Reviews
Thick, heavy, high quality
This is better than the cheap ones offered by generic chinese sellers. The color is deep black and looks better in real life in the pictures on webike suggest which look kinda grayish. The price is even cheaper than the OEM moles. One of the best finds on webike. I recommended many friends to get this rim to protect their tanks. View detail
I will have a tight fit
I have to hit a little bit, but I will have it tightly accordingly.
Because it is easy to bend, it does not float frantically, it comes with Exactly Firmly.
If you remove it will peel off the paint.
View detail
Good batch
Used for Tank exchange of W650. Old car feeling is perfect. Since it is necessary not to stagger or remove Tank when exchanging Plug, it also helps to prevent Wound.
Installation was tapped lightly with 100 hrs of Rubber hammer. It was hard to push it with your fingers. The part of Tank's Neck may be difficult to install with Tank attached to the car body.
I bought 2 Meter, it is about Tank 1 lap.
View detail
ETC power connector is perfect.
Because JRC's ETC power supply ConnectorMale side was damaged, I was looking for a conforming MT 090 Connector, but I found this product and purchased it. Eiring Works Pliers is necessary for Wiring, but it was easy to do without making a big difference between machining of a normal flat terminal. I tried into ETC on the male side Connector of Power Cord, but it is perfect. Waterproof, so do not worry about using it in rainy weather, as with OEM Product etc. It became possible to use.
When inserting the terminal into the Connector, it is easy to insert it by mistake in the top and bottom, so it is necessary to be careful, but if you make a mistake it is easy to fix so it is easy to fix.
There is not much treatment in other NetShop and it is saved because we handled it with Webike.
View detail
With High Solo exchange!
I bought ActiveUniversalThrottle kit to install it on Grom. When diverting the Magma 50 Switch Box of Honda OEM Product from Grom OE MSwitch box, it is necessary to convert it to Connector on Grom side. Switch boxWiring diagram will hit by Net search. There is a User who is explained in a very easy-to-understand manner, so it was helpful for Wiring work. Along with the High Soloization of Grom, OEM's Switch box to Other Company View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Before and after KDX Blinker LEDization
Mounting on KDX125SR.
Since KDX 125 is 12 VDC after A 2, it is easy to make Blinker LED.
Compared with other companies the price is cheap and easy to use.
Since KDX employs a system in which front and rear Blinkers flash alternately to suppress the burden of power
Bridge the car body side Blinker + and connect it to the Red of Relay,
Key ONWiring (Brown) And RelayYellow color.
The surplus Black crimps the muzzle terminal and the Body ground.
As a result, it will blink simultaneously before and after, but I think that there is no problem with power.
View detail
Satisfied
Parts of this hand are fragile and are looking for second - hand goods but they are attached to ASSY exchanges etc etc and it is saved. I think that there are people who still need it, so I want Manufacturer to continue working hard to make parts of this hand. View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
There was not any problem.
Since Standard's Blinker was damaged, I exchanged it to Blinker of DRC, but in Relay of Standard, the High flasher phenomenon occurred, so I exchanged this Relay.
After exchange, High flasher phenomenon also fits and Blinker blinks normally.
There was no problem at the time of installation.
View detail
As I thought
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Software installation took some hours because of com port drivers on new windows-based PC are not easy to start working. Be carefull to install the proper drivers step-by-step as written in manual. Hopefully I am over it and I am happy with the result.
Software installation took some hours because of com port drivers on new windows-based PC are not easy to start working. Be carefull to install the proper drivers step-by-step as written in manual. Hopefully I am over it and I am happy with the result. View detail
I want to prevent the ingress of rainwater
Solder I wanted to prevent water from entering the part I bought.
It seems a bit low with Dryer's fever,
Taking care, I shrunk with Cooker's fire.
Various Color (5 colors) It is convenient because there is.
View detail
This product is very easy to use, I was connected to the ignition coil, shock-resistant, but also a little bit of water use, I will recommend a friend to buy again. *** This product is very easy to use, I am connected In the coil, it is resistant to vibra
This product is very easy to use, I was connected to the ignition coil, shock-resistant, but also a little bit of water use, I will recommend a friend to buy again. *** This product is very easy to use, I am connected In the coil, it is resistant to vibration and has a slight waterproof purpose, and I will buy it again. View detail
OEMConnectorSpec.
Fender Eliminator (Magical) I bought it for Wiring of License Plate Light. In the past I connected to the same model with the Bullet Terminal terminal, but this time I made it possible to plug into the OEM Coupler. The difficulty was that Coupler's terminal jacks were Small, so even if we used thin wires, it was hard to get into the specified depth and I was in trouble..
In my case I pushed it with a Small Slotted screwdriver, I feel relieved when I get in to Pushingon.
View detail
Purchase
I purchased Screw for Blinker and Tail. We exchanged Tail's Screw from OEM's iron object to this Stainless Steel's one. Iron Screw does not rust if it is being carefully changed, but it exchanged for the appearance priority. View detail
Used for MONKEY
Honda car Bullet Terminal is dedicated Size unlike Homsen and Universal, so I bought it. Although it is from other Manufacturers, I bought it because the best Cospa was good. It is a useful item and I am allowed to use free shipping fee of 3000 yen lol View detail
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike View detail
Used for MONKEY
I bought it to make Wiring of MONKEY neat. I used Bullet Terminal which I sold in Homsen etc. before, because the Size was different, I had a difficult time, so I got it properly for Honda this time. Lol
MONKEY is worried about water because it has many exposed parts. Waterproof Specification etc. are out from other Manufacturer, but we do not ride with basic rain and COSPA is good and I made it here.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
It is the same shape as YAMAHAOEM!
I was looking for an LED compatible Relay to replace SUPER JOG Zr 3 YK 's Blinker bulb with LED Bulb and I stopped my eyes on KITACO' s Relay and bought it.
Compatible model "Address" However, it seems that it looks like Size, shape, Coupler terminal is L and not T type, appearance is almost, "YAMAHAOEMRelay" That is it.. "SnapSnap Sound" Than YAMAHAOEMRelay, "Large KI will hear" The operation is quite normal.
Although JOG is made into Hazard, blinking of 4 lights also works normally without problems.
For vehicles without Indicator this "SnapSnap Sound" It is inconvenient if there is not!
View detail
SR Tank lacing braid style
SR 400 FI's Tank lacing braid is only malled around the Oil cap, somehow seems halfway and buys this.
I tried installing it, but the shape is almost the same as OEM Product so it looks completely uncomfortable.
Also when removing Tank and putting it on the floor it will also prevent paint peeling off at the bottom.
View detail
OptionCoupler
By installing ETC, you can install it without damaging the OEM's Wiring. Basically I do not like interrupting OEMWiring and connecting it. I had a hard time finding out. View detail