Reviews
I don't know if it will fit, but I bought it anyway.
I don't know if it will fit, but I bought it anyway. View detail
For ServiceReset
Recent SEA BASS cars have a sign in the meter reminding the driver to change the oil.
I thought the only way to erase it was to have it reset at the shop, but it was easy even for an individual.
The connector hole was too small and the needle gold was too thick to fit in the connector, so I used Emon terminals.
OEMs sell specialized products, but they are expensive, so this was sufficient.
View detail
For Wiring processing
Purchased for use in Wiring process. No problem. View detail
Fits: SUZUKI gsx1100s katana [katana]., SUZUKI GSX750S KATANA [Katana]., SUZUKI gsx1000s katana (all years), SUZUKI gsx1000s katana (all years)
Starter RelayHarness handling
Depending on the year and the Type of Starter Relay, the Harness handling may need to be changed.
In my case, I solved the problem by handling it as shown in the photo.
The Right Side Cap was purchased and installed separately.
I think it would have been perfect if there was a hole for the harness to go through like OEM Product.
View detail
Emon for peace of mind
I bought it because I want to stop Bullet TerminalWiring for good.
Various Wiring teasers are Quantity:It might be better to buy a Set, but I think buying Rose is a better deal at the moment because you end up with a surplus.
View detail
Kiboshi Terminal Set
Quality and Texture Information Typical Jiboshi Terminal Set Full of Male Terminal for usability Product Inquiry Crimper To Buy With, Female Terminal Easy to install Cost performance and comparison sets with other products are affordable WeBike packaging is always great. Arrives in a week for delivery and packaging I ordered it after looking at the word "set" to see if the translation was wrong when I bought it, but only the Male Terminal came and checked the site again, and the notice came up that there were 8 Male Terminals. I need to order again because it's internalism. It goes well with Honda View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Connector Replacement
The item used was old, dirty, and tight when removed, so it was replaced with a new one. It is very helpful that only the type I want is sold as a single item. View detail
exchange
Since there was discoloration and deterioration of the used products as the terminals were reconnected, the Cover was also replaced with a new one while it was being used.
Since it is a Single Item sale, it is good for purchasing only the quantity you need.
View detail
Cover
When the terminals were re-installed due to wire breakage, the cover was deteriorated and discolored, so it was replaced with a new one together with the new cover.
Single Item sales and reasonable prices are good for those who want to purchase only the number of items they need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring Connection
I had disconnected the Wiring and used it for branch connection.
Single Item sales are not expensive, so you can buy as many as you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Connection
Used to connect Power Supply Cable.
It was helpful to be able to purchase only the 110 Receptacle coupler and Pin in Single Item.
View detail
I used it for storage for my own Wiring blindfold.
Plus and Minus lines from Relay, which I made myself in NINJA.
Grip heater, YOSHIMURAProgress2Meter and USB power supply with Bullet Type Terminal
It is connected, but has been left bare until now.
I left it as it was because I basically don't ride on days when it rains,
I'm concerned about the Red Wiring glancing through the gap between the Cowl and Handlebar, and I'm not sure what to do with it.
I purchased this product to conceal and store the Bullet Terminal part.
6Quantity:The Large size was sufficient to hide the Bullet Type Terminal of Set+Alpha.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring Connection
I am repurchasing for Wiring connection.
Since the terminal and cover are sold as a single item, you can purchase only the number of items you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring
This is for spare Wiring connections in case of failure.
It is helpful to be able to purchase only the number of items needed because they can be purchased through Single Item sales.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring terminal
I am buying more here to redo the Wiring terminals.
The terminal is sold as a Single Item with a Cover, so you can buy only the number of items you need.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Repurchase
I am buying more Wiring for redoing.
It is helpful to be able to purchase only the necessary number of items, which is not bad since single items are sold at the terminal and cover.
It would have been nice if they were sold with the same Gold terminal as in the photo shown.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Wiring
It is used to redo ConnectorWiring.
Single ItemConnector, sold by terminal only, so you can buy only the Type you want.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
spare
I purchased this as a spare to do a branch of Wiring.
Single items are sold, so it is helpful to be able to purchase only the necessary number of items.
View detail
For branching
This is for use as a branch of a power supply.
110" 2PConnector, Pin Quantity:Set, but it would have been enough if we could have connected with other cheaper ones.
View detail
Replace with new Connector
The Coupler I was using was discolored and hard to remove, so I purchased a new one to replace it.
Male, MeSpin, and Coupler set items were inexpensive and saved me a lot of money.
View detail