Reviews
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
I bought this as a trial for Spare for Wiring.
I wanted to buy the Gold color for Spare for wiring, so I bought this one in Male and Female.
Things are usually fine.
Is the price of Single Item cheap? Or is it too expensive? The price for Single Item is cheap or expensive.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Buy Single Item
I wanted to buy a Gold color for Spare for Wiring, so I bought this one to try.
Things are usually fine.
Is the price of Single Item cheap? Or is it too expensive? The price for Single Item is cheap or expensive.
View detail
For Wiring
I bought this for redoing Wiring.
Gold type、Quantity:I bought this one because I thought it contained the number of pieces in Set.
If you can choose Male, Female, and the number of items, and purchase them at a lower price, it would be very helpful.
View detail
For Power Distribution Wiring
It is a purchase together with Connector to do Wiring for power distribution.
I didn't need that much length, but I had no choice.
It was also sold in the nearby Shop, but the price was a little higher here, so it was a hassle to buy it together.
View detail
For Wiring
I bought this with the Connector for Wiring distribution.
I didn't need that much length, but I had no choice.
Wiring is a purchase of Red to identify.
It was also sold in the nearby Shop, but the price was a little higher here, so it was a hassle to buy it together.
View detail
Looking forward to the performance…
I used it through the Controller's Wiring of Sub computer.
I used it for the USB cord to connect to my PC for setting, but I was worried about the heat because I had to put it along the frame.
I did the construction with this Self-wrap Sleeve expecting the flame resistance and the heat resistance. So far, the problem has not occurred, so I guess we'll see.
View detail
Fits: HONDA CB1100 F (SC11), HONDA CB1100 R (SC05), HONDA CB1100 R (SC08), HONDA CB750 F (RC04), HONDA CB900 F (SC01), HONDA CB900 F (SC09)
Color
I bought this for Wiring.
The color is different from others, so it's easy to identify, and it has a waterproof cover, which is good, but it's a little expensive in terms of cost per 1pc.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Please tell me. (_ _) I can't get it to work.
I installed a LEDICRelay made by MOTO LED and the Blinker did not respond.
The other day, when I installed DRC's LED Fender Eliminator Kit, KITACO's Unbreakable lensMini Blinker on the front and rear of KLX250s, High flasher phenomenon occurred on the blinker. I installed the LEDICRelay made by Moto LED, but the Blinker did not come on.
Are there any other necessary parts that I need to install? Please let me know if you have any knowledge about this. (_ _) m
View detail
It helps in times of need.
It is very useful to have one in your tool box for installation of electrical components, and it is convenient to extend the wiring and free the installation location of the body of the electrical components. View detail
From self-satisfied Blinker LED's to mixed LED bulb specs are OK.
important item
[Was there anything that disappointed you?
When Blinker starts blinking, it is ONStart, but sometimes it only lights up for about 0.1 seconds.
Do you have any wishes or improvements you would like to make for the Manufacturer?
Make sure the GunBatte resistance-free LED bulb is set to Relay onStart.
[Do you have any products to compare it to?
DAYTONA LED Corresponding Blinker Relay
Frequently Asked Items
What made you decide to buy?
I tried to make a high reliability LED blinker with a normal blinker lens.
The point is that I wanted to use only LED bulbs, and I wanted to use LED bulbs that don't have resistance.
When I bought it, Daytona's was not yet in stock, so I went with this one.
Also, I had accumulated Webeike Points & the POINT deadline was coming up. (*´yeah*) pop
How was your experience with it?
It was no different than NORMAL with 85 flashes per minute (I was hoping for that kind of thing).
I noticed after a while of using it, but it is not always ONStart, and sometimes the light comes on briefly for about 0.1 seconds before it starts to blink.
Was the installation difficult?
No. It was totally Bolt On.
【Please tell me the installation point and hang】
What? Do you want me to write that again? (//∇//)
My motorcycle simply removed the NORMAL from the Connector and replaced it in its original position.
[Was the Instruction Manual easy to understand?
I wasn't having a problem with that.
[Included Parts:were they on?
Yes! It came with a FemaleConnector with Wiring for processing.
If you can use a solder or crimped pliers with a different connector shape, there will be a wider range of models to fit.
[Others]
While working, I checked and it worked with a mix of LED and White heat bulbs.
It's definitely not ONStart0.35 seconds on Relay, so it's sharp at the same time as Blinker. (!!!) It is not suitable for those who want to change their career path.
The same trend seems to be true for DAYTONA and other companies' LEDRelay.
In the case of the above symptoms with DAYTONA or other companies' Relay, it seems to be possible to solve the problem by using LEDs with resistance or white heat bulbs, but of course LEDs with resistance are more heat resistant, and if you turn on the hazard for a long period of time, the LEDs may go down.
Therefore, I will use it as is for a while.
In addition, BlinkerLED was changed to BlinkerLED, but because of the replacement of only the ball, the appearance does not change and the satisfaction level is the same? It was a W
There are a lot of external LED blinker kits available on the market, but they are not noticed by people who don't know about them, and even if they are sequential or high-sidered, they are not noticed. ” It is a self-congratulatory dress-up in the state.
It's a good idea to go back to the basics and customize your car to meet the safety standards while still being easily recognized by other cars. (Regardless of the laws and regulations, as long as the car is on a public road, it's up to the officer in charge and the inspector to decide what to do.
View detail
It's long enough.
I needed an extension of the Grounding Wire, so I prepared it. The quantity is long enough to last a long time. I love it because it is effective in heat and impact resistance and can be used anywhere. View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I couldn't install it because I overlooked a key point.
I bought this to use on my WR250F, but I didn't read the instructions carefully and ended up not being able to use it ……
It's a product I didn't have to buy because it worked fine without this ICRelay on the WR.
I don't know when the corresponding vehicle will be available to me, so I'm keeping it just in case, but if I have a friend who wants one, I'll give it to them.
The thing itself is very carefully built and seems to be quite durable, as it is an Off Car Main brand.
View detail
I'd like to use it invisibly.
It is better to use it when you deal with a thin wiring, or when you want to make it crawl for a long time. It's not cool to see the caterpillar, so it's the place to show your skill to hide it.
To some extent, I think it's better to buy these things in each Size at once.
View detail
Used in 790DUKE's Rear blinkerCoupler
Things work fine.
However, it is not possible to crimp cleanly with ordinary Electric Works Pliers.
2.You will need Electric Works Pliers that can caulk 0mm
View detail
Electrical Materials
It doesn't matter if it's at Emon or KITACO, but it's nice to know that it's available at the mass merchant when I need it.
The wire itself and Heat Shrink Tube, etc. which are frequently used have stocked a certain amount at home, but as for Connector, because what I use each time is different, I place more importance on the availability which is readily available.
If I had to say, I'd be grateful if there was a Black color rather than a White color.
View detail
Well, it's okay
I used it to get around the cords for the electrical components I installed later It keeps the wires together and looks better, and it's a good way to get through hot or narrow places I think it's good for wiring protection View detail
For Blinker processing
Purchased to install Hazard
You can buy a Diode and assemble it by yourself, but it's a hassle to put a solder on it It would be helpful to have such a product
I don't have a Blinker LED, but even if I did, I would be able to help you Parts
View detail
The choice depends on the location
As for the Fuse holder, it is an expensive category that comes with a Large, but it is not a water-proof case It gives you a sense of security
It can also support large currents
Other Fuse holders are fine for places where water will never splash, but there is a risk of water splashing on them Then you might want to choose this one
View detail
I wonder if they're good
The first time at Crimp, Wiring on the main line didn't get stuck in the Bracket's notch and ran off to the side It did not energize
The forked line was stuck in a cutout
I had to do four places, but the Waterproof Gel was removed because I had to redo the main line part at all four places It was
Be careful not to crimp the main line against the notch, otherwise Wiring will escape is needed!
If you know that the wiring will run off to the side, the wiring will fit properly in the notch I think everything else is fine as I work to make sure it is
If you don't know in advance, you may not be able to go one-touch
View detail
I was able to put together Wiring in a nice way
I used it to put together a voltmeter wiring I purchased a 5.5" inside diameter, but it was thinner than I expected and I was concerned about the durability of the Large Quantity from Battery:It was a 2pc line, so I was able to put it together without any problems It is crawling underneath my feet, but it seems to be in harmony with the black color of the flat stayup This is a good example of how to make a good quality product I've been using them for a while now, and I've been using them for a while now View detail