sure this one will be large and durable.
View detail
Used to extend BlinkerWiring
Used to extend the Right Side wiring as it was too short when replacing the Rear blinker.
Naturally, we were able to extend it without difficulty.
View detail
The quality is good and can be used without problems!
Active (ACTIVE) I purchased this product for Repair because I damaged the Electro Tap of my company's LEDNumberSIDEBlinker. It works fine and the quality is good! As with all Electro Tap products, it is not waterproof at all, so please use it in a place where it will not be exposed to water! View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
Replace from attached terminal
[How is it used?
The terminal attached to GALE SPEED's Clutch holder is Straight Type
It looks ugly as it is (see photo 1), so I was wondering if there is anything better.
I was looking for it and found this!
Was the one you received as per Image?
It was exactly as pictured, nothing different.
Was the installation difficult?
Just pull it out and replace it.
Terminal to terminal connections can be made without problems with crimped pliers and a little bit of skill.
How was your experience with it?
Looks much better (see photo 2).
If you don't care, you won't care.
If you're going to mess with Motorcycle, you want the details to look nice and cool.
The terminals that come with the Parts are perfectly functional, though.
Recomendation because just a little bit of time and effort will improve the appearance of the product.
A terminal is just a terminal, but if a single terminal can change the appearance so much, it is worth replacing it.
[Included Parts:were they on?
None, just terminals and cords.
[Was there anything that disappointed you?
None in particular,
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Flashing relay
Since the OEM of the MONKEY125 is an LED unit, the Blinker with LED bulbs would be a high flasher, so I was looking for a Relay and found a pontoon from KITACO, which saved me a large change.
It was under the Tank, so it only took a while to remove the Tank.
View detail
Older Vehicles on Rubber PartsReplace
[How is it used?
old car (SportsCUB) Used to attach to 6V MONKEY/GORILLA Main Harness at Restore of
Was the one you received as per Image?
Measure the OEM's size in advance and arrange for the closest size.
As a matter of course, I received exactly what was described in Size.
How was your experience with it?
It is a very ordinary ConnectorCover, so it's neither too good nor too bad.
Since different sizes are lineuped, it is nice to be able to choose a close size when replacing parts that are no longer available.
View detail
This is for Bullet Terminal of HondaSmall Type car.
[How is it used?
old car (SportsCUB) Used in Restore of
Was the one you received as per Image?
The Sleeve is also thick and easy to use.
Cheaper ones are usually available, but I would choose this one for its quality of workmanship.
Was the installation difficult?
Electric Works Pliers can be attached if available.
It is no different from a normal Size Bullet Terminal.
[Was there anything that disappointed you?
While not disappointing, it would be better if there was also a Package with a slightly larger quantity and less expensive pricing.
View detail
I would love to see it sold in rolls.
Installed on a GSX-R1000R 2019
Used as Wiring protection for retrofitted electrical components.
Generally, PVCTube is used, but it needs to be threaded before attaching the coupler, and if the wire is long, threading it is also a tedious process.
Furthermore, once installed, it is time-consuming to branch out in the middle.
There are also options such as Colgate Tube and Spiral Tube for wiring that has already been installed, such as Coupler,
Colgate Tube is not very good looking and is not flexible, and Colgate Tube is too stiff to begin with, and may give Damage to Wiring. (especially at both ends)
Spiral Tube is not very good looking, very troublesome to install, and has many gaps, so its protection performance is not very good.
and none of them were willing to actively use it.
That is where this product comes in.
This product is similar to the Colgate Tube in that it is a rounded Habit-attached Sleeve that wraps around the Wiring, so it is easy to put on and take off.
However, this product is different from Colgate Tube,
Cloth-like appearance and high texture
OEMHarness-like atmosphere and not too conspicuous
Flexible and Flexible
Not hard, so it is friendly to Wiring
and Merit everywhere.
It is the best, to say the least.
I am even wondering if I should buy it in Large quantity and Wrapping all the retrofit Harnesses with it.
NegativePoint is ….
If I had to say, it would be the selling method.
Since it is only sold in 1m lengths, it is relatively expensive and not available in lengths longer than 1m.
Also, although there are few situations in which more than 1 m of 1 pc material is needed, it is rare for 1 m to be used up in a good Drill, so a few cm of the SIDE will be Garbage every time.
I would like to see these products sold in rolls of 5m or 10m units.
It is also more eco-friendly, as no scraps are produced.
Anyway, I couldn't be more satisfied with the thing.
Personally, this is my best buy of the year.
We hope Manufacturer will consider selling the product in rolls.
View detail
For repairing faulty wiring View detail
Wiring as usual
[How is it used?
I had been using it for wiring work and bought it at Home centeretc. when I noticed it, but I ran out and had plans to shop at Webike, so I bought it along with the other products.
Fine wire 0.5sq is used for those with low power consumption, while Others basically use this 0.75sq.
[Was the product you received as Image?
It was just like the picture.
I always use the safe Black Wiring.
How was your experience with it?
This is a standard Wiring Cord, so the product is solid.
Emon's Wiring Cord allows you to hook up excess wire with the Holder, so you don't have to worry about it being RoseRose the next time you use it.
【Review】
It is inexpensive, readily available, and of consistent quality.
It is also convenient to keep Wiring together.
I always use Emon's Wiring because it has no problems with heat resistance, oil resistance, etc. for use on motorcycles.
View detail
Racer vehicle to public road Spec. return
[How is it used?
I purchased the Racer vehicle to restore the Headlight Wiring as it had been cut off.
Quantity as there are two lights in the H4Type Headlight.:2pc. I bought a set
Was the one you received as per Image?
Photo
Was the installation difficult?
Installation can be done quickly if you have a certain degree of Wiring processing skills.
I couldn't work with regular Electric Works Pliers when I was cranking, so I used Radio pliers.
However, The top is for Earth, right? Check the wiring diagram carefully beforehand.
The connector is also securely fastened so that it will not accidentally come loose.
How was your experience with it?
Of course, as long as the Wiring is solid, there is no problem at all in lighting the Headlight.
It also engages well with the Valve of Headlight and does not seem to come loose.
[Included Parts:were they on?
It comes with a Connector and the required number of terminals.
[Was there anything that disappointed you?
Not particularly
【Review】
It is good for those who make their own wiring around the headlight and for repairing old OEMs.
The terminals do not come with spare parts, so install them carefully to avoid mistakes.
View detail
Before running short on the way to the car parts store!
I had it in a 20-pack, but I started working on it, ran out halfway through, and had to run to the car parts store.
They are not expensive, so I should have bought a 100-pack from the beginning, considering that I would have lost efficiency if I ran out halfway through the process.
View detail
Unwavering Reliability & Quality 2
Unwavering Reliability & Quality 2
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Unwavering Reliability1
Unwavering Reliability & Quality
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Wiring Protection
Purchased to protect AntennasCable for ETC, though it was a challenge to get it through the Wiring Tube,
Once we got it through, it was ours, and Wiring was a breeze.
It also protects the Cable, so it kills two birds with one stone.
View detail
CRF250L MD47 for ACCWiring extraction
Used on a 2023 CRF250L.
If you remove the Left Side Cover, you can access the upper area of the Accessory Case, where there is a 4-pin Optional Connector hidden by the Waterproof Cover. There is a 4P Optional connector hidden by the waterproof cover.:Since 2pc is ACC, we used this Connector to take out ACC and used it for ACC connection of DAYTONAD-UNIT.
View detail
This is a summary purpose of the branched Wiring.
[How is it used?
To consolidate additional and branched wiring in the front cowl of ADV160.
Was the one you received as per Image?
The size and texture were exactly as shown in the Image.
Was the installation difficult?
Simply remove part of the Cowl and reinsert the Wiring.
How was your experience with it?
It is nicely put together, and since it will also be Cover, we can expect Simple Waterproof.
View detail