Reviews
KIJIMA KIJIMA Self-wrap Sleeve
The coupler can be wrapped directly around the wiring for easy installation without the need to cut the wiring or remove the coupler.
It is available in several thicknesses, making it ideal for dress-up.
View detail
Required to convert CUB and CD50 to BlinkerLED!
[How is it used?
When I purchased and installed LED bulbs and Relay to convert Blinker to LED, it turned out to be in a state like Hazard, and when I investigated the cause, I found that it would not light properly unless I interrupted the Wiring of the Pilot lamp with this rectification diode.
Was the one you received as per Image?
Two Wiring with nicely coated Diode were in the box.
Was the installation difficult?
First of all, electric pliers and terminals must be mounted as part of the Wiring process.
Next, it is necessary to interrupt Wiring to the Indicator Lamp.
How was your experience with it?
It now lights up correctly!
[Included Parts:were they on?
There is nothing, but the direction of current flow is indicated on the box.
[Was there anything that disappointed you?
Not at all.
If you have ▼BlinkerBuzzer attached, you will need this Wiring separately.
View detail
Bullet Terminal for Motorcycle
I searched several mass retailers for a CB103 Honda type Bullet Terminal for my motorcycle, but could not find one, so I searched webike and found it. I searched webike and found it and bought it. Thank you very much for your wide variety of products.
The Bullet Terminal for Motorcycle is small. (I didn't know)
As for the product, it is an ordinary Bullet Terminal and I have no particular impression of it.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
It is good to be Small Type
I had bought another Relay before to replace the Tail Lamp LED, but it broke and made a cracking sound when I fell down or did something to it. I thought it would be better to buy the same one, so I bought DRC's Relay this time.
Installation is easy because of its small size, but it does not come with a connector, so it must be purchased separately.
We'll have to see how durable it is, but it's DRC, so I have high hopes!
View detail
Key cylinder broken and replaced
It is cheaper than buying OEM product, and it is good because it is with Tank Cap. View detail
I don't know if you will use it right now, but you should definitely Stock it.
We assume that those who purchase this product here already have a specific purpose of use in mind.
However, I do not have or have never used one that I would recommend.
Locking Wiring Band is used not only for Wiring but also for various Situations.
If you do not have it at that time, you may interrupt not only the work efficiency but also the work itself.
Therefore, we strongly recommend that you keep several similar products in your Tool Box.
WiringTools, as represented by this product, are also very useful to have in everyday life.
It is also a first-class Manufacture product, so again, if you don't have it, you should get it.
View detail
Emon for peace of mind!
I use it to bundle Wiring, and although it is a little more expensive than the 100s, once I bundle Wiring, I never know when I will touch it next under Cowl, so I try to use Emon's, which is a little more expensive, but still reliable. View detail
Fits: Others KEIHIN(KEIHIN)PWKΦ28MCarburetor, Others KEIHIN PWKΦ28Carburetor(Old type), Others KEIHIN(KEIHIN)CRMINIΦ22Carburetor
for PC20.
I lost this part for PC20 and was looking for it for sale in Single Item.
It was helpful to have it available in Single Item.
View detail
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650. (The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion
The product of a kitaco is TSU which is only a product saved cheaply and joyfully!! Custom-made plan of the blinker of W650.
(The 1) TSU which is appropriation wearing about the blinker of 250TR W650!! First of all, it is exchange about the conclusion screw of the blinker lens of 250TR.
Since an authentic positive one is iron and it is easy to rust, parts are replaced to the tapping screw made from a stainless!! YO from which the tapping screw for the pure blinkers of a zephyr system or a vulcan system is incidentally also set to M4x25.
We did two-piece (a total of 8) acquisition of the product here, and were taken as the screw of the blinker lens of order.
*) -- The stock case of W650 becomes the relay of 12V/15W.
Relay exchange becomes indispensable when diverting the blinker of other vehicles to W650.
Relay #27002-1101 for 12V/21W (product blinker conversion-code made from posh is followed.) = Kawasaki original manufacturer's product
.
.)
View detail
flame resistance
When installing the Oil Temperature Meter, we used it in place of insulation because the wiring passes close to the Exhaust System.
Insulation and flame retardant are different, but it seems to be Large sturdy up to 95 degrees, so I installed it thinking that it is better to have it protected than not.
This is recommended because it improves the appearance as well as the protective function.
View detail
The quality is good enough for my needs!
Emon is a friend of the common man!
It is Exactly for extending Wiring, adding Grounding Wire, etc.
I think any Wiring can be covered by crimping a separate terminal to this cord.
View detail
There is no problem
It is a good product in general, and I chose it because I imagined it would be more resistant to deterioration over time than the White color. View detail
It is stiff and helpful.
Since the clutch lever, wire, and routing, etc., have been replaced, it may be that the mounting points are subjected to forces in odd directions, or it may be that the quantity has already been reduced.:2pc. Set ruined.
The clutch can be cut without it, but it is smoother with this cover. As other reviewers have mentioned, if the installation method is correct, there is a little bit of hang.
I have one squishy one a year, but I always Stock it because of the price. I really appreciate the fact that you can provide these parts.
View detail
When in doubt, just go to Emon
[How is it used?
Used to install LED Fog Lamp on FZS600.
Was the one you received as per Image?
Since this Relay is compact in size, you should have no trouble finding a place to mount it. In this case, I installed it inside the Left side cover.
Was the installation difficult?
The instruction manual is easy to understand, so I don't think you will make a mistake in assembling the wiring. It was more time-consuming to put the wiring around the car body.
How was your experience with it?
No problem at all, the light came on easily. I have driven more than 5000km since installation and so far no Trouble has occurred.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:The length of wiring should be comfortable.
Availability and comprehensibility of Instruction Manual:The package is mounted with a detailed and easy-to-understand Instruction Manual.
ITEMS TO BUY TOGETHER:Electric Works Pliers are useful for handling the connection terminals of Wiring.
View detail
Mixed use of LEDs and bulbs
The front blinker by the OEM bulbs had burned out, so I replaced only the front with LEDs, but the OEM flasher would not stay on.
Therefore, the front is LED and the back is a mixture of LEDs and bulbs, but they are blinking properly without any problem so far.
The LED Blinker is from NC Racing CNCRACING and the resistors are also from NC Racing CNCRACING.
View detail
Convenient for Wiring pulls in Cowl!
This product is useful for pulling Wiring in Cowl. The needle gold is moderately hard, and the loop at the tip firmly guides the wiring! View detail
I used it for maintenance of Coupler.
I bought this product for maintenance of my old Coupler. I knew Emon was the one who covered these products! View detail
Dress-up
It can be attached to the Edge of the Fuel Tank to create a Classical atmosphere.
It is a good product for preventing scratches on the tank when attaching and detaching the tank.
View detail
It can be attached and detached many times with CoilType.
This product is CoilType and can be reused many times, making it eco-friendly and wallet-friendly. The color is a safe black, so it blends in with OEM product cords and does not stand out. View detail
It is strong.
Material:Stainless Steel makes the Bracket sturdy.
It is also resistant to rust, so it is safe to use externally, such as for Horn installation.
The size is just right and fits in a small space with Refreshing.
The solid thickness and stainless steel make it durable.
View detail