Reviews
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
periodic replacement
I installed it to prevent foreign matter from entering the tank, and it is about time for regular replacement. The price is not that much, I can see how dirty it is, and it is easy to replace, so I think it is easy to use. View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
Will we know if it's good or bad after riding it for a while?
I put it between each Carburetor from the Fuel Cock, but the Filter itself is Slim, so it doesn't feel out of place.
I think it is a good product because it is transparent, making it easy to detect foreign objects.
View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
Small Type
Small type as a fuel fliter, and since it is a paper base, it is the one that you should be most careful about in terms of narrowing down the flow rate.
However, because it is a Small Type, there are many cases that are convenient for placement.
View detail
Fuel Hose for old Scooter
When replacing the Fuel Hose on an old Scooter, I installed this Fuel Fliter to kill two birds with one stone, since bending the Fuel Hose to 90-degrees eliminates bending of the Hose. The fuel flow is also visible, so maintenance is easy. View detail
As a precautionary measure.
I used it on a MONKEY Fuel Tank that I had rusted off.
I had the tank rusted and the holes repaired, but I wasn't sure if the Garbage, Sludge, etc. were completely removed, so I put it on.
It certainly seemed to work, but as a result, the Filter itself became clogged with Gas and became unusable.
Thanks to you, there is no inflow of impurities into the carburetor and it works (laughs).
View detail
Larger than expected
If you have a car that doesn't have a space, you can install it, but it will be a bit messy and unparenthesis. Garbage removal performance is fine. The flow rate is also fine. View detail
Select the carburetor to be used depending on the flow rate.
When I use this filter on a Motard 115 with PE24, I don't get any air bites in the filter if I don't open it all the way, but if I pull it all the way, the gasoline supply can't keep up with the filter and it's completely useless.
It is not suitable for the car that uses the fuel cock of the fuel hose of φ6, so it is necessary to pay attention.
View detail
Installed on gsf1200
Note the heat near the Engine.
Curled …
I didn't even get a Paper-type stinker.
It was good, though.
View detail
Filter
I've installed it to prevent garbage from getting into my car, and I don't have any problems, but it's a bit large. I think it is a little large;
This is a spare, next purchase for Replacement.
I would like to buy something else next time and try it.
View detail
Sub tank.
I'm using it in a Sub tank I made myself with an oiler and some leftover fuel hose. I cleaned it before use, but I installed it so that dust from inside the Oiler and Hose would not go to the Carburetor as it is not used frequently. I can't say for sure how effective it is, but I use it just in case. View detail
for Replacement
I bought it because the product description said it was for Hose I.D. 8/9mm, but the Package of the actual product has a compatible Hose I.D. 8mm. I wanted to have Φ9 correspondence. At any rate, I put it on and will try to see, but it may be a little too small.
The thing is Compact and it doesn't look bad.
View detail
I chose the Magnet type.
I tried to remove the rust from the tank, but it was not done properly, and there was a clogging of the carburetor jets with fine iron powder.
It doesn't remove 100%, but I think it's more effective than just Mesh filterType.
However, the durability of the body is not good, and the insertion port broke from the root when removing and installing Hose in about one year.
View detail
Easy to use, but the price tag?
Smallish paper disposable fuel filter (Part number 96452) 。
For some reason, this one is more expensive than the Large Kisa one, which is easier to use than the Large Kisa one, so I feel the manufacturer's intentions.... It is installed between VT Normal engine and OEM cap
This type is to be discarded and replaced with a new one after a certain amount of use
I used it in a reasonably good tank after the rust removal treatment and it stopped running after 16,000 km because it got clogged I did Not just rust, but Gasoline scum? The eyes seem to get clogged up with For your information
There is also a larger size type, but if the flow rate is higher than this, you can use the It's in the Instruction Manual, so you can install the Big carburetor, etc If you have concerns about fuel shortages, please be aware of them
Also, it has been functioning well by removing the fine rust that came out of the tank little by little It is Definitely recommended if you have an older vehicle and are worried about Tank rust
View detail
★Attaka★Filter
To be honest, I don't know the effect that you can feel, because it's a Scooter, and Tank is a poly-Tan so it's not a problem as long as you're careful about foreign objects when refueling, but the iron Tank You will notice the rusty appearance of the filter as it is clear When installing this filter, do not use fire! It can cause your motorcycle to become very hot View detail