Reviews
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
A Harley must have!
With the HarleyShovel Fuel Cock breakage and carburetor overflow, we decided to install this Fuel Filter.
The inside diameter of the hose was 7.9mm, so it took some force to insert it.
KIJIMA's Fuel Filter was previously installed on an XL1200C SPORTSTER 1200, so you can be assured of its quality.
I think this MODEL will MATCH Harley in particular.
Shake condition while driving due to severe Engine vibration.
Filter function is fine.
Since it is glass, the Hose was secured with Tie Wrap to prevent it from hitting the Cylinder.
I am satisfied with Large because it looks good.
View detail
Can be visualized
I have had no problems without using Fuel Filter until now.
However, I saw someone I know wearing it and bought it to try it out because I could visualize the iron dust-like substance being removed.
Installation takes only a few minutes with no problems. I recommend it to anyone who cares to visualize it.
View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
for Replacement
I used to install disposable Type, but I bought this one because it looks good, I can reuse it, and it's easy to check the condition inside. It is easy to check the inside condition. I hope it will last for a while. View detail
I'm putting it on just in case.
It is installed on the Carburetor to prevent foreign matter from entering the Tank and clogging it. Since there was no particular problem until now, I repeated the same thing. This time, when I cleaned the carburetor, I replaced the fuel hose with a new one. I decided to replace the fuel hose with a new one because I don't want the gasoline to leak out while driving. Garbage has never accumulated in the Filter so far, but I'll use it just in case. View detail
04 Used for ST250E
With windmill, changed from Mesh.
No flow problem. carburetorNORMAL.
The other thing is durability.
I thought it would be cosy.
View detail
Make the most of the small space.
I bought a Straight Filter, but I changed it to this one because the hose seemed to break due to its handling.
When I used it in an image to put in the part that seems to be broken, the handling of the Hose is no longer unreasonable.
However, the Filter section is not very reliable.
It's a good idea to have a with Magnet L-Type for 6?hose because the body can be a bit larger.
View detail
easy to deal with
I bought Straight Type with Magnet and tried to install it, but it was impossible to handle it, and it seemed to cause Hose breakage at the part where the R was too tight, so I bought this one.
It's easy to use and has a high degree of freedom in handling.
I'm a little worried about its ability as a filter because the Size is small and there is no Magnet in it.
View detail
One
There were two Filters in the image
Quantity without permission:I thought it was 1 Set of 2pcs
Other than that, it looks fine
View detail
Parenthesis is good
I used it on my 2004 SR400, the texture of the gold is good and it's really cool But it's bigger and heavier than I imagined
I connected it with the fuel hose of KIJIMA, but it had a hard time to handle It is big and the hose is broken
I may be the only one, but the top and bottom gold genus parts were loose when the package was opened It's a good idea Gasoline will leak if it is installed without being opened Please re-tighten it
The basic performance and looks are really good
View detail
OEM and above
no matter how many times I cleaned the carburetor, the rust would come off, so for now, the Fuel fliter I bought it to replace the Essentially, the rust is from the Tank, so I had to treat the Tank for rust first, but time As a band-aid, since there is none
When I took apart the OEM Filter, I found the magnet, but no Filter The Garbage that the magnet couldn't get rid of must have fallen into the carburetor The product I purchased has both the Filter and the magnet, so for now, it's safe & secure hellip;… I think But it's a little bit larger than the OEM Filter, so it's pretty much a limit on the size of the Filter Maybe it's interfering somewhere …… …
View detail
small and CLEAR Fuel Filter
i need clear fuel filter to look close the quality on fuel, selling from near gas station KIJIMA FUEL FILTER is Small but looks very clear to look how much gasoline drops and how look like the fuel colors, one day i think they make more a bit big filter that would be great item to me because is so small View detail
That's not a good thing.
Since it is an old Motorcycle, soiling in the Fuel Tank is anxious, so I attached the Fuel Filter to filter it.
With this I am relieved, it's possible to do it for about 15 minutes working time ~ (゚∀゚)
View detail
It may be too large for SR 400
Because OEMFuel Cock of SR400 is φ6 and FCR Carburetor Body is φ8, I thought that there is a filter which also serves as a conversion connector and I bought this product for φ6 φ 8, but I am surprised to hear that the Large is large and Fuel Hose kinks between Cook and carburetor I did it.. Capacity is Large, so it may be good if you are assembling FCR Carburetor Body with other car models, but SR 400 is a Large rinse. View detail
It looks good too
Hose was disconnected due to deterioration of OEMHose due to desorption of several tanks.
I bought it as a Joint for cutting.
It looks well and Large is also good feeling.
View detail
Because it is an old car
Since it is a 90-year Motorcycle, I am worried about the inside of Tank and inject cleaning agent
We also installed this Filter.
It is good to see the inside.
If you use it, you will see the color gradually dull.
View detail